论文信息 - Design and optimization of the combination film in 10kW diode laser cladding source

Design and optimization of the combination film in 10kW diode laser cladding source

According to the special requirements of combination film in 10kW diode laser cladding source, the polarization combination film at 915nm was designed and grew. Film system is designed at different film materials based on the design theory. The non-QWOT film is optimized using the needle optimization and double sided coating by Optilayer software. The film was used in the 10kW diode laser source after high temperature aging testing. The film formed by Ta2O5 is very stable under IBAD, which can meet the reliability of 10kW diode laser cladding source in industry

Hongbo Zhu | Yongqiang Ning | Xingchen Lin | Ming-ming Hao | Jin-sheng Zhang

[1] Gorachand Ghosh,et al. Dispersion-equation coefficients for the refractive index and birefringence of calcite and quartz crystals , 1999 .

[2] Frank Gaebler,et al. The use of novel, direct diode lasers for large area hard-facing and high deposition rate cladding to enhance surface wear and corrosion resistance , 2012, LASE.

[3] Veit Bluemel,et al. 2-kW cw fiber-coupled diode laser system , 2000, Advanced High-Power Lasers and Applications.

[4] Martin Traub,et al. 100 W/100 μm passively cooled fiber coupled diode laser at 976 nm based on multiple 100 μm single emitters , 2009, LASE.

[5] M. Lequime,et al. Exploitation of multiple incidences spectrometric measurements for thin film reverse engineering. , 2012, Optics express.

[6] Silke Pflueger,et al. A 15-kW fiber-coupled diode laser for pumping applications , 2012, Photonics West - Lasers and Applications in Science and Engineering.