Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications

This article presents an overview on typical properties, technologies, and applications of liquid metal based flexible printed electronics. The core manufacturing material—room-temperature liquid metal, currently mainly represented by gallium and its alloys with the properties of excellent resistivity, enormous bendability, low adhesion, and large surface tension, was focused on in particular. In addition, a series of recently developed printing technologies spanning from personal electronic circuit printing (direct painting or writing, mechanical system printing, mask layer based printing, high-resolution nanoimprinting, etc.) to 3D room temperature liquid metal printing is comprehensively reviewed. Applications of these planar or three-dimensional printing technologies and the related liquid metal alloy inks in making flexible electronics, such as electronical components, health care sensors, and other functional devices were discussed. The significantly different adhesions of liquid metal inks on various substrates under different oxidation degrees, weakness of circuits, difficulty of fabricating high-accuracy devices, and low rate of good product—all of which are challenges faced by current liquid metal flexible printed electronics—are discussed. Prospects for liquid metal flexible printed electronics to develop ending user electronics and more extensive applications in the future are given.

[1]  Rebecca K. Kramer,et al.  Mechanically Sintered Gallium–Indium Nanoparticles , 2015, Advanced materials.

[2]  Zhong Lin Wang,et al.  A universal self-charging system driven by random biomechanical energy for sustainable operation of mobile electronics , 2015, Nature Communications.

[3]  Stephanie Thalberg,et al.  Flexible Flat Panel Displays , 2016 .

[4]  Jing Liu,et al.  Liquid-solid phase transition alloy as reversible and rapid molding bone cement. , 2013, Biomaterials.

[5]  Wang Le.  Research Advancement of Liquid Metal Printed Electronics Ink , 2014 .

[6]  Liang Dong,et al.  Light-emitting coaxial nanofibers. , 2012, ACS nano.

[7]  Jin-A Jeong,et al.  Characteristics of inkjet-printed nano indium tin oxide particles for transparent conducting electrodes , 2010 .

[8]  Zhigang Wu,et al.  Microfluidic electronics. , 2012, Lab on a chip.

[9]  Carmel Majidi,et al.  Liquid-phase gallium-indium alloy electronics with microcontact printing. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[10]  Yewang Su,et al.  Mechanics of Epidermal Electronics , 2012 .

[11]  Jun Li,et al.  Electrical stimulation towards melanoma therapy via liquid metal printed electronics on skin , 2016, Clinical and Translational Medicine.

[12]  He Tian,et al.  A spectrally tunable all-graphene-based flexible field-effect light-emitting device , 2015, Nature Communications.

[13]  Yi Zheng,et al.  Pervasive liquid metal based direct writing electronics with roller-ball pen , 2013 .

[14]  Yonggang Huang,et al.  Stretchable and Foldable Silicon Integrated Circuits , 2008, Science.

[15]  Dong-Weon Lee,et al.  Recovery of nonwetting characteristics by surface modification of gallium-based liquid metal droplets using hydrochloric acid vapor. , 2013, ACS applied materials & interfaces.

[16]  L. Christophorou.  Science , 2018, Emerging Dynamics: Science, Energy, Society and Values.

[17]  J. Lewis,et al.  Pen‐on‐Paper Flexible Electronics , 2011, Advanced materials.

[18]  Rebecca K. Kramer,et al.  Effect of microtextured surface topography on the wetting behavior of eutectic gallium-indium alloys. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[19]  Jing Liu,et al.  Liquid phase 3D printing for quickly manufacturing conductive metal objects with low melting point alloy ink , 2014, Science China Technological Sciences.

[20]  Jie Xu,et al.  Recent Advancements in Functionalized Paper-Based Electronics. , 2016, ACS applied materials & interfaces.

[21]  P. Madden,et al.  Development and modeling of conducting polymer actuators and the fabrication of a conducting polymer based feedback loop , 2003 .

