In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration

Hybrid photonic integration combines complementary advantages of different material platforms, offering superior performance and flexibility compared with monolithic approaches. This applies in particular to multi-chip concepts, where components can be individually optimized and tested. The assembly of such systems, however, requires expensive high-precision alignment and adaptation of optical mode profiles. We show that these challenges can be overcome by in situ printing of facet-attached beam-shaping elements. Our approach allows precise adaptation of vastly dissimilar mode profiles and permits alignment tolerances compatible with cost-efficient passive assembly techniques. We demonstrate a selection of beam-shaping elements at chip and fibre facets, achieving coupling efficiencies of up to 88% between edge-emitting lasers and single-mode fibres. We also realize printed free-form mirrors that simultaneously adapt beam shape and propagation direction, and we explore multi-lens systems for beam expansion. The concept paves the way to automated assembly of photonic multi-chip systems with unprecedented performance and versatility.By exploiting two-photon laser lithography for in situ printing of facet-attached beam-shaping elements, hybrid photonic integration can now be realized, opening opportunities for the automated assembly of photonic multi-chip systems with unprecedented performance and versatility.

[1]  Mingbin Yu,et al.  Silicon photonics packaging with lateral fiber coupling to apodized grating coupler embedded circuit. , 2014, Optics express.

[2]  Wood-Hi Cheng,et al.  A new scheme of conical-wedge-shaped fiber endface for coupling between high-power laser diodes and single-mode fibers , 2005 .

[3]  Wolfgang Freude,et al.  Optical coherence tomography system mass-producible on a silicon photonic chip. , 2016, Optics express.

[4]  Francesco Gentile,et al.  Optical micro-structures fabricated on top of optical fibers by means of two-photon photopolymerization , 2010 .

[5]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.

[6]  H. Giessen,et al.  Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres , 2016, Nature Communications.

[7]  P. Wasylczyk,et al.  Microstructured gradient-index antireflective coating fabricated on a fiber tip with direct laser writing. , 2014, Optics express.

[8]  W. Hofmann,et al.  InP-Based Long-Wavelength VCSELs and VCSEL Arrays , 2009, IEEE Journal of Selected Topics in Quantum Electronics.

[9]  Peter O'Brien,et al.  Hybrid Integration of the Wavelength-Tunable Laser With a Silicon Photonic Integrated Circuit , 2013, Journal of Lightwave Technology.

[10]  R. Gadonas,et al.  Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization , 2010 .

[11]  Peter Ossieur,et al.  Optical and Electronic Packaging Processes for Silicon Photonic Systems , 2015, Journal of Lightwave Technology.

[12]  Michael B. Frish,et al.  Fabrication of silicon-on-insulator adiabatic tapers for low-loss optical interconnection of photonic devices , 2003, SPIE OPTO.

[13]  C. Dragone,et al.  Ideal microlenses for laser to fiber coupling , 1993 .

[14]  Akira Nakanishi,et al.  Cost-Effective Optical Sub-Assembly Using Lens-Integrated Surface-Emitting Laser , 2016, Journal of Lightwave Technology.

[15]  Xianshu Luo,et al.  Low Loss Fiber-to-Waveguide Converter With a 3-D Functional Taper for Silicon Photonics , 2016, IEEE Photonics Technology Letters.

[16]  Lee Carroll,et al.  Pluggable Single-Mode Fiber-Array-to-PIC Coupling Using Micro-Lenses , 2017, IEEE Photonics Technology Letters.

[17]  N. Grote,et al.  Ultra-low threshold 1490 nm surface-emitting BH-DFB laser diode with integrated monitor photodiode , 2010, 2010 22nd International Conference on Indium Phosphide and Related Materials (IPRM).

[18]  D. Taillaert,et al.  A compact two-dimensional grating coupler used as a polarization splitter , 2003, IEEE Photonics Technology Letters.

[19]  M. Wegener,et al.  Direct laser writing of three-dimensional photonic-crystal templates for telecommunications , 2004, Nature materials.

[20]  Sylvie Menezo,et al.  Meeting the Electrical, Optical, and Thermal Design Challenges of Photonic-Packaging , 2016, IEEE Journal of Selected Topics in Quantum Electronics.

[21]  Yongqi Fu,et al.  Integrated micro-cylindrical lens with laser diode for single-mode fiber coupling , 2000, IEEE Photonics Technology Letters.

[22]  R. Modavis,et al.  Anamorphic microlens for laser diode to single-mode fiber coupling , 1995, IEEE Photonics Technology Letters.

[23]  Thomas Schrans,et al.  High Performance MEMS-Based Micro-Optic Assembly for Multi-Lane Transceivers , 2014, Journal of Lightwave Technology.

[24]  Benjamin G Lee,et al.  Multichannel High-Bandwidth Coupling of Ultradense Silicon Photonic Waveguide Array to Standard-Pitch Fiber Array , 2011, Journal of Lightwave Technology.

[25]  N. Ngo,et al.  Low-cost and efficient coupling technique using reflowed sol-gel microlens. , 2003, Optics express.

[26]  R Orobtchouk,et al.  Silicon Photonic Circuits: On-CMOS Integration, Fiber Optical Coupling, and Packaging , 2011, IEEE Journal of Selected Topics in Quantum Electronics.

[27]  B. Corbett,et al.  Practical Design of Lensed Fibers for Semiconductor Laser Packaging Using Laser Welding Technique , 2009, Journal of Lightwave Technology.

[28]  C. Koos,et al.  Lenses for low-loss chip-to-fiber and fiber-to-fiber coupling fabricated by 3D direct-write lithography , 2016, 2016 Conference on Lasers and Electro-Optics (CLEO).

[29]  Li Qin,et al.  Beam shaping of edge-emitting diode lasers using a single double-axial hyperboloidal micro-lens. , 2013, Optics letters.

[30]  Dennis W. Prather,et al.  Myths and rumours of silicon photonics , 2012, Nature Photonics.

[31]  Harald Giessen,et al.  Two-photon direct laser writing of ultracompact multi-lens objectives , 2016, Nature Photonics.

[32]  Shoji Maruo,et al.  Three-dimensional microfabrication with two-photon absorbed photopolymerization , 1996, International Commission for Optics.

[33]  P. O'Brien,et al.  Packaging Process for Grating-Coupled Silicon Photonic Waveguides Using Angle-Polished Fibers , 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[34]  Harald Giessen,et al.  Ultra-compact on-chip LED collimation optics by 3D femtosecond direct laser writing. , 2016, Optics letters.

[35]  T. Krauss,et al.  An out-of-plane grating coupler for efficient butt-coupling between compact planar waveguides and single-mode fibers , 2002 .

[36]  Roger Dangel,et al.  Polymer waveguides for electro-optical integration in data centers and high-performance computers. , 2015, Optics express.

[37]  A. Leinse,et al.  TriPleX: a versatile dielectric photonic platform , 2015 .

[38]  R. Beyeler,et al.  Passive alignment of optical elements in a printed circuit board , 2006, 56th Electronic Components and Technology Conference 2006.

[39]  Ren Liu,et al.  Silyl-based initiators for two-photon polymerization: from facile synthesis to quantitative structure–activity relationship analysis , 2017 .