Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualification

The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a suc ...

J. Karhunen | Ž. Gosar | P. Pelicon | P. Vavpetič | R. Neu | J. Bauer | D. Falie | H. Koslowski | G. Ciraolo | T. Eich | N. Fedorczak | J. Bucalossi | S. Brezinsek | M. Groth | B. Pégourié | Y. Corre | E. Tsitrone | G. Popa | M. Mozetič | D. Tskhakaya | J. Linke | K. Nordlund | T. Ahlgren | M. Balden | L. Ciupinski | H. Greuner | K. Heinola | T. Höschen | C. Linsmeier | H. Maier | G. Pintsuk | Johann Riesch | M. Rosinski | P. Petersson | J. Coenen | P. Gąsior | A. Sima | A. Kaiser | M. Probst | S. Möller | M. Rasinski | E. Alves | R. Zaplotnik | I. Jõgi | M. Laan | D. Borodin | V. Lazic | F. Colao | C. Martin | T. Tadić | M. B. Yaala | M. Airila | T. Dittmar | S. Elgeti | T. Fornal | M. Gruca | M. Kubkowska | B. Unterberg | F. Aumayr | J. Räisänen | J. Gunn | F. Tabares | D. Tafalla | W. Jacob | A. Litnovsky | K. Hassouni | J. Likonen | T. Morgan | U. Toussaint | T. Schwarz-Selinger | K. Schmid | C. Björkas | A. Lasa | L. Caneve | L. Marot | Z. Siketić | A. Weckmann | A. Kirschner | A. Hakola | A. Kreter | P. Veis | S. Markelj | D. Dellasega | R. Caniello | F. Ghezzi | M. Passoni | D. Reiser | T. Craciunescu | I. Tiseanu | G. Sergienko | D. Ricci | A. Cremona | A. Uccello | M. D. Angeli | P. Paris | G. Maddaluno | Y. Marandet | N. Mellet | J. Miettunen | L. Laguardia | C. Ruset | M. Aints | M. Mayer | C. Pardanaud | C. Grisolia | J. Butikova | T. Angot | R. Bisson | M. Panjan | C. Costin | A. Michau | I. Radović | M. Čekada | A. Terra | E. Grigore | M. Wirtz | B. Spilker | N. Catarino | M. Richou | A. Zaloznik | J. Vernimmen | T. Loewenhoff | S. Ratynskaia | P. Tolias | G. Riva | C. Lungu | M. Rubel | D. Terentyev | A. Lahtinen | R. Dejarnac | E. Oyarzabal | H. V. D. Meiden | M. Mayoral | M. Reinhart | S. Almaviva | V. Anita | R. A. Parra | B. M. Berger | B. Butoi | I. Čadež | G. Cartry | A. D. Castro | P. Dinca | C. Dobrea | P. Hansen | A. Drenik | Y. Ferro | E. Fortuna-Zalesna | L. Gao | M. Gherendi | J. Grzonka | S. E. Huber | I. Jepu | X. Jiang | M. Kelemen | M. Köppen | N. Lemahieu | M. Lungu | T. Makkonen | A. Manhard | A. B. Mart́ın-Rojo | Y. Martynova | R. Mateus | D. Matveev | G. Meisl | J. Mougenot | V. Nemanic | M. Oberkofler | K. Piip | G. Pompilian | C. Porosnicu | G. Primc | P. Roubin | E. Safi | R. Stadlmayr | I. Steudel | P. Ström | I. Tale | V. Tiron | I. Uytdenhoven | E. Vassallo | Ioana-Laura Velicu | A. Voitkans | Wp Pfc Contributors | S. Huber | A. Založnik | F. Tabarés | Wp Pfc contributors | M. Rosiński

[1]  Johannes Roth,et al.  Key issues in plasma-wall interactions for ITER: a European approach , 2003 .

[2]  R. Duwe,et al.  The new electron beam test facility JUDITH II for high heat flux experiments on plasma facing components , 2005 .

[3]  D. Whyte,et al.  Extreme hydrogen plasma densities achieved in a linear plasma generator , 2007 .

[4]  H. Greuner,et al.  High heat flux facility GLADIS:: Operational characteristics and results of W7-X pre-series target tests , 2007 .

