Effect of cyclic compression on structure and properties of a Gas Diffusion Layer used in PEM fuel cells

Abstract Proton Exchange Membrane Fuel Cell (PEMFC) components are known to deteriorate during use, in time scales much shorter than that required for commercially successful deployment of this technology. Therefore, servicing operations such as identifying and replacing poorly performing components will likely be required to extend the operational lifetime of PEMFC stacks. During such servicing operations fuel cell components are subjected to cyclic compression and expansion due to opening and rebuilding of the fuel cell stack. This cyclic compression may further contribute to the deterioration of PEMFC components. There are several reports in the literature showing the effect of static compression on change in GDL properties, however the present work focuses on the effect of cyclic compression on GDL properties, an aspect that has not been reported in detail elsewhere. This paper focuses on the impact of cyclic compression on the Gas Diffusion Layer (GDL). The results indicate that cyclic compression causes significant and irreversible changes to the structure and properties of the GDL such as surface morphology, surface roughness, pore size, void fraction, thickness, electrical resistance, contact angle, water uptake and in-plane permeability. The implications of these results are considered.

[1]  Jenn-Jiang Hwang,et al.  Effect of clamping pressure on the performance of a PEM fuel cell , 2007 .

[2]  A. Morin,et al.  Characterization of PEMFCs gas diffusion layers properties , 2006 .

[3]  A. Vahidi,et al.  A review of the main parameters influencing long-term performance and durability of PEM fuel cells , 2008 .

[4]  Huamin Zhang,et al.  Electrochemical durability of gas diffusion layer under simulated proton exchange membrane fuel cell conditions , 2009 .

[5]  Walter Mérida,et al.  Gas diffusion layer durability under steady-state and freezing conditions , 2007 .

[6]  Göran Lindbergh,et al.  Flooding of Gas Diffusion Backing in PEFCs Physical and Electrochemical Characterization , 2004 .

[7]  Characterization of internal wetting in polymer electrolyte membrane gas diffusion layers , 2009 .

[8]  Olli Himanen,et al.  PEMFC temperature distribution caused by inhomogeneous compression of GDL , 2007 .

[9]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[10]  P. Sui,et al.  A numerical investigation of the effects of compression force on PEM fuel cell performance , 2008 .

[11]  Hyung Jin Sung,et al.  Effect of GDL permeability on water and thermal management in PEMFCs—II. Clamping force , 2008 .

[12]  P. Adcock,et al.  Stainless steel as a bipolar plate material for solid polymer fuel cells , 2000 .

[13]  Tero Hottinen,et al.  Inhomogeneous compression of PEMFC gas diffusion layer: Part I. Experimental , 2007 .

[14]  Xianguo Li,et al.  Measurement of through-plane effective thermal conductivity and contact resistance in PEM fuel cell diffusion media , 2010 .

[15]  R. Yassar,et al.  Effect of deformation on electrical properties of carbon fibers used in gas diffusion layer of proton exchange membrane fuel cells , 2009 .

[16]  David Blackwell,et al.  Water flow in the gas diffusion layer of PEM fuel cells , 2005 .

[17]  N. Djilali,et al.  Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers , 2007 .

[18]  Chengwei Wu,et al.  Numerical study on the compression effect of gas diffusion layer on PEMFC performance , 2007 .

[19]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[20]  Yen-Ju Su,et al.  Effect of gas diffusion layer compression on the performance in a proton exchange membrane fuel cell , 2008 .

[21]  P. Sui,et al.  On the effects of non-uniform property distribution due to compression in the gas diffusion layer of a PEMFC , 2010 .

[22]  Andrew Higier,et al.  Effect of gas diffusion layer compression on PEM fuel cell performance , 2006 .

[23]  Mathias Schulze,et al.  Combined electrochemical and surface analysis investigation of degradation processes in polymer electrolyte membrane fuel cells , 2007 .