Multi-objective design and operation of Solid Oxide Fuel Cell (SOFC) Triple Combined-cycle Power Generation systems: Integrating energy efficiency and operational safety

Energy efficiency is one of the main pathways for energy security and environmental protection. In fact, the International Energy Agency asserts that without energy efficiency, 70% of targeted emission reductions are not achievable. Despite this clarity, enhancing the energy efficiency introduce significant challenge toward process operation. The reason is that the methods applied for energy-saving pose the process operation at the intersection of safety constraints. The present research aims at uncovering the trade-off between safe operation and energy efficiency; an optimization framework is developed that ensures process safety and simultaneously optimizes energy-efficiency, quantified in economic terms. The developed optimization framework is demonstrated for a solid oxide fuel cell (SOFC) power generation system. The significance of this industrial application is that SOFC power plants apply a highly degree of process integration resulting in very narrow operating windows. However, they are subject to significant uncertainties in power demand. The results demonstrate a strong trade-off between the competing objectives. It was observed that highly energy-efficient designs feature a very narrow operating window and limited flexibility. For instance, expanding the safe operating window by 100% will incur almost 47% more annualized costs. Establishing such a trade-off is essential for realizing energy-saving.

[1]  Mahmoud M. El-Halwagi,et al.  Multiobjective optimization of biorefineries with economic and safety objectives , 2013 .

[2]  Jack Brouwer,et al.  Fuel cell–gas turbine hybrid system design part I: Steady state performance , 2014 .

[3]  Azmi Mohd Shariff,et al.  Inherent safety index module (ISIM) to assess inherent safety level during preliminary design stage , 2008 .

[4]  Nina F. Thornhill,et al.  Energy Induced Separation Network Synthesis of an Olefin Compression Section: A Case Study , 2011 .

[5]  F. Calise,et al.  Design and partial load exergy analysis of hybrid SOFC–GT power plant , 2006 .

[6]  Alberto Traverso,et al.  Transfer function development for SOFC/GT hybrid systems control using cold air bypass , 2016 .

[7]  Gheorghe Maria,et al.  Variability of operating safety limits with catalyst within a fixed-bed catalytic reactor for vapour-phase nitrobenzene hydrogenation , 2010 .

[8]  Ignacio E. Grossmann,et al.  Evolution of concepts and models for quantifying resiliency and flexibility of chemical processes , 2014, Comput. Chem. Eng..

[9]  Ioannis K. Kookos,et al.  Parametric and transient analysis of non-isothermal, planar solid oxide fuel cells , 2012 .

[10]  Thomas A. Adams,et al.  Impact of fuel composition transients on SOFC performance in gas turbine hybrid systems , 2016 .

[11]  P. K. Marhavilas,et al.  Risk analysis and assessment methodologies in the work sites: On a review, classification and comparative study of the scientific literature of the period 2000–2009 , 2011 .

[12]  Yiwu Weng,et al.  Effect of operating parameters on a hybrid system of intermediate-temperature solid oxide fuel cell and gas turbine , 2015 .

[13]  Andreas L. Opdahl,et al.  Comparing risk identification techniques for safety and security requirements , 2013, J. Syst. Softw..

[14]  Luca Podofillini,et al.  Conventional and dynamic safety analysis: Comparison on a chemical batch reactor , 2012, Reliab. Eng. Syst. Saf..

[15]  Nilay Shah,et al.  A case study in hybrid process safety verification , 1996 .

[16]  Shuang-Hua Yang,et al.  Improve Safety of Industrial Processes Using Dynamic Operator Training Simulators , 2001 .

[17]  Mustafa Fazil Serincan,et al.  Effects of operating conditions on the performance of a micro-tubular solid oxide fuel cell (SOFC) , 2009 .

[18]  F. Jabbari,et al.  Investigation of thermal control for different SOFC flow geometries , 2016 .

[19]  Kai Sundmacher,et al.  Theoretical investigation of steady state multiplicities in solid oxide fuel cells* , 2006 .

[20]  Ashok Rao,et al.  Analysis and optimization of a solid oxide fuel cell and intercooled gas turbine (SOFC-ICGT) hybrid cycle , 2004 .

[21]  Maurício Bezerra de Souza,et al.  Quantitative risk assessment integrated with process simulator for a new technology of methanol production plant using recycled CO₂. , 2014, Journal of hazardous materials.

[22]  Xiongwen Zhang,et al.  A review of integration strategies for solid oxide fuel cells , 2010 .

[23]  Andrea Luigi Facci,et al.  Technical and economic assessment of a SOFC-based energy system for combined cooling, heating and power , 2017 .

[24]  Alexandros Arsalis,et al.  Thermoeconomic modeling and parametric study of hybrid SOFC–gas turbine–steam turbine power plants ranging from 1.5 to 10 MWe , 2008 .

[25]  Nilay Shah,et al.  Carbon capture from pulverized coal power plant (PCPP): Solvent performance comparison at an industrial scale , 2016 .

[26]  Ignacio E. Grossmann,et al.  Optimization strategies for flexible chemical processes , 1983 .

[27]  Francesco Calise,et al.  Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: A review , 2015 .

[28]  Azmi Mohd Shariff,et al.  Qualitative Assessment for Inherently Safer Design (QAISD) at preliminary design stage , 2010 .

[29]  Franz Joos,et al.  Using Linear Control Theory for Parameterization of a Controller for a SOFC/GT Hybrid Power Plant , 2010 .