[22]  Yonggang Huang,et al.  Biaxially stretchable "wavy" silicon nanomembranes. , 2007, Nano letters.

[23]  Jing Liu,et al.  Flexible Mechanical Joint as Human Exoskeleton Using Low-Melting-Point Alloy , 2014 .

[24]  Benjamin C. K. Tee,et al.  An electrically and mechanically self-healing composite with pressure- and flexion-sensitive properties for electronic skin applications. , 2012, Nature nanotechnology.

[25]  Dong-Weon Lee,et al.  Hydrochloric acid-impregnated paper for gallium-based liquid metal microfluidics , 2015 .

[26]  Zhen Gu,et al.  Transformable liquid-metal nanomedicine , 2015, Nature Communications.

[27]  Jing Liu,et al.  Injectable 3-D Fabrication of Medical Electronics at the Target Biological Tissues , 2013, Scientific Reports.

[28]  A. Salleo,et al.  Flexible Electronics: Materials and Applications , 2009 .

[29]  M. Kaltenbrunner,et al.  Mechanically Adaptive Organic Transistors for Implantable Electronics , 2014, Advanced materials.

[30]  P. Švec,et al.  Electrical conductivity and viscosity of liquid Sn–Sb–Cu alloys , 2011 .

[31]  Yei Hwan Jung,et al.  Stretchable silicon nanoribbon electronics for skin prosthesis , 2014, Nature Communications.

[32]  Yi Zheng,et al.  Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism , 2014, Scientific Reports.

[33]  Cangran Guo,et al.  Rapidly patterning conductive components on skin substrates as physiological testing devices via liquid metal spraying and pre-designed mask. , 2014, Journal of materials chemistry. B.

[34]  Klas Hjort,et al.  Microfluidic Stretchable Radio-Frequency Devices , 2015, Proceedings of the IEEE.

[35]  J. Muth,et al.  3D Printing of Free Standing Liquid Metal Microstructures , 2013, Advanced materials.

[36]  Raeed H. Chowdhury,et al.  Epidermal Electronics , 2011, Science.

[37]  Xuan Wu,et al.  A galinstan-based inkjet printing system for highly stretchable electronics with self-healing capability. , 2016, Lab on a chip.

[38]  Michael D. McGehee,et al.  Polymer-based solar cells , 2007 .

[39]  Shanliangzi Liu,et al.  Different shades of oxide: from nanoscale wetting mechanisms to contact printing of gallium-based liquid metals. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[40]  Z. Cui,et al.  Printed Electronics: Materials, Technologies and Applications , 2016 .

[41]  Rebecca K. Kramer,et al.  Direct Writing of Gallium‐Indium Alloy for Stretchable Electronics , 2014 .

[42]  Jing Liu,et al.  Printable tiny thermocouple by liquid metal gallium and its matching metal , 2012 .

[43]  YongAn Huang,et al.  Inkjet printing for flexible electronics: Materials, processes and equipments , 2010 .

[44]  Michael D. Dickey,et al.  Ionic Current Rectification in Soft‐Matter Diodes with Liquid‐Metal Electrodes , 2012 .

[45]  A. Chiolerio,et al.  Silver nanoparticle ink technology: state of the art , 2016, Nanotechnology, science and applications.

[46]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[47]  Jing Liu,et al.  Atomized spraying of liquid metal droplets on desired substrate surfaces as a generalized way for ubiquitous printed electronics , 2014 .

[48]  Fan Yang,et al.  In Vivo Self-Powered Wireless Cardiac Monitoring via Implantable Triboelectric Nanogenerator. , 2016, ACS nano.

[49]  Y. Loh,et al.  Thermal conductivity of a granular metal. , 2006, Physical review letters.

[50]  Rebecca K. Kramer,et al.  Masked Deposition of Gallium‐Indium Alloys for Liquid‐Embedded Elastomer Conductors , 2013 .

