Phase Change Materials and Products for Building Applications: A State-of-the-Art Review and Future Research Opportunities

This work has been supported by the Research Council of Norway and several partners through The Research Centre on Zero Emission Buildings (ZEB)

[1]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[2]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .

[3]  Som S Shrestha,et al.  MODELING PCM-ENHANCED INSULATION SYSTEM AND BENCHMARKING ENERGYPLUS AGAINST CONTROLLED FIELD DATA , 2011 .

[4]  Bjørn Petter Jelle,et al.  Transmission Spectra of an Electrochromic Window Based on Polyaniline, Prussian Blue and Tungsten Oxide , 1993 .

[5]  Arild Gustavsen,et al.  Gas-filled panels for building applications: A state-of-the-art review , 2010 .

[6]  Bjørn Petter Jelle,et al.  Vacuum insulation panel products: A state-of-the-art review and future research pathways , 2014 .

[7]  H. Paksoy,et al.  Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material , 2006 .

[8]  Arild Gustavsen,et al.  Solar material protection factor (SMPF) and solar skin protection factor (SSPF) for window panes and other glass structures in buildings , 2007 .

[9]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[10]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[11]  Valentina Serra,et al.  Improving thermal comfort conditions by means of PCM glazing systems , 2013 .

[12]  Zia Ud Din,et al.  Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .

[13]  Rasmus Lund Jensen,et al.  A new experimental method to determine specific heat capacity of inhomogeneous concrete material with incorporated microencapsulated-PCM , 2014 .

[14]  Bjørn Petter Jelle,et al.  Performance of an electrochromic window based on polyaniline, prussian blue and tungsten oxide , 1999 .

[15]  Esam M. Alawadhi,et al.  Using phase change materials in window shutter to reduce the solar heat gain , 2012 .

[16]  Bjørn Petter Jelle,et al.  The Path to the Building Integrated Photovoltaics of Tomorrow , 2012 .

[17]  Mark Voorneveld,et al.  Preparation , 2018, Games Econ. Behav..

[18]  Cemil Alkan,et al.  Enthalpy of melting and solidification of sulfonated paraffins as phase change materials for thermal energy storage , 2006 .

[19]  Manfred Baldauf,et al.  Latent heat storage , 2011 .

[20]  Seulgi Yu,et al.  Bio-based PCM/carbon nanomaterials composites with enhanced thermal conductivity , 2014 .

[21]  Bjørn Petter Jelle,et al.  The challenge of removing snow downfall on photovoltaic solar cell roofs in order to maximize solar energy efficiency—Research opportunities for the future , 2013 .

[22]  Bjørn Petter Jelle,et al.  State-of-the-art Building Integrated Photovoltaics , 2012 .

[23]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[24]  D. Feldman,et al.  Latent heat storage in concrete , 1989 .

[25]  Bjørn Petter Jelle,et al.  Accelerated climate ageing of building materials, components and structures in the laboratory , 2012, Journal of Materials Science.

[26]  Francesco Goia,et al.  Possibilities for characterization of a PCM window system using large scale measurements , 2013 .

[27]  Arild Gustavsen,et al.  Aerogel insulation for building applications: A state-of-the-art review , 2011 .

[28]  Per Heiselberg,et al.  Review of thermal energy storage technologies based on PCM application in buildings , 2013 .

[29]  A. Sari,et al.  Some fatty acids used for latent heat storage: thermal stability and corrosion of metals with respect to thermal cycling , 2003 .

[30]  Bjørn Petter Jelle,et al.  Traditional, state-of-the-art and future thermal building insulation materials and solutions Prope , 2011 .

[31]  Rachel Becker.  Improving thermal and energy performance of buildings in summer with internal phase change materials , 2014 .

[32]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[33]  Laurent Royon,et al.  Thermal energy storage and release of a new component with PCM for integration in floors for thermal management of buildings , 2013 .

[34]  Lv Shilei,et al.  Impact of phase change wall room on indoor thermal environment in winter , 2006 .

[35]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[36]  Zhonghao Rao,et al.  Molecular dynamics simulations of nano-encapsulated and nanoparticle-enhanced thermal energy storage phase change materials , 2013 .

[37]  Valentina Serra,et al.  Experimental analysis of the energy performance of a full-scale PCM glazing prototype , 2014 .

[38]  Na Zhu,et al.  Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .

[39]  Serge Bourbigot,et al.  Microencapsulation of ammonium phosphate with a polyurethane shell part I: Coacervation technique , 2005 .

[40]  C. Cho,et al.  Microencapsulation of octadecane as a phase-change material by interfacial polymerization in an emulsion system , 2002 .

[41]  Zhang Zhibin,et al.  Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea system , 2009 .

[42]  Joseph Virgone,et al.  In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard , 2011 .

