A mini-review of embedded 3D printing: supporting media and strategies.
暂无分享,去创建一个
[1] Sebastien G M Uzel,et al. Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels , 2019, Science Advances.
[2] TibbitsSkylar,et al. Large-Scale Rapid Liquid Printing , 2017 .
[3] Daniel De Kee,et al. Non-Newtonian fluids with a yield stress , 2005 .
[4] Bulbul Chakraborty,et al. The physics of jamming for granular materials: a review , 2018, Reports on progress in physics. Physical Society.
[5] Gilmer R. Burgos,et al. On the determination of yield surfaces in Herschel-Bulkley fluids , 1999 .
[6] Roberto Parra-Saldivar,et al. Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues , 2018, Advanced materials.
[7] P. Levitz,et al. Phase diagram of colloidal dispersions of anisotropic charged particles : equilibrium properties, structure, and rheology of laponite suspensions , 1995 .
[8] J. Burdick,et al. Hydrogel microparticles for biomedical applications , 2019, Nature Reviews Materials.
[9] R. Hayes,et al. Properties of Carbopol solutions as models for yield-stress fluids , 2002 .
[10] M. Gelinsky,et al. 3D printing of hydrogels: Rational design strategies and emerging biomedical applications , 2020 .
[11] Daniel M. Vogt,et al. Soft Somatosensitive Actuators via Embedded 3D Printing , 2018, Advanced materials.
[12] Ayse Z. Aroguz,et al. Alginate/Polyoxyethylene and Alginate/Gelatin Hydrogels: Preparation, Characterization, and Application in Tissue Engineering , 2014, Applied Biochemistry and Biotechnology.
[13] Koch,et al. A Study of the Temperature-Dependent Micellization of Pluronic F127. , 1999, Journal of colloid and interface science.
[14] Alex Liberzon,et al. Ieee Transactions on Instrumentation and Measurement 1 Long-duration Time-resolved Piv to Study Unsteady Aerodynamics , 2022 .
[15] Zhiyang Li,et al. Embedded 3D printing of multi-internal surfaces of hydrogels , 2020 .
[16] Thomas J. Hinton,et al. 3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding , 2016, ACS biomaterials science & engineering.
[17] Saad A. Khan,et al. Dynamic rheological behavior of flocculated fumed silica suspensions , 1993 .
[18] Hermann Seitz,et al. A review on 3D micro-additive manufacturing technologies , 2012, The International Journal of Advanced Manufacturing Technology.
[19] Michael A. Sutton,et al. Recent Advances and Perspectives in Digital Image Correlation , 2015 .
[20] Ashley M. Compaan,et al. Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects. , 2020, ACS applied materials & interfaces.
[21] M. Ganjali,et al. Poloxamer: A versatile tri-block copolymer for biomedical applications. , 2020, Acta biomaterialia.
[22] Howard A Stone,et al. Viscoplastic Matrix Materials for Embedded 3D Printing. , 2018, ACS applied materials & interfaces.
[23] Daniel M. Vogt,et al. Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing , 2015, Advanced materials.
[24] A. Boccaccini,et al. Oxidized Alginate-Based Hydrogels for Tissue Engineering Applications: A Review. , 2018, Biomacromolecules.
[25] Yu Shrike Zhang,et al. Embedded Multimaterial Extrusion Bioprinting , 2018, SLAS technology.
[26] Aleksandr Ovsianikov,et al. Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel , 2017 .
[27] J. Hyun,et al. Solid matrix-assisted printing for three-dimensional structuring of a viscoelastic medium surface , 2019, Nature Communications.
[28] T. Dvir,et al. 3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts , 2019, Advanced science.
[29] B. W. Barry,et al. The rheological properties of carbopol gels I. Continuous shear and creep properties of carbopol gels , 1979 .
[30] Robert J. Wood,et al. An integrated design and fabrication strategy for entirely soft, autonomous robots , 2016, Nature.
