Shaped comb fingers for tailored electromechanical restoring force

Electrostatic comb drives are widely used in microelectromechanical devices. These comb drives often employ rectangular fingers which produce a stable, constant force output as they engage. This paper explores the use of shapes other than the common rectangular fingers. Such shaped comb fingers allow customized force-displacement response for a variety of applications. In order to simplify analysis and design of shaped fingers, a simple model is developed to predict the force generated by shaped comb fingers. This model is tested using numerical simulation on several different sample shaped comb designs. Finally, the model is further tested, and the use of shaped comb fingers is demonstrated, through the design, fabrication, and testing of tunable resonators which allow both up and down shifts of the resonant frequency. The simulation and testing results demonstrate the usefulness and accuracy of the simple model. Finally, other applications for shaped comb fingers are described, including tunable sensors, low-voltage actuators, multistable actuators, or actuators with linear voltage-displacement behavior.

[1]  Albert P. Pisano,et al.  Polysilicon microgripper , 1990, IEEE 4th Technical Digest on Solid-State Sensor and Actuator Workshop.

[2]  Kun Wang,et al.  High-order medium frequency micromechanical electronic filters , 1999 .

[3]  Liwei Lin,et al.  Active frequency tuning for micro resonators by localized thermal stressing effects , 2001 .

[4]  Chong-Won Lee,et al.  Capacitive type surface-micromachined silicon accelerometer with stiffness tuning capability , 1999 .

[5]  Noel C. MacDonald,et al.  A micromachined, single-crystal silicon, tunable resonator , 1995 .

[6]  Young-Ho Cho,et al.  Frequency tuning of a laterally driven microresonator using an electrostatic comb array of linearly varied length , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[7]  Richard R. A. Syms,et al.  Electrothermal frequency tuning of folded and coupled vibrating micromechanical resonators , 1998 .

[8]  Roger T. Howe,et al.  Surface micromachined, digitally force-balanced accelerometer with integrated CMOS detection circuitry , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[9]  H. Barry Harrison,et al.  Improved operation of micromechanical comb-drive actuators through the use of a new angled comb-finger design , 1997, Smart Materials, Nano-, and Micro- Smart Systems.

[10]  J.J. Sniegowski,et al.  Surface-micromachined gear trains driven by an on-chip electrostatic microengine , 1996, IEEE Electron Device Letters.

[11]  Subrata Mukherjee,et al.  Design and Fabrication of an Electrostatic Variable Gap Comb Drive in Micro-Electro-Mechanical Systems , 2000 .

[12]  K. J. Gabriel,et al.  Design, fabrication, and operation of submicron gap comb-drive microactuators , 1992 .

[13]  Cam Nguyen,et al.  Frequency trimming and Q-factor enhancement of micromechanical resonators via localized filament annealing , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[14]  N. C. MacDonald,et al.  Capacitance Based Tunable Micromechanical Resonators , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[15]  Chong-Won Lee,et al.  Laterally oscillated and force-balanced micro vibratory rate gyroscope supported by fish-hook-shaped springs , 1998 .

[16]  N. C. MacDonald,et al.  Five parametric resonances in a microelectromechanical system , 1998, Nature.

[17]  Liwei Lin,et al.  Selective polysilicon deposition for frequency tuning of MEMS resonators , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[18]  L. Warne,et al.  Electrophysics of micromechanical comb actuators , 1995 .

[19]  N. C. MacDonald,et al.  Optimal shape design of an electrostatic comb drive in microelectromechanical systems , 1998 .

[20]  N. C. MacDonald,et al.  Fabrication of high frequency two-dimensional nanoactuators for scanned probe devices , 1992 .