[30]  Helen H. Lou,et al.  Fast process security assessment theory , 2004 .

[31]  M. G. Norton,et al.  Gasoline-fueled solid oxide fuel cell with high power density , 2014 .

[32]  Bengt Sundén,et al.  Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells , 2010 .

[33]  Faisal Khan,et al.  I2SI: A comprehensive quantitative tool for inherent safety and cost evaluation , 2005 .

[34]  Mahdi Sharifzadeh,et al.  Integration of process design and control: A review , 2013 .

[35]  Rajagopalan Srinivasan,et al.  A statistical approach for evaluating inherent benign-ness of chemical process routes in early design stages , 2008 .

[36]  M. G. Norton,et al.  Gasoline-fueled solid oxide fuel cell using MoO2-Based Anode , 2014 .

[37]  Valerio Cozzani,et al.  Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study. , 2008, Journal of hazardous materials.

[38]  Jiyong Kim,et al.  An index-based risk assessment model for hydrogen infrastructure , 2011 .

[39]  Nilay Shah,et al.  Carbon capture from natural gas combined cycle power plants: Solvent performance comparison at an industrial scale , 2016 .

[40]  Valerio Cozzani,et al.  Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description. , 2008, Journal of hazardous materials.

[41]  Nigel P. Brandon,et al.  Optimal integration strategies for a syngas fuelled SOFC and gas turbine hybrid , 2011 .

[42]  Mahmoud M. El-Halwagi,et al.  The integration of Dow's fire and explosion index (F&EI) into process design and optimization to achieve inherently safer design , 2007 .

[43]  Jing Sun,et al.  Feasibility study of solid oxide fuel cell engines integrated with sprinter gas turbines: Modeling, design and control , 2015 .

[44]  Mahdi Sharifzadeh,et al.  Inherently safe and economically optimal design using multi-objective optimization: the case of a refrigeration cycle , 2016 .

[45]  Mahdi Sharifzadeh,et al.  Implementation of a steady-state inversely controlled process model for integrated design and control of an ETBE reactive distillation , 2013 .

[46]  Azmi Mohd Shariff,et al.  Toxic release consequence analysis tool (TORCAT) for inherently safer design plant. , 2010, Journal of hazardous materials.

[47]  Shinji Kimijima,et al.  Performance analysis of the SOFC–MGT hybrid system with gasified biomass fuel , 2007 .

[48]  Xin-Jian Zhu,et al.  Optimization of a solid oxide fuel cell and micro gas turbine hybrid system , 2013 .

[49]  Lars Imsland,et al.  Control strategy for a solid oxide fuel cell and gas turbine hybrid system , 2006 .

[50]  Nilay Shah,et al.  Quantitative framework for reliable safety analysis , 2002 .

[51]  Nikolaos Kazantzis,et al.  Economic assessment of inherently safe membrane reactor technology options integrated into IGCC power plants , 2012 .

[52]  Masoud Soroush,et al.  Steady-state multiplicity in a solid oxide fuel cell: Practical considerations , 2012 .

[53]  Umberto Desideri,et al.  SOFC fuelled with reformed urea , 2015 .

[54]  Denver Cheddie,et al.  Thermo-economic modeling of an indirectly coupled solid oxide fuel cell/gas turbine hybrid power plant , 2010 .

[55]  János Abonyi,et al.  Determination of Safety Operating Regimes Based on the Analysis of Characteristic Equation of State-Space Model , 2008 .

[56]  Fabio Rinaldi,et al.  Thermal–economic–environmental analysis and multi-objective optimization of an internal-reforming solid oxide fuel cell–gas turbine hybrid system , 2012 .

[57]  Nina F. Thornhill,et al.  Integrated design and control using a dynamic inversely controlled process model , 2013, Comput. Chem. Eng..

[58]  Youdong Lin,et al.  Rigorous model-based safety analysis for nonlinear continuous-time systems , 2009, Comput. Chem. Eng..

[59]  G. P. Rangaiah,et al.  Inherent Safety Analysis of a Propane Precooled Gas-Phase Liquified Natural Gas Process , 2009 .

[60]  Mimi Haryani Hassim,et al.  Numerical Descriptive Inherent Safety Technique (NuDIST) for inherent safety assessment in petrochemical industry , 2014 .

[61]  Azmi Mohd Shariff,et al.  Process route index (PRI) to assess level of explosiveness for inherent safety quantification , 2009 .

[62]  François Maréchal,et al.  Large size biogas-fed Solid Oxide Fuel Cell power plants with carbon dioxide management: Technical and economic optimization , 2015 .

[63]  Warren D. Seider,et al.  Real-time risk analysis of safety systems , 2008, Comput. Chem. Eng..

[64]  Thierry Meyer,et al.  Risk analysis in research environment , 2012 .

[65]  M. Sam Mannan,et al.  Development of inherently safer distillation systems , 2014 .

[66]  Kailiang Zheng,et al.  Sustainability assessment of polygeneration processes based on syngas derived from coal and natural gas , 2012, Comput. Chem. Eng..

[67]  Thomas A. Adams,et al.  Coal-fuelled systems for peaking power with 100% CO2 capture through integration of solid oxide fuel cells with compressed air energy storage , 2014 .

[68]  Nina F. Thornhill,et al.  Optimal selection of control structure using a steady-state inversely controlled process model , 2012, Comput. Chem. Eng..