Brillouin optical time-domain analysis assisted by second-order Raman amplification.

We propose and experimentally demonstrate a new method to extend the range of Brillouin optical time domain analysis (BOTDA) systems. It exploits the virtual transparency created by second-order Raman pumping in optical fibers. The idea is theoretically analyzed and experimentally demonstrated in a 50 km fiber. By working close to transparency, we also show that the measurement length of the BOTDA can be increased up to 100 km with 2 meter resolution. We envisage extensions of this technique to measurement lengths well beyond this value, as long as the issue of relative intensity noise (RIN) of the primary Raman pump can be avoided.

[1]  Pedro Corredera,et al.  Distributed Brillouin Fiber Sensor Assisted by First-Order Raman Amplification , 2010, Journal of Lightwave Technology.

[2]  G. Bolognini,et al.  Optical pulse coding in hybrid distributed sensing based on Raman and Brillouin scattering employing Fabry-Perot lasers. , 2010, Optics express.

[3]  G. Bolognini,et al.  Analysis of optical pulse coding in spontaneous Brillouin-based distributed temperature sensors. , 2008, Optics express.

[4]  M. González-Herráez,et al.  Brillouin Optical Time-Domain Analysis of Fiber-Optic Parametric Amplifiers , 2006, IEEE Photonics Technology Letters.

[5]  P. Gallion,et al.  New model of noise figure and RIN transfer in fiber Raman amplifiers , 2006, IEEE Photonics Technology Letters.

[6]  Trevor P. Newson,et al.  150-km-range distributed temperature sensor based on coherent detection of spontaneous Brillouin backscatter and in-line Raman amplification , 2005 .

[7]  J. Ania-Castañón.  Quasi-lossless transmission using second-order Raman amplification and fibre Bragg gratings. , 2004, Optics express.

[8]  Hiroshi Naruse,et al.  Dependence of the Brillouin gain spectrum on linear strain distribution for optical time-domain reflectometer-type strain sensors. , 2002, Applied optics.

[9]  David J. Webb,et al.  25 km Brillouin based single-ended distributed fibre sensor for threshold detection of temperature or strain , 1999 .

[10]  Anthony W. Brown,et al.  Spatial resolution enhancement of a Brillouin-distributed sensor using a novel signal processing method , 1999 .

[11]  X. Bao,et al.  Structural monitoring by use of a Brillouin distributed sensor. , 1999, Applied optics.

[12]  L. Thévenaz,et al.  Simple distributed fiber sensor based on Brillouin gain spectrum analysis. , 1996, Optics letters.

[13]  X. Bao,et al.  32-km distributed temperature sensor based on Brillouin loss in an optical fiber. , 1993, Optics letters.

[14]  T. Horiguchi,et al.  A technique to measure distributed strain in optical fibers , 1990, IEEE Photonics Technology Letters.

[15]  T. Horiguchi,et al.  Optical-fiber-attenuation investigation using stimulated Brillouin scattering between a pulse and a continuous wave. , 1989, Optics letters.