Hermetic packaging of Kovar alloy and low-carbon steel structure in hybrid integrated circuit (HIC) system using parallel seam welding process

This work aims to characterize the microstructure and temperature field of the hermetic packaging structure by welding the cover made of Kovar alloy and the base made of a low-carbon low-alloy steel (i.e., #10 steel) using parallel seam welding (PSW) process. The microstructure of welded joints and distribution of elements were analyzed by scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS). Welding mechanism of PSW is discussed and temperature field of PSW is studied by a nonlinear transient finite element analysis. In FEM simulation, the surface contact pair is created to form weld beam and the heat generated by a pulse current is taken as a moving heat source. The results show that the maximum temperature in the weldment is 1105.3 °C, which is below the melting point of Kovar alloy and #10 steel (both in 1400~1500°C). The cross-sectional microstructure analysis results of the welded joint show that welded junction is localized between the plating layers of two base materials, both Kovar alloy and #10 steel did not melt during the welding process. Numerical simulation value of the temperature at the plating coat layer on Kovar side is larger than that on #10 steel because of boundary conditions and thermal conductivity. Same phenomenon can be seen at the location 3 mm away from the weldment. The temperature on the node of Kovar with a distance of 5 mm from the weldment is 796 °C.

[1]  James J. Licari,et al.  Hybrid Microcircuit Technology Handbook: Materials, Processes, Design, Testing and Production , 1998 .

[2]  G. Qiao,et al.  Active brazing of pure alumina to Kovar alloy based on the partial transient liquid phase (PTLP) technique with Ni–Ti interlayer , 2002 .

[3]  A. C. Spowage,et al.  Characterisation of dissimilar joints in laser welding of steel–kovar, copper–steel and copper–aluminium , 2004 .

[4]  Peng Liu,et al.  Microstructure and performance in diffusion-welded joints of Fe3Al/Q235 carbon steel , 2004 .

[5]  Y. Chan,et al.  Characterization of Kovar-to-Kovar laser welded joints and its mechanical strength , 2005 .

[6]  Yican Wu,et al.  Microstructure and mechanical properties of the TIG welded joints of fusion CLAM steel , 2010 .

[7]  D. L. Chen,et al.  Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints , 2011 .

[8]  Xiaoyan Li,et al.  Study on microstructure and mechanical properties of Al–Mg–Mn–Er alloy joints welded by TIG and laser beam , 2012 .

[9]  F. Goodwin,et al.  Microstructure and fatigue properties of fiber laser welded dissimilar joints between high strength low alloy and dual-phase steels , 2013 .

[10]  S. H. Baghjari,et al.  Experimental investigation on dissimilar pulsed Nd:YAG laser welding of AISI 420 stainless steel to kovar alloy , 2014 .

[11]  C. Bolfarini,et al.  Microstructure and interface characterization of dissimilar friction stir welded lap joints between Ti–6Al–4V and AISI 304 , 2014 .