Effect of ion irradiation on the surface, structural and mechanical properties of brass

[1]  S. Bashir,et al.  Effect of laser fluence on surface, structural and mechanical properties of Zr after irradiation in the ambient environment of oxygen , 2013 .

[2]  S. Roberts,et al.  Effects of irradiation temperature and dose rate on the mechanical properties of self-ion implanted Fe and Fe–Cr alloys , 2013, 1311.3786.

[3]  V. S. Kovivchak,et al.  Features of the surface morphology of brass and bronze upon irradiation with a high power ion beam , 2013, Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques.

[4]  N. Ali,et al.  Effect of dry and wet ambient environment on the pulsed laser ablation of titanium , 2013 .

[5]  R. Ahmad,et al.  Mechanical behavior of low-dose neutron-irradiated polycrystalline zirconium , 2012 .

[6]  D. Mutharasu,et al.  An effect of N+ ion bombardment on the properties of CdTe thin films , 2012 .

[7]  L. Shao,et al.  Enhanced radiation tolerance of ultrafine grained Fe–Cr–Ni alloy , 2012 .

[8]  N. Saxena,et al.  Study on thermal and mechanical properties of cis- and trans-polyisoprene blends implanted by carbon ions , 2011 .

[9]  T. Ohkubo,et al.  Effects of solute elements on irradiation hardening and microstructural evolution in low alloy steels , 2011 .

[10]  V. Popok.  Energetic cluster ion beams: Modification of surfaces and shallow layers , 2011 .

[11]  Baljeet Singh,et al.  Effect of fast neutron irradiation on tensile properties of AISI 304 stainless steel and alloy Ti–6Al–4V , 2011 .

[12]  A. Davoodi,et al.  Microstructural and mechanical properties of friction stir welded Cu–30Zn brass alloy at various feed speeds: Influence of stir bands , 2011 .

[13]  G. Chen,et al.  Effect of Ar+ ion irradiation on the microstructure and properties of Zr–Cu–Fe–Al bulk metallic glass , 2011 .

[14]  G. Agarwal,et al.  Ion beam induced surface and interface engineering , 2011 .

[15]  J. I. Akhter,et al.  Surface modification of Zr-based bulk amorphous alloys by using ion irradiation , 2011 .

[16]  S. De,et al.  A temperature and rate-dependent micromechanical model of molybdenum under neutron irradiation , 2011 .

[17]  F. E. Mubarik,et al.  Mechanical response of proton beam irradiated nitinol , 2011 .

[18]  N. Kishimoto,et al.  Void formation in silica glass induced by thermal oxidation after Zn+ ion implantation , 2008 .

[19]  T. Byun,et al.  Dose dependence of mechanical properties in tantalum and tantalum alloys after low temperature irradiation , 2008 .

[20]  R. Lebensohn,et al.  Modeling and simulation of irradiation hardening in structural ferritic steels for advanced nuclear reactors , 2008 .

[21]  I. M. Ghauri,et al.  Rate controlling process of stress relaxation in high purity irradiated titanium , 2006 .

[22]  S. Prawer,et al.  Crack-arresting compression layers produced by ion implantation , 2006 .

[23]  A. El-Amoush,et al.  The effect of hydrogen charging on the mechanical behaviour of α-brass , 2005 .

[24]  V. P. Borisov,et al.  Study of the effect of infrared laser radiation on a steel surface , 2003 .

[25]  H. Man,et al.  Laser surfacing of brass with Ni–Cr–Al–Mo–Fe using various laser processing parameters , 2002 .

[26]  H. Man,et al.  Enhancement of cavitation erosion and corrosion resistance of brass by laser surface alloying with Ni–Cr–Si–B , 2002 .

[27]  S. Banerjee,et al.  The study of microstructural defects and mechanical properties in proton-irradiated Zr–1.0%Nb–1.0%Sn–0.1%Fe , 2001 .

[28]  B. N. Singh,et al.  Effects of neutron irradiation on mechanical properties and microstructures of dispersion and precipitation hardened copper alloys , 1996 .

[29]  H. Ullmaier,et al.  Effects of light-ion irradiation on mechanical properties of metals and alloys , 1990 .