Accident tolerant fuels for LWRs: A perspective

Abstract The motivation for exploring the potential development of accident tolerant fuels in light water reactors to replace existing Zr alloy clad monolithic (U, Pu) oxide fuel is outlined. The evaluation includes a brief review of core degradation processes under design-basis and beyond-design-basis transient conditions. Three general strategies for accident tolerant fuels are being explored: modification of current state-of-the-art zirconium alloy cladding to further improve oxidation resistance (including use of coatings), replacement of Zr alloy cladding with an alternative oxidation-resistant high-performance cladding, and replacement of the monolithic ceramic oxide fuel with alternative fuel forms.

[1]  R. E. Schenter,et al.  Status and future for ANSI/ANS-5. 1 decay heat power in light water reactors , 1990 .

[2]  R. Sakidja,et al.  Oxidation-resistant coatings for ultra-high-temperature refractory Mo-based alloys , 2009 .

[3]  Ralph O. Meyer.  An Assessment of Fuel Damage in Postulated Reactivity-Initiated Accidents , 2006 .

[4]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[5]  Steven J. Zinkle,et al.  Radiation Effects in Refractory Alloys , 2004 .

[6]  L. Snead,et al.  Microencapsulated fuel technology for commercial light water and advanced reactor application , 2012 .

[7]  F. Nagase,et al.  Behavior of Coated Fuel Particle of High-Temperature Gas-Cooled Reactor under Reactivity-Initiated Accident Conditions , 2010 .

[8]  B. Cockeram,et al.  Irradiation hardening in unalloyed and ODS molybdenum during low dose neutron irradiation at 300 °C and 600 °C , 2008 .

[9]  Steven J. Zinkle,et al.  Advanced Oxidation Resistant Iron-Based Alloys for LWR Fuel Cladding , 2014 .

[10]  R. O. Meyer,et al.  Cladding swelling and rupture models for LOCA analysis. Technical report , 1980 .

[11]  Y. J. Kim,et al.  High temperature oxidation of molybdenum in water vapor environments , 2014 .

[12]  P Hofmann,et al.  Current knowledge on core degradation phenomena, a review , 1999 .

[13]  Steven J. Zinkle,et al.  Materials Challenges in Nuclear Energy , 2013 .

[14]  I. Catton,et al.  Quantifying reactor safety margins part 1: An overview of the code scaling, applicability, and uncertainty evaluation methodology , 1990 .

[15]  G. Subhash,et al.  Enhanced thermal conductivity of uranium dioxide–silicon carbide composite fuel pellets prepared by Spark Plasma Sintering (SPS) , 2013 .

[16]  J. C. Brachet,et al.  Hydrogen Content, Preoxidation, and Cooling Scenario Effects on Post-Quench Microstructure and Mechanical Properties of Zircaloy-4 and M5 ® Alloys in LOCA Conditions , 2008 .

[17]  B. Cockeram,et al.  The influence of fast neutron irradiation and irradiation temperature on the tensile properties of wrought LCAC and TZM molybdenum , 2005 .

[18]  Kevin R Robb,et al.  Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions , 2014 .

[19]  Metall , 1897 .

[20]  Kurt A. Terrani,et al.  The effect of fuel thermal conductivity on the behavior of LWR cores during loss-of-coolant accidents , 2014 .

[21]  K. Terrani,et al.  Silicon carbide composite for light water reactor fuel assembly applications , 2014 .

[22]  Martin Steinbrück,et al.  Synopsis and outcome of the QUENCH experimental program , 2010 .