Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam

[1]  G. Alfano.  On the influence of the shape of the interface law on the application of cohesive-zone models , 2006 .

[2]  Zhishen Wu,et al.  Numerical Analysis of Debonding Mechanisms in FRP‐Strengthened RC Beams , 2005 .

[3]  Tamon Ueda,et al.  Development of the Nonlinear Bond Stress-Slip Model of Fiber Reinforced Plastics Sheet-Concrete Interfaces with a Simple Method , 2005 .

[4]  Zhishen Wu,et al.  Full-range behavior of FRP-to-concrete bonded joints , 2004 .

[5]  P. Qiao,et al.  Interface crack between two shear deformable elastic layers , 2004 .

[6]  Scott T Smith,et al.  Intermediate crack-induced debonding in RC beams and slabs , 2003 .

[7]  Zhishen Wu,et al.  Fracturing behaviors of FRP-strengthened concrete structures , 2003 .

[8]  N. Chandra,et al.  Some issues in the application of cohesive zone models for metal–ceramic interfaces , 2002 .

[9]  Zhishen Wu,et al.  Stress Transfer and Fracture Propagation in Different Kinds of Adhesive Joints , 2002 .

[10]  Yeoshua Frostig,et al.  Delamination Failure of RC Beams Strengthened with FRP Strips—A Closed-Form High-Order and Fracture Mechanics Approach , 2001 .

[11]  Ai-Min Yan,et al.  A finite-element model of mixed-mode delamination in laminated composites with an R-curve effect , 2001 .

[12]  Scott T. Smith,et al.  Interfacial stresses in plated beams , 2001 .

[13]  Wendel Michael Sebastian,et al.  SIGNIFICANCE OF MIDSPAN DEBONDING FAILURE IN FRP-PLATED CONCRETE BEAMS , 2001 .

[14]  Kasumassa Nakaba,et al.  BOND BEHAVIOR BETWEEN FIBER-REINFORCED POLYMER LAMINATES AND CONCRETE , 2001 .

[15]  Zhishen Wu,et al.  Theoretical solutions on interfacial stress transfer of externally bonded steel/composite laminates. , 2001 .

[16]  C. Leung.  Delamination Failure in Concrete Beams Retrofitted with a Bonded Plate , 2001 .

[17]  Kin-tak Lau,et al.  Estimation of stress intensity factor (KI) for an FRP bonded concrete beam using the superposition method , 2001 .

[18]  Kenneth M. Liechti,et al.  COHESIVE ZONE MODELING OF CRACK NUCLEATION AT BIMATERIAL CORNERS , 2000 .

[19]  Sunil Saigal,et al.  COHESIVE ELEMENT MODELING OF VISCOELASTIC FRACTURE: APPLICATION TO PEEL TESTING OF POLYMERS , 2000 .

[20]  K. Neale,et al.  Transfer Lengths and Bond Strengths for Composites Bonded to Concrete , 1999 .

[21]  U. Neubauer,et al.  Bond Failure of Concrete Fiber Reinforced Polymer Plates at Inclined Cracks—Experiments and Fracture Mechanics Model , 1999, SP-188: 4th Intl Symposium - Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures.

[22]  Hamid Saadatmanesh,et al.  Prediction Of Failure Load Of R/C Beams Strengthened With FRP Plate Due To Stress Concentration At T , 1998 .

[23]  Björn Täljsten,et al.  Defining anchor lengths of steel and CFRP plates bonded to concrete , 1997 .

[24]  Björn Täljsten,et al.  Strengthening of concrete prisms using the plate-bonding technique , 1996 .

[25]  Michael J. Chajes,et al.  Bond and Force Transfer of Composite-Material Plates Bonded to Concrete , 1996 .

[26]  Luc Taerwe,et al.  NON-METALLIC (FRP) REINFORCEMENT FOR CONCRETE STRUCTURES , 1995 .

[27]  D. Mertz,et al.  Shear Strengthening of Reinforced Concrete Beams Using Externally Applied Composite Fabrics , 1995 .

[28]  Thanasis Triantafillou,et al.  Strengthening of RC beams with epoxy-bonded fibre-composite materials , 1992 .

[29]  Thanasis Triantafillou,et al.  Post-Strengthening of R/C Beams With Epoxy-Bonded Fiber Composite Materials , 1991 .

[30]  T. M. Roberts,et al.  DISCUSSION. THEORETICAL STUDY OF THE BEHAVIOUR OF REINFORCED CONCRETE BEAMS STRENGTHENED BY EXTERNALLY BONDED STEEL PLATES. , 1989 .

[31]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[32]  I. Assaf.  Shear strengthening of reinforced concrete beams using an external carbon fibre Reinforced Polymer(CFRP) Composites of Low Elastic Modulus , 2007 .

[33]  J. Yaoa,et al.  Experimental study on FRP-to-concrete bonded joints , 2004 .

[34]  J. G. Williams,et al.  The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints , 2003 .

[35]  H. Rasheed,et al.  Bond Slip Analysis of Fiber-Reinforced Polymer-Strengthened Beams , 2002 .

[36]  Anthony G. Evans,et al.  MECHANICS OF MATERIALS: TOP-DOWN APPROACHES TO FRACTURE , 2000 .

[37]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[38]  T. Chondros,et al.  Analytical Methods in Rotor Dynamics , 1983 .

[39]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .