Wind Energy Systems

Wind power now represents a major and growing source of renewable energy. Large wind turbines (with capacities of up to 6–8 MW) are widely installed in power distribution networks. Increasing numbers of onshore and offshore wind farms, acting as power plants, are connected directly to power transmission networks at the scale of hundreds of megawatts. As its level of grid penetration has begun to increase dramatically, wind power is starting to have a significant impact on the operation of the modern grid system. Advanced power electronics technologies are being introduced to improve the characteristics of the wind turbines, and make them more suitable for integration into the power grid. Meanwhile, there are some emerging challenges that still need to be addressed. This paper provides an overview and discusses some trends in the power electronics technologies used for wind power generation. First, the state-of-the-art technology and global market are generally discussed. Several important wind turbine concepts are discussed, along with power electronics solutions either for individual wind turbines or for entire wind farms. Some technology challenges and future solutions for power electronics in wind turbine systems are also addressed.

[1]  Frede Blaabjerg,et al.  An overview of the reliability prediction related aspects of high power IGBTs in wind power applications , 2011, Microelectron. Reliab..

[2]  Johann W. Kolar,et al.  SiC versus Si—Evaluation of Potentials for Performance Improvement of Inverter and DC–DC Converter Systems by SiC Power Semiconductors , 2011, IEEE Transactions on Industrial Electronics.

[3]  R. Jakob,et al.  3-Level high power converter with press pack IGBT , 2007, 2007 European Conference on Power Electronics and Applications.

[4]  Dawei Xiang,et al.  An Industry-Based Survey of Reliability in Power Electronic Converters , 2011, IEEE Transactions on Industry Applications.

[5]  Rainer Marquardt,et al.  An innovative modular multilevel converter topology suitable for a wide power range , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.

[6]  F. Wittwer,et al.  Medium voltage converter for permanent magnet wind power generators up to 5 MW , 2005, 2005 European Conference on Power Electronics and Applications.

[7]  José R. Rodríguez,et al.  A Survey on Neutral-Point-Clamped Inverters , 2010, IEEE Transactions on Industrial Electronics.

[8]  Frede Blaabjerg,et al.  Comparison of Wind Power Converter Reliability With Low-Speed and Medium-Speed Permanent-Magnet Synchronous Generators , 2015, IEEE Transactions on Industrial Electronics.

[9]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[10]  Jon Clare,et al.  Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation , 1996 .

[11]  Frede Blaabjerg,et al.  Flexible Active Power Control of Distributed Power Generation Systems During Grid Faults , 2007, IEEE Transactions on Industrial Electronics.

[12]  Alfred Rufer,et al.  Uniflex-PM – a Key-Enabling Technology for Future European Electricity Networks , 2009 .

[13]  Mike Barnes,et al.  Power quality and stability improvement of a wind farm using STATCOM supported with hybrid battery energy storage , 2006 .

[14]  Tiefu Zhao,et al.  Design and Analysis of a 270kW Five-level DC/DC Converter for Solid State Transformer Using 10kV SiC Power Devices , 2007, 2007 IEEE Power Electronics Specialists Conference.

[15]  F. Wang,et al.  Dc-link voltage control of full power converter for wind generator operating in weak grid systems , 2009, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[16]  Ke Ma,et al.  The Impact of Power Switching Devices on the Thermal Performance of a 10 MW Wind Power NPC Converter , 2012 .

[17]  Uwe Scheuermann,et al.  Reliability challenges of automotive power electronics , 2009, Microelectron. Reliab..

[18]  Frede Blaabjerg,et al.  Review of Contemporary Wind Turbine Concepts and Their Market Penetration , 2004 .

[19]  Jon Are Suul,et al.  Low Voltage Ride Through of Wind Farms With Cage Generators: STATCOM Versus SVC , 2008, IEEE Transactions on Power Electronics.

[20]  M. Liserre,et al.  Design and control of an LCL-filter based three-phase active rectifier , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[21]  Poul Ejnar Sørensen,et al.  Modelling, Analysis and Control of DC-connected Wind Farms to Grid , 2006 .

[22]  B. Andresen,et al.  A high power density converter system for the Gamesa G10x 4,5 MW wind turbine , 2007, 2007 European Conference on Power Electronics and Applications.

[23]  Roberto Cárdenas,et al.  Overview of control systems for the operation of DFIGs in wind energy applications , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[24]  A Q Huang,et al.  The Future Renewable Electric Energy Delivery and Management (FREEDM) System: The Energy Internet , 2011, Proceedings of the IEEE.

