A new laser texturing technique for high performance magnetic disk drives

A novel approach to texturing a landing zone at the inner diameter of a magnetic disk is presented. The technique employs a high repetition rate short-pulsed laser to create discrete topographical features with rounded, dome-like protrusions ("bumps"). These bumps serve as smooth support points for the contacting slider. The laser texture technique provides precision in the landing zone placement while eliminating the transition zone of a mechanically textured landing zone. It also provides excellent tribological performance in terms of low contact start/stop stiction and good durability.

[1]  Costas P. Grigoropoulos,et al.  Near‐threshold laser sputtering of gold , 1995 .

[2]  V. Konov,et al.  Suppression of thermocapillary waves in laser melting of metals and semiconductors , 1994 .

[3]  K. Lu,et al.  COMPARISON OF PROPERTIES OF NANOCRYSTALLINE AND AMORPHOUS NI-P ALLOYS , 1992 .

[4]  P. Goglia,et al.  Laser texturing for low‐flying‐height media , 1991 .

[5]  K. Yanagi,et al.  Influence of surface texture of a thin-film rigid disk on frictional properties at the head-disk interface , 1990, International Conference on Magnetics.

[6]  A. Szász,et al.  Chemical mechanisms in electroless deposition. A study on the role of hydrogen in layer formation , 1988 .

[7]  S. McKnight,et al.  Infrared optical properties of amorphous nickel-phosphorus alloys , 1984 .

[8]  Jeff F. Young,et al.  Laser-induced periodic surface structure. II. Experiments on Ge, Si, Al, and brass , 1983 .

[9]  Philippe M. Fauchet,et al.  Growth of spontaneous periodic surface structures on solids during laser illumination , 1982 .

[10]  Y. Waseda,et al.  The Structure of Molten Nickel-Phosphorus Alloys , 1977 .

[11]  N. Isenor.  CO2 laser‐produced ripple patterns on NixP1−x surfaces , 1977 .

[12]  J. Celis,et al.  On the Amorphous and Crystalline State of Electrodeposited Nickel‐Phosphorus Coatings , 1994 .

[13]  P. Nair,et al.  Effect of phosphorus content on the relative proportions of crystalline and amorphous phases in electroless NiP deposits , 1994 .

[14]  G. Herziger,et al.  Fundamentals of Laser Micromachining of Metals , 1984 .

[15]  C. Shipley.  Historical highlights of electroless plating , 1984 .