Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method

[1]  Marcin Białas,et al.  Finite element analysis of stress distribution in thermal barrier coatings , 2008 .

[2]  P. Fino,et al.  Modelling of TBC system failure: Stress distribution as a function of TGO thickness and thermal expansion mismatch , 2006 .

[3]  L. Singheiser,et al.  Finite element simulation of stress evolution in thermal barrier coating systems , 2006 .

[4]  D. Munz,et al.  Assessment of TBC systems failure mechanisms using a fracture mechanics approach , 2005 .

[5]  A. M. Limarga,et al.  Mechanical properties and oxidation resistance of plasma-sprayed multilayered Al2O3/ZrO2 thermal barrier coatings , 2005 .

[6]  M. Bäker,et al.  A parametric study of the stress state of thermal barrier coatings Part II: cooling stresses , 2005 .

[7]  M. Bäker,et al.  A parametric study of the stress state of thermal barrier coatings: Part I: creep relaxation , 2004 .

[8]  G. Antou.  Améliorations de revêtements barrières thermiques par un procédé de refusion laser in situ utilisant un laser à diodes , 2004 .

[9]  A. M. Limarga,et al.  Modeling of residual stresses in a plasma-sprayed zirconia/alumina functionally graded-thermal barrier coating , 2003 .

[10]  P. Wright,et al.  Evolution of a diffusion aluminide bond coat for thermal barrier coatings during thermal cycling , 2003 .

[11]  A. M. Limarga,et al.  Oxidation behavior of a plasma-sprayed functionally graded ZrO2/Al2O3 thermal barrier coating , 2002 .

[12]  D. Stöver,et al.  Stress distributions in plasma-sprayed thermal barrier coatings as a function of interface roughness and oxide scale thickness , 2002 .

[13]  D. Munz,et al.  Numerical investigation of residual stress fields and crack behavior in TBC systems , 2002 .

[14]  E. Jordan,et al.  Thermal Barrier Coatings for Gas-Turbine Engine Applications , 2002, Science.

[15]  Robert Vaßen,et al.  Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings , 2001 .

[16]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .

[17]  A. G. Evans,et al.  Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings , 2000 .

[18]  E. Fuller,et al.  Residual stresses in thermal barrier coatings: effects of interface asperity curvature:height and oxide thickness , 2000 .

[19]  C. Leyens,et al.  Influence of electron beam physical vapor deposited thermal barrier coating microstructure on thermal barrier coating system performance under cyclic oxidation conditions , 1999 .

[20]  Christer Persson,et al.  Modelled and measured residual stresses in plasma sprayed thermal barrier coatings , 1997 .