[31] A. Fernández-Nieves,et al. Stability of toroidal droplets inside yield stress materials. , 2014, Physical review. E, Statistical, nonlinear, and soft matter physics.
[32] Malcolm Xing,et al. 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances , 2018, Bioactive materials.
[33] Daniel M. Vogt,et al. Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.
[34] Akhilesh K Gaharwar,et al. 2D Nanoclay for Biomedical Applications: Regenerative Medicine, Therapeutic Delivery, and Additive Manufacturing , 2019, Advanced materials.
[35] Tapomoy Bhattacharjee,et al. Writing in the granular gel medium , 2015, Science Advances.
[36] W. Gregory Sawyer,et al. Self-assembled micro-organogels for 3D printing silicone structures , 2017, Science Advances.
[37] Su Ryon Shin,et al. Materials and technical innovations in 3D printing in biomedical applications. , 2020, Journal of materials chemistry. B.
[38] Joon Hyung Park,et al. Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels , 2015, Science Advances.
[39] Zhifeng Ren,et al. Flexible Electronics: Stretchable Electrodes and Their Future , 2018, Advanced Functional Materials.
[40] Kerry Heitmiller,et al. Rheologic properties of soft tissue fillers and implications for clinical use , 2020, Journal of cosmetic dermatology.
[41] J. Andrade,et al. On the rheology of dilative granular media: Bridging solid- and fluid-like behavior , 2012 .
[42] Charlie C. L. Wang,et al. The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..
[43] I. Olszewska-Czyż,et al. Biological molecules in dental applications: hyaluronic acid as a companion biomaterial for diverse dental applications , 2020, Heliyon.
[44] D. Mcclements,et al. Emulsions Stabilized by Inorganic Nanoclays and Surfactants: Stability, Viscosity, and Implications for Applications. , 2020, Inorganica chimica acta.
[45] C. Highley,et al. Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels , 2015, Advanced materials.
[46] Duli Yu,et al. Flexible and Stretchable Electronic Skin with High Durability and Shock Resistance via Embedded 3D Printing Technology for Human Activity Monitoring and Personal Healthcare , 2019, Advanced Materials Technologies.
[47] Ali Khademhosseini,et al. Direct 3D bioprinting of perfusable vascular constructs using a blend bioink. , 2016, Biomaterials.
[48] A. Khademhosseini,et al. Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs. , 2014, Lab on a chip.
[49] Qi Gao,et al. Review on development of volumetric particle image velocimetry , 2013 .
[50] J. Lewis,et al. Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.
[51] Yong Huang,et al. Functional Nanoclay Suspension for Printing-Then-Solidification of Liquid Materials. , 2017, ACS applied materials & interfaces.
[52] S. Park,et al. Rheological properties and microstructures of Carbopol gel network system , 2003 .
[53] Soojin Park,et al. Surface‐Embedded Stretchable Electrodes by Direct Printing and their Uses to Fabricate Ultrathin Vibration Sensors and Circuits for 3D Structures , 2017, Advanced materials.
[54] Jing Liu,et al. Suspension 3D Printing of Liquid Metal into Self‐Healing Hydrogel , 2017 .
[55] C. Highley,et al. Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels , 2018, Advanced Functional Materials.
[56] Katarzyna Rycerz,et al. Embedded 3D Printing of Novel Bespoke Soft Dosage Form Concept for Pediatrics , 2019, Pharmaceutics.
[57] Turbulent flows as generalized Kelvin–Voigt materials: Modeling and analysis , 2019, 1907.09191.
[58] Yong Huang,et al. Fabrication of Stand-Alone Cell-Laden Collagen Vascular Network Scaffolds Using Fugitive Pattern-Based Printing-Then-Casting Approach. , 2018, ACS applied materials & interfaces.
[59] Yong Huang,et al. Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures , 2016, Biofabrication.
[60] Kaidong Song,et al. Printing of Hydrophobic Materials in Fumed Silica Nanoparticle Suspension. , 2019, ACS applied materials & interfaces.
