Wear resistance of ZrB2 based ceramic composites

[1]  Yiguang Wang,et al.  Mechanical properties of ZrB2–SiC ceramics prepared by polymeric precursor route , 2018 .

[2]  T. Murthy.  MICROSTRUCTURE, THERMO-PHYSICAL, MECHANICAL AND WEAR PROPERTIES OF IN-SITU FORMED BORON CARBIDE - ZIRCONIUM DIBORIDE COMPOSITE , 2017 .

[3]  J. Sakamoto,et al.  Mechanical properties of individual phases of ZrB2-ZrC eutectic composite measured by nanoindentation , 2017 .

[4]  Mehdi Shahedi Asl,et al.  Optimization of effective parameters on thermal shock resistance of ZrB2-SiC-based composites prepared by SPS: Using Taguchi design , 2017 .

[5]  G. Hilmas,et al.  Processing, Microstructure, and Mechanical Properties of Zirconium Diboride-Boron Carbide Ceramics , 2017 .

[6]  G. Hilmas,et al.  Ultra-high temperature ceramics: Materials for extreme environments , 2017 .

[7]  A. Domínguez-Rodríguez,et al.  Abrasive wear rate of boron carbide ceramics: Influence of microstructural and mechanical aspects on their tribological response , 2016 .

[8]  R. He,et al.  High temperature flexural strength and oxidation behavior of hot-pressed B4C–ZrB2 ceramics with various ZrB2 contents at 1000–1600 °C in air , 2016 .

[9]  G. Hilmas,et al.  Ultra‐High Temperature Mechanical Properties of a Zirconium Diboride–Zirconium Carbide Ceramic , 2016 .

[10]  S. Chakraborty,et al.  Spark plasma sintering and structural properties of ZrB2 based ceramics: a review , 2016 .

[11]  S. Chakraborty,et al.  Microscopic, mechanical and thermal properties of spark plasma sintered ZrB2 based composite containing polycarbosilane derived SiC , 2015 .

[12]  Guo‐Jun Zhang,et al.  Changed oxidation behavior of ZrB2–SiC ceramics with the addition of ZrC , 2015 .

[13]  S. Chakraborty,et al.  Mechanical, Tribological, and Thermal Properties of Hot-Pressed ZrB2-B4C Composite , 2015 .

[14]  G. Hilmas,et al.  Mechanical behavior of zirconium diboride–silicon carbide–boron carbide ceramics up to 2200 °C , 2015 .

[15]  S. Chakraborty,et al.  Mechanical, tribological and thermal properties of hot pressed ZrB2–SiC composite with SiC of different morphology , 2015 .

[16]  Mehdi Shahedi Asl,et al.  A fractographical approach to the sintering process in porous ZrB2–B4C binary composites , 2015 .

[17]  S. Chakraborty,et al.  Densification, mechanical and tribological properties of ZrB2 by SPS: Effect of pulsed current , 2015 .

[18]  V. Medri,et al.  Sintering and Densification Mechanisms of Ultra‐High Temperature Ceramics , 2014 .

[19]  William G. Fahrenholtz,et al.  Ultra-high temperature ceramics : materials for extreme environment applications , 2014 .

[20]  G. Hilmas,et al.  Mechanical behavior of zirconium diboride–silicon carbide ceramics at elevated temperature in air , 2013 .

[21]  S. Guo,et al.  Densification of ZrB2-based composites and their mechanical and physical properties: A review , 2009 .

[22]  William G. Fahrenholtz,et al.  Pressureless Sintering of Zirconium Diboride Using Boron Carbide and Carbon Additions , 2007 .

[23]  William G. Fahrenholtz,et al.  Thermodynamic Analysis of ZrB2–SiC Oxidation: Formation of a SiC‐Depleted Region , 2007 .

[24]  G. Hilmas,et al.  Evolution of structure during the oxidation of zirconium diboride–silicon carbide in air up to 1500 °C , 2007 .

[25]  G. Hilmas,et al.  Pressureless Densification of Zirconium Diboride with Boron Carbide Additions , 2006 .

[26]  A. Bellosi,et al.  Advances in microstructure and mechanical properties of zirconium diboride based ceramics , 2003 .

[27]  Mark M. Opeka,et al.  Mechanical, Thermal, and Oxidation Properties of Refractory Hafnium and zirconium Compounds , 1999 .

[28]  Kazunori Umeda,et al.  Friction and wear of boride ceramics in air and water , 1993 .

[29]  D. Hasselman,et al.  Evaluation ofKIc of brittle solids by the indentation method with low crack-to-indent ratios , 1982 .