Employment of polyurethane foam for the adsorption of Methylene Blue in aqueous medium.

[1]  B. Girgis,et al.  Removal of methylene blue by carbons derived from peach stones by H3PO4 activation: Batch and column studies , 2008 .

[2]  Megha Mathur,et al.  Removal of the hazardous dye rhodamine B through photocatalytic and adsorption treatments. , 2007, Journal of environmental management.

[3]  Z. Zainal,et al.  Removal of basic and reactive dyes using ethylenediamine modified rice hull. , 2007, Bioresource technology.

[4]  R. Cassella,et al.  Characterization of solid-phase extraction of Fe(III) by unloaded polyurethane foam as thiocyanate complex. , 2007, Journal of colloid and interface science.

[5]  W. Tsai,et al.  The adsorption of cationic dye from aqueous solution onto acid-activated andesite. , 2007, Journal of hazardous materials.

[6]  M. El-Khaiary.  Kinetics and mechanism of adsorption of methylene blue from aqueous solution by nitric-acid treated water-hyacinth. , 2007, Journal of hazardous materials.

[7]  V. Vilar,et al.  Methylene blue adsorption by algal biomass based materials: biosorbents characterization and process behaviour. , 2007, Journal of hazardous materials.

[8]  G. Crini,et al.  Removal of C.I. Basic Green 4 (Malachite Green) from aqueous solutions by adsorption using cyclodextrin-based adsorbent: Kinetic and equilibrium studies , 2007 .

[9]  J. Yang,et al.  Equilibrium and kinetic studies on sorption of basic dyes by a natural biopolymer poly(γ-glutamic acid) , 2006 .

[10]  E. Muniz,et al.  Removal of methylene blue dye from an aqueous media using superabsorbent hydrogel supported on modified polysaccharide. , 2006, Journal of colloid and interface science.

[11]  Shaobin Wang,et al.  Characterisation and environmental application of an Australian natural zeolite for basic dye removal from aqueous solution. , 2006, Journal of hazardous materials.

[12]  C. A. Başar.  Applicability of the various adsorption models of three dyes adsorption onto activated carbon prepared waste apricot. , 2006, Journal of hazardous materials.

[13]  O. Hamdaoui.  Batch study of liquid-phase adsorption of methylene blue using cedar sawdust and crushed brick. , 2006, Journal of hazardous materials.

[14]  Y. Bulut,et al.  A kinetics and thermodynamics study of methylene blue adsorption on wheat shells , 2006 .

[15]  S. Kaul,et al.  Removal of basic dyes from aqueous medium using a novel polymer: Jalshakti. , 2006, Bioresource technology.

[16]  Shaobin Wang,et al.  Application of zeolite MCM-22 for basic dye removal from wastewater. , 2006, Journal of colloid and interface science.

[17]  P. Janoš,et al.  Effects of surfactants on the adsorptive removal of basic dyes from water using an organomineral sorbent-iron humate. , 2005, Journal of colloid and interface science.

[18]  R. Santelli,et al.  Solid-Phase Extraction of Cd(II) as Diethyldithiocarbamate Complex by Polyurethane Foam: Kinetic and Thermodynamic Characterization , 2004 .

[19]  J. Yang,et al.  Silica adsorbent prepared from spent diatomaceous earth and its application to removal of dye from aqueous solution. , 2004, Journal of colloid and interface science.

[20]  Shivaji Srivastava,et al.  Toxicological effects of malachite green. , 2004, Aquatic toxicology.

[21]  R. Santelli,et al.  Determination of lead by electrothermal atomic absorption spectrometry employing a novel sampling strategy of polyurethane foam impregnated with thiazolylazo-p-cresol (TAC) , 2004 .

[22]  A. Gürses,et al.  Determination of adsorptive properties of clay/water system: methylene blue sorption. , 2004, Journal of colloid and interface science.

[23]  R. Santelli,et al.  Solid phase extraction of Cu(II) as diethyldithiocarbamate (DDTC) complex by polyurethane foam , 2003 .

[24]  M. Muhler,et al.  Adsorptive removal of methylene blue from colored effluents on fuller's earth. , 2003, Journal of colloid and interface science.

[25]  Feng-Chin Wu,et al.  Kinetic modeling of liquid-phase adsorption of reactive dyes and metal ions on chitosan. , 2001, Water research.

[26]  R. Santelli,et al.  Spectrophotometric determination of carbaryl by on-line elution after its preconcentration onto polyurethane foam. , 2000, Talanta.

[27]  Munir Ahmed,et al.  Adsorption Isotherms and Thermodynamic Profile of Co(II)—SCN Complex Uptake on Polyurethane Foam , 2000 .

[28]  R. Santelli,et al.  Retention of carbaryl by polyether type polyurethane foam: a critical study , 2000 .

[29]  M. El-Shahawi.  Retention profiles of some commercial pesticides, pyrethroid and acaricide residues and their application to tomato and parsley plants. , 1997, Journal of chromatography. A.

[30]  A. Proctor,et al.  The Freundlich isotherm in studying adsorption in oil processing , 1996 .

[31]  S. J. Culp,et al.  Malachite Green: A Toxicological Review , 1996 .

[32]  M. El-Shahawi,et al.  Preconcentration and separation of acaricides by polyether based polyurethane foam , 1996 .

[33]  M. El-Shahawi,et al.  The retention behaviour and separation of some water-soluble organophosphorus insecticides on polyester-based polyurethane foams. , 1995, Talanta.

[34]  H. Rathore,et al.  Solid-Phase Preconcentration and Spectrophotometric Determination of Carbaryl Traces in Water , 1995 .

[35]  M. El-Shahawi.  Preconcentration and separation of some organic water pollutants with polyurethane foam and activated carbon , 1993 .

[36]  A. Chow,et al.  Extraction of aromatic acids and phenols by polyurethane foam. , 1992, Talanta.

[37]  A. Chow,et al.  Extraction of aromatic organic compounds by polyurethane foam. , 1987, Talanta.

[38]  M. El-Shahawi,et al.  Collection and separation of some organic insecticides on polyurethane foam columns , 1986 .

[39]  T. Braun,et al.  Polyurethane foam sorbents in separation science , 1985 .

[40]  G. Mckay,et al.  Principles of dye removal from textile effluent , 1980 .

[41]  H. Bowen.  Absorption by polyurethane foams; new method of separation , 1970 .