[43]  S. D. Sharma,et al.  Accelerated thermal cycle test of acetamide, stearic acid and paraffin wax for solar thermal latent heat storage applications , 2002 .

[44]  Nitin Shukla,et al.  Cost Analysis of Simple Phase Change Material-Enhanced Building Envelopes in Southern U.S. Climates , 2013 .

[45]  L. Cabeza,et al.  PHASE CHANGE MATERIALS: APPLICATION FUNDAMENTALS , 2007 .

[46]  Parfait Tatsidjodoung,et al.  A review of potential materials for thermal energy storage in building applications , 2013 .

[47]  Esam M. Alawadhi,et al.  Concrete roof with cylindrical holes containing PCM to reduce the heat gain , 2013 .

[48]  Mahmoud Moeini Sedeh,et al.  Thermal conductivity improvement of phase change materials/graphite foam composites , 2013 .

[49]  Shazim Ali Memon,et al.  Phase change materials integrated in building walls: A state of the art review , 2014 .

[50]  Kamal Abdel Radi Ismail,et al.  Comparison between PCM filled glass windows and absorbing gas filled windows , 2008 .

[51]  H. Paksoy,et al.  Thermal Energy Storage for Sustainable Energy Consumption , 2007 .

[52]  Jinliang Song,et al.  Thermophysical properties of high-density graphite foams and their paraffin composites , 2012 .

[53]  Alberto Giretti,et al.  Radiant floors integrated with PCM for indoor temperature control , 2011 .

[54]  Chika Honda.  [Introduction to PCM technology]. , 2006, Nihon Hoshasen Gijutsu Gakkai zasshi.

[55]  Liwu Fan,et al.  Thermal conductivity enhancement of phase change materials for thermal energy storage: A review , 2011 .

[56]  Xu Xu,et al.  Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .

[57]  Lei Cao,et al.  Synthesis and characterization of microencapsulated paraffin with titanium dioxide shell as shape-stabilized thermal energy storage materials in buildings , 2014 .

[58]  Dan Song,et al.  Preparation and performances of bulk porous Al foams impregnated with phase-change-materials for thermal storage , 2012 .

[59]  William J. Fisk,et al.  Some Quantitative Relations between Indoor Environmental Quality and Work Performance or Health , 2006 .

[60]  E. Onder,et al.  Organic phase change materials and their textile applications: An overview , 2012 .

[61]  L. Cabeza,et al.  Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM) , 2013 .

[62]  M. K. Rathod,et al.  Thermal stability of phase change materials used in latent heat energy storage systems: A review , 2013 .

[63]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[64]  Fu Xiao,et al.  Peak load shifting control using different cold thermal energy storage facilities in commercial buildings: A review , 2013 .

[65]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[66]  Bjørn Petter Jelle,et al.  Building integrated photovoltaic products: A state-of-the-art review and future research opportunities , 2012 .

[67]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[68]  Edwin Rodriguez-Ubinas,et al.  Influence of the use of PCM drywall and the fenestration in building retrofitting , 2013 .

[69]  Arild Gustavsen,et al.  The path to the high performance thermal building insulation materials and solutions of tomorrow , 2010 .

[70]  Bjørn Petter Jelle,et al.  Transmission spectra of an electrochromic window consisting of polyaniline, prussian blue and tungsten oxide , 1993 .

[71]  T. Kousksou,et al.  Energy storage: Applications and challenges , 2014 .

[72]  Bjørn Petter Jelle,et al.  Solar radiation glazing factors for window panes, glass structures and electrochromic windows in buildings-Measurement and calculation , 2013 .

[73]  Jose M. Marin,et al.  Verification of a T-history installation to measure enthalpy versus temperature curves of phase change materials , 2006 .

[74]  Bjørn Petter Jelle,et al.  Reduction factor for polyaniline films on ito from cyclic voltammetry and visible absorption spectra , 1993 .

[75]  Bjørn Petter Jelle,et al.  Transmission properties for individual electrochromic layers in solid state devices based on polyaniline, Prussian Blue and tungsten oxide , 1998 .

[76]  Lv Shilei,et al.  Eutectic mixtures of capric acid and lauric acid applied in building wallboards for heat energy storage , 2006 .

[77]  Xing Jin,et al.  Thermal analysis of a double layer phase change material floor , 2011 .

[78]  Robert F. Boehm,et al.  Modeling of Phase Change Material Peak Load Shifting , 2007 .

[79]  Zhang Yinping,et al.  A simple method, the -history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials , 1999 .

[80]  Serge Bourbigot,et al.  Microencapsulation of ammonium phosphate with a polyurethane shell. Part II. Interfacial polymerization technique , 2006 .

[81]  Marc A. Rosen,et al.  Thermal performance of a multiple PCM thermal storage unit for free cooling , 2013 .

[82]  Harald Mehling,et al.  Development of standards for materials testing and quality control of PCM , 2006 .

