A High-Stress Liner Comprising Diamond-Like Carbon (DLC) for Strained p-Channel MOSFET

We report the integration of a new liner stressor comprising diamond-like carbon (DLC) film over a p-channel transistor. A high compressive stress of 6.5 GPa was achieved in a high-stress film with a thickness of 27 nm. A 74% enhancement in drive current was observed for the strained device with DLC liner as compared to a control device without DLC liner. Due to its much higher intrinsic stress value compared to conventional SiN films, a thinner DLC layer can induce comparable amount of stress in the transistor channel compared to a thicker SiN. The DLC material is a potential next-generation high-stress and low-permittivity liner stressor material suitable for application in transistors with aggressively scaled pitch dimensions.

[1]  S. Narasimha,et al.  Stress dependence and poly-pitch scaling characteristics of (110) PMOS drive current , 2007, 2007 IEEE Symposium on VLSI Technology.

[2]  Yee-Chia Yeo,et al.  Strained N-Channel FinFETs with 25 nm Gate Length and Silicon-Carbon Source/Drain Regions for Performance Enhancement , 2006, 2006 Symposium on VLSI Technology, 2006. Digest of Technical Papers..

[3]  V. Moroz,et al.  pMOSFET with 200% mobility enhancement induced by multiple stressors , 2006, IEEE Electron Device Letters.

[4]  S. Thompson,et al.  Uniaxial-process-induced strained-Si: extending the CMOS roadmap , 2006, IEEE Transactions on Electron Devices.

[5]  K. Yahashi,et al.  High performance CMOSFET technology for 45nm generation and scalability of stress-induced mobility enhancement technique , 2006, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[6]  S. Tyagi,et al.  High performance 35nm L/sub GATE/ CMOS transistors featuring NiSi metal gate (FUSI), uniaxial strained silicon channels and 1.2nm gate oxide , 2005, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[7]  S. Satoh,et al.  A novel strain enhanced CMOS architecture using selectively deposited high tensile and high compressive silicon nitride films , 2004, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..

[8]  C.C. Chen,et al.  Stress memorization technique (SMT) by selectively strained-nitride capping for sub-65nm high-performance strained-Si device application , 2004, Digest of Technical Papers. 2004 Symposium on VLSI Technology, 2004..

[9]  Ronaldo Domingues Mansano,et al.  Plasma etching of DLC films for microfluidic channels , 2003, Microelectron. J..

[10]  Beng Kang Tay,et al.  Effect of film thickness on the stress and adhesion of diamond-like carbon coatings , 2002 .

[11]  M. Chhowalla.  Thick, well-adhered, highly stressed tetrahedral amorphous carbon , 2001 .

[12]  K. Hirakuri,et al.  Application of diamond-like carbon films to the integrated circuit fabrication process , 1999 .

[13]  Mohamed Chaker,et al.  Direct evaluation of the sp3 content in diamond-like-carbon films by XPS , 1998 .

[14]  B. Tay,et al.  Properties of carbon ion deposited tetrahedral amorphous carbon films as a function of ion energy , 1996 .