Processing maps: A status report

In the last two decades, processing maps have been developed on a wide variety of materials including metals and alloys, metal matrix composites, and aluminides, and applied to optimizing hot workability of materials and for process design in bulk metal working. Processing maps consist of a superimposition of efficiency of power dissipation and the instability maps, the former revealing the “safe” domain for processing and the latter setting the limits for avoiding undesirable microstructures. The dynamic materials model, which forms the basis for processing maps, is discussed in relation to other materials models. The application of dynamical systems principles to understanding of deterministic chaos in the system will help in achieving a greater degree of microstructural control during processing. The patterns in the hot working behavior as revealed by the processing maps of several classes of alloys relevant to technology are reviewed briefly. Processing maps have also been applied to analyze several industrial problems including process optimization, product property control, and defect avoidance, and a few examples are listed. With the processing maps reaching a matured stage as an effective tool for optimizing materials workability, expert systems and artificial neural network models are being developed to aid and prompt novice engineers to design and optimize metal processing without the immediate availability of a domain expert, and the directions of research in this area are outlined.

[1]  Y. Prasad,et al.  Processing maps for hot working of a P/M iron aluminide alloy , 2000 .

[2]  S. N. Narayana Murty,et al.  Instability criteria for hot deformation of materials , 2000 .

[3]  J. Yorke,et al.  Chaos, Strange Attractors, and Fractal Basin Boundaries in Nonlinear Dynamics , 1987, Science.

[4]  I. Prigogine.  Time, Structure, and Fluctuations , 1978, Science.

[5]  W. G. Frazier,et al.  Strain-induced porosity during cogging of extra-low interstitial grade Ti-6Al-4V , 2001 .

[6]  John J. Jonas,et al.  Strength and structure under hot-working conditions , 1969 .

[7]  F. B. J. Macmillen.  Nonlinear flight dynamics analysis , 1998, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[8]  W. Prager.  On Ideal Locking Materials , 1957 .

[9]  R. Ravi,et al.  Development of expert systems for the design of a hot-forging process based on material workability , 2003 .

[10]  J. Jonas,et al.  Formability and workability of metals : plastic instability and flow localization , 1984 .

[11]  Yellapregeda Prasad V.R.K.,et al.  Hot Working Guide: A Compendium of Processing Maps , 1997 .

[12]  Narendra Kumar.  Deterministic chaos: complex chance out of simple necessity , 1996 .

[13]  V. V. Kutumarao,et al.  Recent developments in modeling the hot working behavior of metallic materials , 1996 .

[14]  T. Charlton.  Progress in Solid Mechanics , 1962, Nature.

[15]  Y. Prasad,et al.  Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy , 2000 .

[16]  Robert C. Hilborn,et al.  Chaos And Nonlinear Dynamics: An Introduction for Scientists and Engineers , 1994 .

[17]  K. Muraleedharan,et al.  High-temperature deformation processing of Ti-24Al-20Nb , 1996 .