[51]  C. Furmidge,et al.  Studies at phase interfaces. I. The sliding of liquid drops on solid surfaces and a theory for spray retention , 1962 .

[52]  Chanseok Lee,et al.  Ultrasensitive mechanical crack-based sensor inspired by the spider sensory system , 2014, Nature.

[53]  T. Emrick,et al.  Self-assembly of gold nanoparticles on gallium droplets: controlling charge transport through microscopic devices. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[54]  Viktor Malyarchuk,et al.  Paraboloid electronic eye cameras using deformable arrays of photodetectors in hexagonal mesh layouts , 2010 .

[55]  Zhong Lin Wang,et al.  Recent Progress in Electronic Skin , 2015, Advanced science.

[56]  Yi Zheng,et al.  Direct Desktop Printed-Circuits-on-Paper Flexible Electronics , 2013, Scientific Reports.

[57]  Jing Liu,et al.  Liquid metal as reconnection agent for peripheral nerve injury , 2016 .

[58]  G. Whitesides,et al.  Stretchable Microfluidic Radiofrequency Antennas , 2010, Advanced materials.

[59]  Zhigang Wu,et al.  A Microfluidic, Reversibly Stretchable, Large‐Area Wireless Strain Sensor , 2011 .

[60]  Alessandro Chiolerio,et al.  Wearable Electronics and Smart Textiles: A Critical Review , 2014, Sensors.

[61]  Qin Xu,et al.  Effect of oxidation on the mechanical properties of liquid gallium and eutectic gallium-indium , 2012, 1201.4828.

[62]  Rebecca K. Kramer,et al.  Hyperelastic pressure sensing with a liquid-embedded elastomer , 2010 .

[63]  T. Someya,et al.  Conformable, flexible, large-area networks of pressure and thermal sensors with organic transistor active matrixes. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[64]  Alessandro Chiolerio,et al.  Resistive hysteresis in flexible nanocomposites and colloidal suspensions: interfacial coupling mechanism unveiled , 2016 .

[65]  W. Choi,et al.  Gallium-based liquid metal inkjet printing , 2014, 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS).

[66]  G. Jabbour,et al.  Inkjet Printing—Process and Its Applications , 2010, Advanced materials.

[67]  Stephen A. Morin,et al.  Stretchable Conductive Composites Based on Metal Wools for Use as Electrical Vias in Soft Devices , 2015 .

[68]  Esa Kunnari,et al.  Environmental evaluation of new technology: printed electronics case study , 2009 .

[69]  Junhong Park,et al.  Stretchable Loudspeaker using Liquid Metal Microchannel , 2015, Scientific Reports.

[70]  Carmel Majidi,et al.  Soft-matter capacitors and inductors for hyperelastic strain sensing and stretchable electronics , 2013 .

[71]  Alessandro Chiolerio,et al.  Spin-coated silver nanocomposite resistive switching devices , 2017 .

[72]  Benjamin C. K. Tee,et al.  Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring , 2013, Nature Communications.

[73]  T. Krupenkin,et al.  Reverse electrowetting as a new approach to high-power energy harvesting , 2011, Nature communications.

[74]  Zhong Lin Wang,et al.  Dynamic Pressure Mapping of Personalized Handwriting by a Flexible Sensor Matrix Based on the Mechanoluminescence Process , 2015, Advanced materials.

[75]  Q. Wang,et al.  Fast Fabrication of Flexible Functional Circuits Based on Liquid Metal Dual‐Trans Printing , 2015, Advanced materials.

[76]  Jing Liu,et al.  Printing low-melting-point alloy ink to directly make a solidified circuit or functional device with a heating pen , 2014, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[77]  Giyoong Tae,et al.  Efficient Polymer Solar Cells Fabricated by Simple Brush Painting , 2007 .

[78]  Jing Liu,et al.  Biomedical Implementation of Liquid Metal Ink as Drawable ECG Electrode and Skin Circuit , 2013, PloS one.