[83]  Bogdan Diaconu,et al.  Thermal energy savings in buildings with PCM-enhanced envelope: Influence of occupancy pattern and v , 2011 .

[84]  A. Sari,et al.  Thermal properties and thermal reliability of eutectic mixtures of some fatty acids as latent heat storage materials , 2004 .

[85]  W. Tao,et al.  Fatty acids as phase change materials: A review , 2014 .

[86]  D. Buddhi,et al.  Thermal cycling test of few selected inorganic and organic phase change materials , 2008 .

[87]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[88]  Joseph Virgone,et al.  Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation , 2008 .

[89]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[90]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[91]  Zhiqiang Zhai,et al.  Modeling phase change materials embedded in building enclosure: A review , 2013 .

[92]  R. Velraj,et al.  Effect of double layer phase change material in building roof for year round thermal management , 2008 .

[93]  J. Fricke,et al.  PCM-facade-panel for daylighting and room heating , 2005 .

[94]  Tuan Ngo,et al.  A review on fire protection for phase change materials in building applications , 2013 .

[95]  Luigi Marletta,et al.  A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2013 .

[96]  Jay M. Khodadadi,et al.  Improvement in thermal conductivity of paraffin by adding high aspect-ratio carbon-based nano-fillers , 2013 .

[97]  Kim Robert Lisø,et al.  Robustness classification of materials, assemblies and buildings , 2014 .

[98]  P. Wakeley,et al.  Synthesis , 2013, The Role of Animals in Emerging Viral Diseases.

[99]  Kamil Kaygusuz,et al.  Encapsulated Fatty Acids in an Acrylic Resin as Shape-stabilized Phase Change Materials for Latent Heat Thermal Energy Storage , 2008 .

[100]  Bjørn Petter Jelle,et al.  Self-cleaning glazing products: A state-of-the-art review and future research pathways , 2013 .

[101]  Arild Gustavsen,et al.  Monodisperse hollow silica nanospheres for nano insulation materials: synthesis, characterization, and life cycle assessment. , 2013, ACS applied materials & interfaces.

[102]  Arild Gustavsen,et al.  Synthesis of Hollow Silica Nanospheres by Sacrificial Polystyrene Templates for Thermal Insulation Applications , 2013 .

[103]  L. Cabeza,et al.  Review of the T-history method to determine thermophysical properties of phase change materials (PCM) , 2013 .

[104]  Arild Gustavsen,et al.  Vacuum insulation panels for building applications: A review and beyond , 2010 .

[105]  Giuseppe Peter Vanoli,et al.  Energy refurbishment of existing buildings through the use of phase change materials: Energy savings and indoor comfort in the cooling season , 2014 .

[106]  Z. Lian,et al.  Quantitative measurement of productivity loss due to thermal discomfort , 2011 .

[107]  Teuku Meurah Indra Mahlia,et al.  Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol–gel method , 2013 .

[108]  Peijun Ji,et al.  Improvement of the thermal conductivity of a phase change material by the functionalized carbon nanotubes , 2012 .

[109]  Yajuan Zhong,et al.  Heat transfer enhancement of paraffin wax using graphite foam for thermal energy storage , 2010 .

[110]  Jean-Claude Tedenac,et al.  Review of Materials , 1977 .

[111]  Martin Tenpierik,et al.  Vacuum Insulation Panels Applied in Building Constructions , 2010 .

[112]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[113]  S. C. Kaushik,et al.  DEVELOPMENT OF PHASE CHANGE MATERIALS BASED MICROENCAPSULATED TECHNOLOGY FOR BUILDINGS: A REVIEW , 2011 .

[114]  A. Sari,et al.  Capric–myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage , 2008 .

[115]  Arild Gustavsen,et al.  Properties, Requirements and Possibilities of Smart Windows for Dynamic Daylight and Solar Energy Control in Buildings: A State-of-the-Art Review , 2010 .

[116]  C. Poon,et al.  Use of phase change materials for thermal energy storage in concrete: An overview , 2013 .

[117]  D. W. Yarbrough,et al.  Dynamic thermal performance analysis of fiber insulations containing bio-based phase change materials (PCMs) , 2012 .

[118]  Kaushik Biswas,et al.  Field thermal performance of naturally ventilated solar roof with PCM heat sink , 2012 .

[119]  Jan Kosny,et al.  Performance characterization of PCM impregnated gypsum board for building applications , 2012 .

[120]  Xingrong Zeng,et al.  Preparation, characterization and thermal properties of nanocapsules containing phase change material n-dodecanol by miniemulsion polymerization with polymerizable emulsifier , 2012 .

[121]  Arild Gustavsen,et al.  Fenestration of Today and Tomorrow: A State-of-the-Art Review and Future Research Opportunities , 2013 .