[61] Hao Zhang,et al. Hectorite: Synthesis, modification, assembly and applications , 2019, Applied Clay Science.
[62] T. Burghelea,et al. Thermorheological properties of a Carbopol gel under shear , 2012 .
[63] W. Gregory Sawyer,et al. Liquid-like Solids Support Cells in 3D. , 2016, ACS biomaterials science & engineering.
[64] Ashley M. Compaan,et al. Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air. , 2020, ACS applied materials & interfaces.
[65] Thomas J. Wallin,et al. 3D printing of soft robotic systems , 2018, Nature Reviews Materials.
[66] Mohammad Reza Khosravani,et al. 3D-printed sensors: Current progress and future challenges , 2020, Sensors and Actuators A: Physical.
[67] Behzad Zakani,et al. Rotational Rheometry of a Fumed Silica Lubricating Grease , 2020 .
[68] A. Kashani,et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.
[69] J. Lewis,et al. 3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.
[70] P. Coussot,et al. Yield stress fluid flows: A review of experimental data , 2014 .
[71] Jianzhong Fu,et al. All‐Printed Flexible and Stretchable Electronics with Pressing or Freezing Activatable Liquid‐Metal–Silicone Inks , 2019, Advanced Functional Materials.
[72] Anthony Atala,et al. 3D bioprinting of tissues and organs , 2014, Nature Biotechnology.
[73] T. Emrick,et al. Reconfigurable Printed Liquids , 2018, Advanced materials.
[74] Zhou Liu,et al. Freeform, Reconfigurable Embedded Printing of All‐Aqueous 3D Architectures , 2019, Advanced materials.
[75] M. Kawaguchi. Stability and rheological properties of silica suspensions in water- immiscible liquids. , 2020, Advances in colloid and interface science.
[76] Winslow H. Herschel,et al. Konsistenzmessungen von Gummi-Benzollösungen , 1926 .
[77] J. Lewis,et al. Omnidirectional Printing of 3D Microvascular Networks , 2011, Advanced materials.
[78] A. Khademhosseini,et al. Cell-laden microengineered gelatin methacrylate hydrogels. , 2010, Biomaterials.
[79] Junpeng Zhang,et al. Assessment of the characteristics and biocompatibility of gelatin sponge scaffolds prepared by various crosslinking methods , 2018, Scientific Reports.
[80] M. Balhoff,et al. Chemical and microstructural controls on viscoplasticity in Carbopol hydrogel , 2018 .
[81] Gioacchino Viggiani,et al. Multiscale modeling and characterization of granular matter: From grain kinematics to continuum mechanics , 2011 .
[82] L. Cai,et al. An unbounded approach to microfluidics using the Rayleigh–Plateau instability of viscous threads directly drawn in a bath , 2019, Proceedings of the National Academy of Sciences.
[83] Shige Wang,et al. Synthesis and biocompatibility of two-dimensional biomaterials , 2019 .
[84] Shannon E Bakarich,et al. 3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems , 2017, Advanced materials.
[85] P. G. Campbell,et al. 3D bioprinting of collagen to rebuild components of the human heart , 2019, Science.
[86] ChoiJin,et al. 4D Printing Technology: A Review , 2015 .
[87] Gina Olson,et al. Zero-Support 3D Printing of Thermoset Silicone Via Simultaneous Control of Both Reaction Kinetics and Transient Rheology , 2019, 3D Printing and Additive Manufacturing.
[88] Sanjay Tiwari,et al. Modified hyaluronic acid based materials for biomedical applications. , 2019, International journal of biological macromolecules.
[89] S. Magdassi,et al. Conductive nanomaterials for 2D and 3D printed flexible electronics. , 2019, Chemical Society reviews.
[90] P. Ifju,et al. Full-Field Deformation Measurements in Liquid-like-Solid Granular Microgel Using Digital Image Correlation , 2017 .