To Promote the Catalytic Conversion of Polysulfides Using Ni-B Alloy Nanoparticles on Carbon Nanotube Microspheres under High Sulfur Loading and a Lean Electrolyte.

Despite their high theoretical energy density, the application of lithium-sulfur batteries is seriously hindered by the polysulfide shuttle and sluggish kinetics, especially with high sulfur loading and under low electrolyte usage. Herein, to facilitate the conversion of lithium polysulfides, nickel-boron (Ni-B) alloy nanoparticles, dispersed uniformly on carbon nanotube microspheres (CNTMs), are used as sulfur hosts for lithium-sulfur batteries. It is demonstrated that Ni-B alloy nanoparticles can not only anchor polysulfides through Ni-S and B-S interactions but also exhibit high electrocatalytic capability toward the conversion of intermediate polysulfide species. In addition, the intertwined CNT microspheres provide an additional conductive scaffold in response to the fast electrochemical redox. The enhanced redox kinetics is beneficial to improve the specific capacity and cycling stability of the sulfur cathode, based on the fast conversion of lithium polysulfides and effective deposition of the final sulfide products. Conclusively, the S/Ni-B/CNTM composite delivers a high specific capacity (1112.7 mAh gs-1) along with good cycle performance under both high sulfur loading (8.3 mg cm-2) and a lean electrolyte (3 μL mgs-1). Consequently, this study opens up a path to design new sulfur hosts toward lithium-sulfur batteries.

[1]  Weiyang Li,et al.  Room‐Temperature Sodium–Sulfur Batteries and Beyond: Realizing Practical High Energy Systems through Anode, Cathode, and Electrolyte Engineering , 2021, Advanced Energy Materials.

[2]  Jiaqi Huang,et al.  An Organodiselenide Comediator to Facilitate Sulfur Redox Kinetics in Lithium–Sulfur Batteries , 2021, Advanced materials.

[3]  Xueping Gao,et al.  Constructing high gravimetric and volumetric capacity sulfur cathode with LiCoO2 nanofibers as carbon-free sulfur host for lithium-sulfur battery , 2021, Science China Materials.

[4]  Xueping Gao,et al.  The Fundamental Understanding of Lithium Polysulfides in Ether-Based Electrolyte for Lithium–Sulfur Batteries , 2021 .

[5]  Xianyou Wang,et al.  Porous NiCo2S4 Nanoneedle Arrays with Highly Efficient Electrocatalysis Anchored on Carbon Cloths as Self-Supported Hosts for High-Loading Li-S Batteries. , 2020, ACS applied materials & interfaces.

[6]  J. Tu,et al.  Potassium Hexafluorophosphate Additive Enables Stable Lithium-Sulfur Batteries. , 2020, ACS applied materials & interfaces.

[7]  Jun Zhang,et al.  Tuning the Band Structure of MoS2 via Co9S8@MoS2 Core-Shell Structure to Boost Catalytic Activity for Lithium-Sulfur Batteries. , 2020, ACS nano.

[8]  Xueping Gao,et al.  To effectively drive the conversion of sulfur with electroactive niobium tungsten oxide microspheres for lithium−sulfur battery , 2020 .

[9]  Dan Zhou,et al.  Selective S/Li2S Conversion via in-Built Crystal Facet Self-Mediation: Toward High Volumetric Energy Density Lithium-Sulfur Batteries. , 2020, ACS nano.

[10]  Zhiqun Lin,et al.  Carbon/Sulfur Aerogel with Adequate Mesoporous Channels as Robust Polysulfide Confinement Matrix for Highly Stable Lithium-Sulfur Battery. , 2020, Nano letters.

[11]  Z. Seh,et al.  Fast conversion and controlled deposition of lithium (poly)sulfides in lithium-sulfur batteries using high-loading cobalt single atoms , 2020 .

[12]  Cheng-Zong Yuan,et al.  Enhanced Catalytic Conversion of Polysulfides Using Bimetallic Co7Fe3 for High-Performance Lithium-Sulfur Batteries. , 2020, ACS nano.