[5]  S. Brezinsek,et al.  In situ measurements of fuel retention by laser induced desorption spectroscopy in TEXTOR , 2011 .

[6]  J. Schweinzer,et al.  Impurity seeding for tokamak power exhaust: from present devices via ITER to DEMO , 2013 .

[7]  Huijun Li,et al.  Recent progress in research on tungsten materials for nuclear fusion applications in Europe , 2013 .

[8]  M. Groth,et al.  1D kinetic modelling of the JET SOL with tungsten divertor plates , 2013, Journal of nuclear materials. Journal des materiaux nucleaires.

[9]  W. Fundamenski,et al.  Quasineutral plasma expansion into infinite vacuum as a model for parallel ELM transport , 2013 .

[10]  Eliseo Visca,et al.  Potential and limits of water cooled divertor concepts based on monoblock design as possible candidates for a DEMO reactor , 2013 .

[11]  R. Felton,et al.  Fuel retention studies with the ITER-Like Wall in JET , 2013 .

[12]  T. Höschen,et al.  Interaction of nitrogen ions with beryllium surfaces , 2014 .

[13]  S. Brezinsek,et al.  Plasma-surface interaction in the Be/W environment: Conclusions drawn from the JET-ILW for ITER , 2015 .

[14]  K. Nordlund,et al.  Multiscale modelling of plasma–wall interactions in fusion reactor conditions , 2014 .

[15]  C. Gil,et al.  The WEST project: Testing ITER divertor high heat flux component technology in a steady state tokamak environment , 2014 .

[16]  J. Roth,et al.  EUROFER as wall material: reduced sputtering yields due to W surface enrichment , 2014 .

[17]  R. Doerner,et al.  Temperature influence on deuterium retention for Be–W mixed thin films prepared by Thermionic Vacuum Arc method exposed to PISCES B plasma , 2015 .

[18]  S. Brezinsek,et al.  Modelling of the material transport and layer formation in the divertor of JET: comparison of ITER-like wall with full carbon wall conditions , 2015 .

[19]  J. Linke,et al.  Impact of combined hydrogen plasma and transient heat loads on the performance of tungsten as plasma facing material , 2015 .

[20]  J. Roth,et al.  Erosion study of Fe–W binary mixed layer prepared as model system for RAFM steel , 2015 .

[21]  J. Contributors,et al.  Quantitative modeling of fuel retention in the JET-C and JET-ILW wall configurations by WallDYN and predictions for ITER , 2015 .

[22]  F. Tabares,et al.  Ammonia formation in N 2 /H 2 plasmas on ITER-relevant plasma facing materials: Surface temperature and N 2 plasma content effects , 2015 .

[23]  J. Karhunen,et al.  LIBS analysis of tungsten coatings exposed to Magnum PSI ELM-like plasma , 2015 .

[24]  F. Tabares,et al.  Laboratory experiments of uptake and release of hydrogen isotopes in liquid lithium , 2015 .

[25]  T. Muroga,et al.  Super-saturated hydrogen effects on radiation damages in tungsten under the high-flux divertor plasma irradiation , 2015 .

[26]  J. Contributors,et al.  High density operation for reactor-relevant power exhaust , 2015 .

[27]  A. Litnovsky,et al.  Dust remobilization in fusion plasmas under steady state conditions , 2015, 1508.06156.

[28]  S. Möller,et al.  Linear Plasma Device PSI-2 for Plasma-Material Interaction Studies , 2015 .

[29]  J. Plavcan,et al.  Use of the near vacuum UV spectral range for the analysis of W-based materials for fusion applications using LIBS , 2016 .

[30]  Klaus Schmid.  Diffusion-trapping modelling of hydrogen recycling in tungsten under ELM-like heat loads , 2016 .

[31]  S. Brezinsek,et al.  Ion beam analysis of tungsten layers in EUROFER model systems and carbon plasma facing components , 2016 .

[32]  M. Mozetič,et al.  Erosion of a-C:H in the afterglow of ammonia plasma , 2016 .

[33]  I. Burducea,et al.  Beryllium-tungsten study on mixed layers obtained by m-HiPIMS/DCMS techniques in a deuterium and nitrogen reactive gas mixture , 2017 .