Development of a novel bioelectrochemical membrane reactor for wastewater treatment.

A novel bioelectrochemical membrane reactor (BEMR), which takes advantage of a membrane bioreactor (MBR) and microbial fuel cells (MFC), is developed for wastewater treatment and energy recovery. In this system, stainless steel mesh with biofilm formed on it serves as both the cathode and the filtration material. Oxygen reduction reactions are effectively catalyzed by the microorganisms attached on the mesh. The effluent turbidity from the BEMR system was low during most of the operation period, and the chemical oxygen demand and NH(4)(+)-N removal efficiencies averaged 92.4% and 95.6%, respectively. With an increase in hydraulic retention time and a decrease in loading rate, the system performance was enhanced. In this BEMR process, a maximum power density of 4.35 W/m(3) and a current density of 18.32 A/m(3) were obtained at a hydraulic retention time of 150 min and external resister of 100 Ω. The Coulombic efficiency was 8.2%. Though the power density and current density of the BEMR system were not very high, compared with other high-output MFC systems, electricity recovery could be further enhanced through optimizing the operation conditions and BEMR configurations. Results clearly indicate that this innovative system holds great promise for efficient treatment of wastewater and energy recovery.

[1]  J. Tay,et al.  Staining of extracellular polymeric substances and cells in bioaggregates , 2007, Applied Microbiology and Biotechnology.

[2]  Bruce E. Logan,et al.  Scaling up microbial fuel cells and other bioelectrochemical systems , 2010, Applied Microbiology and Biotechnology.

[3]  Say Kee Ong,et al.  Impact of solids residence time on biological nutrient removal performance of membrane bioreactor. , 2010, Water research.

[4]  Zhiguo Yuan,et al.  Biofilm stratification during simultaneous nitrification and denitrification (SND) at a biocathode. , 2011, Bioresource technology.

[5]  C. Picioreanu,et al.  Microbial fuel cells meet with external resistance. , 2011, Bioresource technology.

[6]  Hong Liu,et al.  Power densities using different cathode catalysts (Pt and CoTMPP) and polymer binders (nafion and PTFE) in single chamber microbial fuel cells. , 2006, Environmental science & technology.

[7]  Bin Fan,et al.  Characteristics of a self-forming dynamic membrane coupled with a bioreactor for municipal wastewater treatment. , 2002, Environmental science & technology.

[8]  Irini Angelidaki,et al.  Innovative microbial fuel cell for electricity production from anaerobic reactors , 2008 .

[9]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[10]  Mark D. Williams,et al.  Membrane bioreactor process for removing biodegradable organic matter from water. , 2007, Water research.

[11]  Katsutoshi Hori,et al.  Effects of microbial degradation of biofoulants on microfiltration membrane performance in a membrane bioreactor. , 2010, Environmental science & technology.

[12]  J. Ni,et al.  Palm oil mill effluent treatment using a two-stage microbial fuel cells system integrated with immobilized biological aerated filters. , 2010, Bioresource technology.

[13]  Chung‐Hak Lee,et al.  Comparison of the filtration characteristics between attached and suspended growth microorganisms in submerged membrane bioreactor. , 2001, Water research.

[14]  Kazuo Yamamoto,et al.  Floc size distribution and bacterial activities in membrane separation activated sludge processes for small-scale wastewater treatment/reclamation , 1997 .

[15]  Harald Horn,et al.  Influence of growth conditions on biofilm development and mass transfer at the bulk/biofilm interface. , 2002, Water research.

[16]  Hanqing Yu,et al.  Integration of a microbial fuel cell with activated sludge process for energy‐saving wastewater treatment: Taking a sequencing batch reactor as an example , 2011, Biotechnology and bioengineering.

[17]  Soo-Jin Choi,et al.  Directly applicable microbial fuel cells in aeration tank for wastewater treatment. , 2010, Bioelectrochemistry.

[18]  B. Logan,et al.  Mesh optimization for microbial fuel cell cathodes constructed around stainless steel mesh current collectors , 2011 .

[19]  Wei Jin,et al.  Characteristics of bio-diatomite dynamic membrane process for municipal wastewater treatment , 2008 .

[20]  W. Verstraete,et al.  Continuous electricity generation at high voltages and currents using stacked microbial fuel cells. , 2006, Environmental science & technology.

[21]  Xiao-yan Li,et al.  Accumulation of biopolymer clusters in a submerged membrane bioreactor and its effect on membrane fouling. , 2008, Water research.

[22]  Zhichao Wu,et al.  Relationship between sludge characteristics and membrane flux determination in submerged membrane bioreactors , 2006 .

[23]  M. He,et al.  Function of self-forming dynamic membrane and biokinetic parameters' determination by microelectrode. , 2008, Water research.

[24]  D. Lovley.  The microbe electric: conversion of organic matter to electricity. , 2008, Current opinion in biotechnology.

[25]  Fenglin Yang,et al.  Enhanced biological nutrient removal using MUCT-MBR system. , 2009, Bioresource technology.

[26]  Filtration capability and operational characteristics of dynamic membrane bioreactor for municipal wastewater treatment , 2006 .

[27]  H. May,et al.  Electrochemical evidence of direct electrode reduction by a thermophilic Gram-positive bacterium, Thermincola ferriacetica , 2009 .

[28]  Baogang Zhang,et al.  A novel UASB-MFC-BAF integrated system for high strength molasses wastewater treatment and bioelectricity generation. , 2009, Bioresource technology.