[13]  B. Dunn,et al.  A fundamental look at electrocatalytic sulfur reduction reaction , 2020, Nature Catalysis.

[14]  X. Ren,et al.  Dual‐Functional Atomic Zinc Decorated Hollow Carbon Nanoreactors for Kinetically Accelerated Polysulfides Conversion and Dendrite Free Lithium Sulfur Batteries , 2020, Advanced Energy Materials.

[15]  Feng Wu,et al.  Rational Tuning of Li4SiO4-Based Hybrid Interface with Unique Stepwise Pre-Lithiation for Dendrite-Proof and High-Rate Lithium Anode. , 2020, ACS applied materials & interfaces.

[16]  Jiaqi Huang,et al.  A Perspective toward Practical Lithium–Sulfur Batteries , 2020, ACS central science.

[17]  David G. Mackanic,et al.  Electrode Design with Integration of High Tortuosity and Sulfur-Philicity for High-Performance Lithium-Sulfur Battery , 2020, Matter.

[18]  Jun Lu,et al.  Rational Design of a Ni3N0.85 Electrocatalyst to Accelerate Polysulfide Conversion in Lithium-Sulfur Batteries. , 2020, ACS nano.

[19]  J. Moon,et al.  Complete encapsulation of sulfur through interfacial energy control of sulfur solutions for high-performance Li−S batteries , 2020, Proceedings of the National Academy of Sciences.

[20]  Sung-Fu Hung,et al.  Amorphous vs Crystalline in Water Oxidation Catalysis: A Case Study of NiFe alloy. , 2020, Nano letters.

[21]  Wenguang Tu,et al.  Catalytic Polysulfide Conversion and Physiochemical Confinement for Lithium–Sulfur Batteries , 2020, Advanced Energy Materials.

[22]  YunKyoung Kim,et al.  Unraveling the Dual Functionality of High‐Donor‐Number Anion in Lean‐Electrolyte Lithium‐Sulfur Batteries , 2020, Advanced Energy Materials.

[23]  N. Koratkar,et al.  Efficient Polysulfide Redox Enabled by Lattice-Distorted Ni3Fe Intermetallic Electrocatalyst Modified Separator for Lithium-Sulfur Battery. , 2020, ACS applied materials & interfaces.

[24]  W. Zhou,et al.  Monodispersed Nickel Phosphide Nanocrystals in Situ Grown on Reduced Graphene Oxide with Controllable Size and Composition as a Counter Electrode for Dye-Sensitized Solar Cells , 2020, ACS Sustainable Chemistry & Engineering.

[25]  Xueping Gao,et al.  Conductive RuO2 stacking microspheres as an effective sulfur immobilizer for lithium–sulfur battery , 2020 .

[26]  Jim P. Zheng,et al.  Metallically conductive TiB2 as a multi-functional separator modifier for improved lithium sulfur batteries , 2020 .

[27]  Wenming Zhang,et al.  Three-dimensional CoNi alloy nanoparticle and carbon nanotube decorated N-doped carbon nanosheet arrays for use as bifunctional electrocatalysts in wearable and flexible Zn-air batteries , 2020, Nanotechnology.

[28]  Xueping Gao,et al.  Spherical Metal Oxides with High Tap Density as Sulfur Host to Enhance Cathode Volumetric Capacity for Lithium-Sulfur Battery. , 2020, ACS applied materials & interfaces.

[29]  Ze Zhang,et al.  Facile Synthesis of a "Two-in-One" Sulfur Host Featuring Metallic Cobalt-embedded N-doped CNTs for Efficient Lithium-sulfur Batteries. , 2020, ACS applied materials & interfaces.

[30]  Z. Seh,et al.  Enhanced Chemical Immobilization and Catalytic Conversion of Polysulfide Intermediates Using Metallic Mo Nanoclusters for High-Performance Li-S Batteries. , 2019, ACS Nano.

