Packaging of phosphor-converted white light-emitting diodes for solid-state lighting

For both high conversion efficiency and thermal stability, glass-based phosphor-converted white light-emitting diodes (GBPC-WLEDs) were packaged for optic characterization study. Fabricated by flip chip, glass based PC-WLEDs were found Tj dramatically decreased, and emission intensity eminently raised up. If driven by large electric current, such samples would have even lower Tj 36°C. These characteristics will significantly improve thermal stability and lifetime of the LED packaging modules. In addition to high optical quality and low manufacture cost, such better thermal stability of glass phosphor layer may be beneficial for public policy of mass replacement of street lights with solid-state lighting LED as one of many applications requiring high-power and high reliability.

[1]  Jong Kyu Kim,et al.  Transcending the replacement paradigm of solid-state lighting. , 2008, Optics express.

[2]  M. Pashley,et al.  Red, green, and blue LEDs for white light illumination , 2002 .

[3]  Hoi Sing Kwok,et al.  JOURNAL OF DISPLAY TECHNOLOGY EDITOR-IN-CHIEF , 2009 .

[4]  A. Sakamoto,et al.  Luminescence Characteristics of YAG Glass–Ceramic Phosphor for White LED , 2008, IEEE Journal of Selected Topics in Quantum Electronics.

[5]  Mamoru Mitomo,et al.  2-phosphor-converted white light-emitting diodes using oxynitride/nitride phosphors , 2007 .

[6]  M. Craford,et al.  Status and Future of High-Power Light-Emitting Diodes for Solid-State Lighting , 2007, Journal of Display Technology.

[7]  T. P. Gloria,et al.  Environmental science and technology , 2006 .

[8]  Yik-Khoon Ee,et al.  Light extraction efficiency enhancement of InGaN quantum wells light-emitting diodes with polydimethylsiloxane concave microstructures. , 2009, Optics express.

[9]  Wood-Hi Cheng,et al.  Ultra-High Thermal-Stable Glass Phosphor Layer for Phosphor-Converted White Light-Emitting Diodes , 2013, Journal of Display Technology.

[10]  Julie M Schoenung,et al.  Potential environmental impacts from the metals in incandescent, compact fluorescent lamp (CFL), and light-emitting diode (LED) bulbs. , 2013, Environmental science & technology.

[11]  Wood-Hi Cheng,et al.  Mean-time-to-failure evaluations of encapsulation materials for LED package in accelerated thermal tests , 2012, Microelectron. Reliab..

[12]  重治 小野木,et al.  Journal of Applied physics,Vol.33 : 1962年に発表されたレオロジー関連の論文 , 1963 .

[13]  James S. Speck,et al.  Directionality control through selective excitation of low-order guided modes in thin-film InGaN photonic crystal light-emitting diodes , 2011 .

[14]  S. Chang,et al.  A comparative study of blue, green and yellow light emitting diode structures grown by metal organic chemical vapor deposition , 2006 .

[15]  Paul S. Martin,et al.  Illumination with solid state lighting technology , 2002 .

[16]  H. J. Hagger,et al.  Solid State Electronics , 1960, Nature.

[17]  S.J. Chang,et al.  White-light emission from near UV InGaN-GaN LED chip precoated with blue/green/red phosphors , 2003, IEEE Photonics Technology Letters.

[18]  Hilmi Volkan Demir,et al.  Color-converting combinations of nanocrystal emitters for warm-white light generation with high color rendering index , 2008 .

[19]  J. W. Meredith,et al.  Microelectronics reliability , 1988, IEEE Region 5 Conference, 1988: 'Spanning the Peaks of Electrotechnology'.

[20]  Nelson Tansu,et al.  Approaches for high internal quantum efficiency green InGaN light-emitting diodes with large overlap quantum wells. , 2011, Optics express.

[21]  Nelson Tansu,et al.  Improvement in spontaneous emission rates for InGaN quantum wells on ternary InGaN substrate for light-emitting diodes , 2011 .

[22]  N. Tran,et al.  Light extraction enhanced white light-emitting diodes with multi-layered phosphor configuration. , 2010, Optics express.