A dual-mode direct-conversion CMOS transceiver for Bluetooth and 802.11b

A dual-mode direct-conversion transceiver integrates the transmitter of 0dBm output power and the receiver for both Bluetooth with -87dBm sensitivity and 802.11b with -86dBm sensitivity in a single chip with all building blocks shared for low cost and low power solution. Fabricated in 0.25/spl mu/m CMOS process, die size is 8.4mm/sup 2/ including pads and current consumption in RX is 50 mA for Bluetooth and 65mA for 802.11b.

[1]  Deog-Kyoon Jeong,et al.  A fully-integrated CMOS frequency synthesizer with charge-averaging charge pump and dual-path loop filter for PCS- and cellular-CDMA wireless systems , 2001, 2001 Symposium on VLSI Circuits. Digest of Technical Papers (IEEE Cat. No.01CH37185).

[2]  Deog-Kyoon Jeong,et al.  Full-CMOS 2-GHz WCDMA direct conversion transmitter and receiver , 2003 .

[3]  K. Halonen,et al.  A 2.7V CMOS dual-mode baseband filter for PDC and WCDMA , 2000, Proceedings of the 26th European Solid-State Circuits Conference.

[4]  Chun-Huat Heng,et al.  A 2.4GHz dual-mode 0.18/spl mu/m CMOS transceiver for Bluetooth and 802.11b , 2003, 2003 IEEE International Solid-State Circuits Conference, 2003. Digest of Technical Papers. ISSCC..

[5]  Deog-Kyoon Jeong,et al.  A single-chip 2.4 GHz direct-conversion CMOS transceiver with GFSK modem for Bluetooth application , 2001, 2001 Symposium on VLSI Circuits. Digest of Technical Papers (IEEE Cat. No.01CH37185).

[6]  Shan Jiang,et al.  A dual mode 802.11b/Bluetooth radio in 0.35μm CMOS , 2003 .

[7]  Ramesh Harjani,et al.  DC-coupled IF stage design for a 900-MHz ISM receiver , 2003 .