Assessment of the biocompatibility of three-dimensional-printed polymers using multispecies toxicity tests.

Additive manufacturing was adopted in multiple fields of life sciences. It is also becoming a popular tool for rapid prototyping of microfluidic and biomedical devices. Limited studies have been performed to investigate the biological implications of using 3D printed polymers. Here we assessed the biocompatibility of seven commercially available polymers, using a battery of standardized bioassays for chemical risk assessment. Our data show that leachates from photopolymers substrata appear to be very toxic to vertebrates and several invertebrate indicator organisms. These results demonstrate significant consequences for the use of selected photopolymers in the fabrication of bio-devices.

[1]  Dayanthi Nugegoda,et al.  Automated Lab-on-a-Chip Technology for Fish Embryo Toxicity Tests Performed under Continuous Microperfusion (μFET). , 2015, Environmental science & technology.

[2]  Donald Wlodkowic,et al.  Three-dimensional printed millifluidic devices for zebrafish embryo tests. , 2015, Biomicrofluidics.

[3]  T. Braunbeck,et al.  Is the fish embryo toxicity test (FET) with the zebrafish (Danio rerio) a potential alternative for the fish acute toxicity test? , 2009, Comparative biochemistry and physiology. Toxicology & pharmacology : CBP.

[4]  Noah Malmstadt,et al.  Predicting the behavior of microfluidic circuits made from discrete elements , 2015, Scientific Reports.

[5]  Albert Folch,et al.  3D-printed microfluidic automation. , 2015, Lab on a chip.

[6]  Albert Folch,et al.  Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices. , 2014, Lab on a chip.

[7]  G. Jung,et al.  3D-Printed Microfluidic Device for the Detection of Pathogenic Bacteria Using Size-based Separation in Helical Channel with Trapezoid Cross-Section , 2015, Scientific Reports.

[8]  G. Persoone,et al.  The use of Daphnia magna neonates hatched from ephippia for toxicity testing , 2000 .

[9]  Chee Meng Benjamin Ho,et al.  3D printed microfluidics for biological applications. , 2015, Lab on a chip.

[10]  Bethany C Gross,et al.  3D printed microfluidic devices with integrated versatile and reusable electrodes. , 2014, Lab on a chip.

[11]  A. Woolley,et al.  3D printed microfluidic devices with integrated valves. , 2015, Biomicrofluidics.

[12]  John Gray,et al.  Water contamination emergencies: enhancing our response. , 2006 .

[13]  Bastian E. Rapp,et al.  Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes , 2011 .

[14]  C. Janssen,et al.  Ecotoxicological Studies with the Freshwater Rotifer Brachionus calyciflorus: IV. Rotifer Behavior as a Sensitive and Rapid Sublethal Test Criterion , 1994 .

[15]  Seok Jae Lee,et al.  3D printed modules for integrated microfluidic devices , 2014 .

[16]  Aliaa I. Shallan,et al.  Cost-effective three-dimensional printing of visibly transparent microchips within minutes. , 2014, Analytical chemistry.