[31]  Yang Liu,et al.  Lithium‐Sulfur Batteries: Constructing Patch‐Ni‐Shelled Pt@Ni Nanoparticles within Confined Nanoreactors for Catalytic Oxidation of Insoluble Polysulfides in Li‐S Batteries (Small 34/2019) , 2019, Small.

[32]  Zaiping Guo,et al.  Interfacial Engineering of Nickel Boride/Metaborate and Its Effect on High Energy Density Asymmetric Supercapacitors. , 2019, ACS nano.

[33]  Xueping Gao,et al.  Conductive CoOOH as Carbon‐Free Sulfur Immobilizer to Fabricate Sulfur‐Based Composite for Lithium–Sulfur Battery , 2019, Advanced Functional Materials.

[34]  Yan‐Bing He,et al.  LiNi0.8Co0.15Al0.05O2 as both a trapper and accelerator of polysulfides for lithium-sulfur batteries , 2019, Energy Storage Materials.

[35]  Xueping Gao,et al.  NiCo2O4 Nanofibers as Carbon‐Free Sulfur Immobilizer to Fabricate Sulfur‐Based Composite with High Volumetric Capacity for Lithium–Sulfur Battery , 2019, Advanced Energy Materials.

[36]  Dipan Kundu,et al.  Lightweight Metallic MgB2 Mediates Polysulfide Redox and Promises High-Energy-Density Lithium-Sulfur Batteries , 2019, Joule.

[37]  Hong‐Jie Peng,et al.  The Radical Pathway Based on a Lithium-Metal-Compatible High-Dielectric Electrolyte for Lithium-Sulfur Batteries. , 2018, Angewandte Chemie.

[38]  Yi‐Chun Lu,et al.  Solvent‐Mediated Li2S Electrodeposition: A Critical Manipulator in Lithium–Sulfur Batteries , 2018, Advanced Energy Materials.

[39]  G. Zheng,et al.  Elucidating the Catalytic Activity of Oxygen Deficiency in the Polysulfide Conversion Reactions of Lithium–Sulfur Batteries , 2018, Advanced Energy Materials.

[40]  Jun Liu,et al.  Hierarchical electrode architectures for high energy lithium-chalcogen rechargeable batteries , 2018, Nano Energy.

[41]  H. Fan,et al.  Promoting lithium polysulfide/sulfide redox kinetics by the catalyzing of zinc sulfide for high performance lithium-sulfur battery , 2018, Nano Energy.

[42]  H. Fan,et al.  Updated Metal Compounds (MOFs, S, OH, N, C) Used as Cathode Materials for Lithium–Sulfur Batteries , 2018 .

[43]  Feng Li,et al.  More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects , 2017, Advanced materials.

[44]  Feng Wu,et al.  Recent progresses on nickel-rich layered oxide positive electrode materials used in lithium-ion batteries for electric vehicles , 2017 .

[45]  Xueping Gao,et al.  A High‐Efficiency Sulfur/Carbon Composite Based on 3D Graphene Nanosheet@Carbon Nanotube Matrix as Cathode for Lithium–Sulfur Battery , 2017 .

[46]  Yousung Jung,et al.  Heterogeneous Catalysis for Lithium–Sulfur Batteries: Enhanced Rate Performance by Promoting Polysulfide Fragmentations , 2017 .

[47]  Hong‐Jie Peng,et al.  Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium-Sulfur Batteries. , 2016, Angewandte Chemie.

[48]  L. Arava,et al.  Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li-S Batteries. , 2015, Journal of the American Chemical Society.

[49]  Frank Y. Fan,et al.  Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries , 2015, Advanced materials.

[50]  Xiao Liang,et al.  A highly efficient polysulfide mediator for lithium–sulfur batteries , 2015, Nature Communications.

[51]  Hexing Li,et al.  Self-assembly of mesoporous Ni–B amorphous alloy catalysts , 2006 .