[25]  H. Akagi,et al.  A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2007, IEEE Transactions on Power Electronics.

[26]  D. Santos-Martin,et al.  Providing Ride-Through Capability to a Doubly Fed Induction Generator Under Unbalanced Voltage Dips , 2009, IEEE Transactions on Power Electronics.

[27]  Rod Jones,et al.  Optimised power converter for multi-MW direct drive permanent magnet wind turbines , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[28]  M. Liserre,et al.  Reactive Power Control for Improving Wind Turbine System Behavior Under Grid Faults , 2009, IEEE Transactions on Power Electronics.

[29]  Li Ran,et al.  Control of a doubly fed induction generator in a wind turbine during grid fault ride-through , 2006, IEEE Transactions on Energy Conversion.

[30]  F. Blaabjerg,et al.  Rotor Voltage Dynamics in the Doubly Fed Induction Generator During Grid Faults , 2010, IEEE Transactions on Power Electronics.

[31]  R.W. De Doncker,et al.  Inverter design for hybrid electrical vehicles considering mission profiles , 2005, 2005 IEEE Vehicle Power and Propulsion Conference.

[32]  F. Blaabjerg,et al.  Power electronics as efficient interface in dispersed power generation systems , 2004, IEEE Transactions on Power Electronics.

[33]  Dehong Xu,et al.  Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults , 2016, IEEE Transactions on Power Electronics.

[34]  Rik W. De Doncker,et al.  Dynamic and Balanced Control of Three-Phase High-Power Dual-Active Bridge DC–DC Converters in DC-Grid Applications , 2013, IEEE Transactions on Power Electronics.

[35]  Kit Po Wong,et al.  Advanced Control Strategy of DFIG Wind Turbines for Power System Fault Ride Through , 2012, IEEE Transactions on Power Systems.

[36]  Marco Liserre,et al.  Overview of Multi-MW Wind Turbines and Wind Parks , 2011, IEEE Transactions on Industrial Electronics.

[37]  Sergio Busquets-Monge,et al.  Control Strategies Based on Symmetrical Components for Grid-Connected Converters Under Voltage Dips , 2009, IEEE Transactions on Industrial Electronics.

[38]  Peter Tavner,et al.  Control of a doubly fed induction generator in a wind turbine during grid fault ride-through , 2006 .

[39]  Seung-Ki Sul,et al.  A New Architecture for Offshore Wind Farms , 2008, IEEE Transactions on Power Electronics.

[40]  R. W. De Doncker,et al.  Doubly fed induction generator systems for wind turbines , 2002 .

[41]  Ke Ma.  Thermal " Loading " and " Lifetime " Estimation " for " Power " Device " Considering " Mission " Profiles " in " Wind " Power " Converter " , 2014 .

[42]  R.G. Harley,et al.  Real-Time Implementation of a STATCOM on a Wind Farm Equipped With Doubly Fed Induction Generators , 2006, IEEE Transactions on Industry Applications.

[43]  Stavros A. Papathanassiou,et al.  A review of grid code technical requirements for wind farms , 2009 .

[44]  Frede Blaabjerg,et al.  Future on Power Electronics for Wind Turbine Systems , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[45]  Zhe Chen,et al.  A Review of the State of the Art of Power Electronics for Wind Turbines , 2009, IEEE Transactions on Power Electronics.

[46]  Steffen Bernet,et al.  Comparison of press-pack IGBT at hard switching and clamp operation for medium voltage converters , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[47]  R Blasco-Gimenez,et al.  Distributed Voltage and Frequency Control of Offshore Wind Farms Connected With a Diode-Based HVdc Link , 2010, IEEE Transactions on Power Electronics.

[48]  S.M. Muyeen,et al.  A Variable Speed Wind Turbine Control Strategy to Meet Wind Farm Grid Code Requirements , 2010, IEEE Transactions on Power Systems.

[49]  M. Liserre,et al.  Power electronics converters for wind turbine systems , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[50]  Bin Wu,et al.  Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[51]  M. Liserre,et al.  Evaluation of Current Controllers for Distributed Power Generation Systems , 2009, IEEE Transactions on Power Electronics.

[52]  D. Boroyevich,et al.  DC-link Voltage Control of a Full Power Converter for Wind Generator Operating in Weak-Grid Systems , 2008, IEEE Transactions on Power Electronics.