Effects of operating and design parameters on the performance of a solid oxide fuel cell–gas turbine system

We present a steady-state thermodynamic model of a hybrid solid oxide fuel cell (SOFC)–gas turbine (GT) cycle developed using a commercial process simulation software, AspenPlus™. The hybrid cycle model incorporates a zero-dimensional macro-level SOFC model. A parametric study was carried out using the developed model to study the effects of system pressure, SOFC operating temperature, turbine inlet temperature, steam-to-carbon ratio, SOFC fuel utilization factor, and GT isentropic efficiency on the specific work output and efficiency of a generic hybrid cycle with and without anode recirculation. The results show that system pressure and SOFC operating temperature increase the cycle efficiency regardless of the presence of anode recirculation. On the other hand, the specific work decreases with operating temperature. Overall, the model can successfully capture the complex performance trends observed in hybrid cycles. Copyright © 2010 John Wiley & Sons, Ltd.

[1]  C Cunnel,et al.  Integration of solid oxide fuel cells into gas turbine power generation cycles. Part 2: Hybrid model for various integration schemes , 2002 .

[2]  Paola Costamagna,et al.  Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC) , 2004 .

[3]  Ali Volkan Akkaya,et al.  A study on performance of solid oxide fuel cell‐organic Rankine cycle combined system , 2009 .

[4]  Timo Kivisaari,et al.  The feasibility of a coal gasifier combined with a high-temperature fuel cell , 2004 .

[5]  I. Dincer,et al.  A review on macro‐level modeling of planar solid oxide fuel cells , 2008 .

[6]  Francesco Calise,et al.  Simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell (SOFC)–Gas Turbine System , 2006 .

[7]  F. Calise,et al.  Design and partial load exergy analysis of hybrid SOFC–GT power plant , 2006 .

[8]  I. Yasuda,et al.  3-D model calculation for planar SOFC , 2001 .

[9]  Jacob Brouwer,et al.  Development of a Solid-Oxide Fuel Cell/Gas Turbine Hybrid System Model for Aerospace Applications , 2004 .

[10]  I. Dincer,et al.  Performance comparison of two combined SOFC–gas turbine systems , 2007 .

[11]  Urmila M. Diwekar,et al.  Characterization and quantification of uncertainty in solid oxide fuel cell hybrid power plants , 2005 .

[12]  M. G. Pangalis,et al.  Integration of solid oxide fuel cells into gas turbine power generation cycles. Part 1: Fuel cell thermodynamic modelling , 2002 .

[13]  W. Winkler,et al.  The design of stationary and mobile solid oxide fuel cell–gas turbine systems , 2002 .

[14]  Atsushi Tsutsumi,et al.  Combinations of solid oxide fuel cell and several enhanced gas turbine cycles , 2003 .

[15]  Alberto Traverso,et al.  Modelling of Pressurised Hybrid Systems Based on Integrated Planar Solid Oxide Fuel Cell (IP‐SOFC) Technology , 2005 .

[16]  David Wallace,et al.  Integrated model framework for the evaluation of an SOFC/GT system as a centralized power source , 2004 .

[17]  H. Ho,et al.  Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant , 2002 .

[18]  Atsushi Tsutsumi,et al.  Energy recuperation in solid oxide fuel cell (SOFC) and gas turbine (GT) combined system , 2003 .

[19]  Ashok Rao,et al.  Analysis and optimization of a solid oxide fuel cell and intercooled gas turbine (SOFC-ICGT) hybrid cycle , 2004 .

[20]  D. A. Noren,et al.  Clarifying the Butler–Volmer equation and related approximations for calculating activation losses in solid oxide fuel cell models , 2005 .

[21]  Lars Sjunnesson,et al.  Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation , 2000 .