[79]  Carmel Majidi,et al.  High‐Density Soft‐Matter Electronics with Micron‐Scale Line Width , 2014, Advanced materials.

[80]  Jing Liu,et al.  Ultra-compliant liquid metal electrodes with in-plane self-healing capability for dielectric elastomer actuators , 2013 .

[81]  Changqing Liu,et al.  Optimization of inkjet printed PEDOT:PSS thin films through annealing processes , 2012 .

[82]  M. Caironi,et al.  Synthesis of polyaniline-based inks for inkjet printed devices: electrical characterization highlighting the effect of primary and secondary doping , 2015 .

[83]  Yonggang Huang,et al.  Epidermal devices for noninvasive, precise, and continuous mapping of macrovascular and microvascular blood flow , 2015, Science Advances.

[84]  A. A. Bessonov,et al.  Nickel and copper conductive patterns fabricated by reactive inkjet printing combined with electroless plating , 2014 .

[85]  Klas Hjort,et al.  Tape Transfer Printing of a Liquid Metal Alloy for Stretchable RF Electronics , 2014, Sensors.

[86]  Ran Liu,et al.  Development of three-dimension microelectrode array for bioelectric measurement using the liquidmetal-micromolding technique , 2013 .

[87]  Allister F. McGuire,et al.  A skin-inspired organic digital mechanoreceptor , 2015, Science.

[88]  Jing Liu,et al.  Liquid Metal Angiography for Mega Contrast X-Ray Visualization of Vascular Network in Reconstructing In-Vitro Organ Anatomy , 2013, IEEE Transactions on Biomedical Engineering.

[89]  Carmel Majidi,et al.  3D structures of liquid-phase GaIn alloy embedded in PDMS with freeze casting. , 2013, Lab on a chip.

[90]  Benjamin C. K. Tee,et al.  25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress , 2013, Advanced materials.

[91]  Jing Liu,et al.  Liquid-Metal-Painted Stretchable Capacitor Sensors for Wearable Healthcare Electronics , 2016 .

[92]  Jin Jang,et al.  Displays develop a new flexibility , 2006 .

[93]  M. Schrader,et al.  Young-Dupre Revisited , 1995 .

[94]  Keon Jae Lee,et al.  Bendable inorganic thin-film battery for fully flexible electronic systems. , 2012, Nano letters.

[95]  Jing Liu,et al.  Ink Spraying Based Liquid Metal Printed Electronics for Directly Making Smart Home Appliances , 2015 .

[96]  James P. Wissman,et al.  Rapid Prototyping for Soft‐Matter Electronics , 2014 .

[97]  Jing Liu,et al.  Pressured liquid metal screen printing for rapid manufacture of high resolution electronic patterns , 2015 .

[98]  Mitesh Parmar,et al.  PDMS based coplanar microfluidic channels for the surface reduction of oxidized Galinstan. , 2014, Lab on a chip.

[99]  S. Bianco,et al.  Morphology and magnetic properties of island-like Co and Ni films obtained by de-wetting , 2011 .

[100]  Robert H. Reuss,et al.  Macroelectronics: Perspectives on Technology and Applications , 2005, Proceedings of the IEEE.

[101]  Ryosuke Matsuzaki,et al.  Highly Stretchable, Global, and Distributed Local Strain Sensing Line Using GaInSn Electrodes for Wearable Electronics , 2015 .

[102]  Dipankar Ghosh,et al.  Hybrid Dielectric Thin Films on Flexible Substrates for Embedded Capacitor Applications , 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[103]  Arnan Mitchell,et al.  Liquid Metal Marbles , 2013 .

[104]  Jun Yang,et al.  Direct printing and assembly of FM radio at the user end via liquid metal printer , 2014 .

[105]  Qin Zhang,et al.  Direct writing of electronics based on alloy and metal (DREAM) ink: A newly emerging area and its impact on energy, environment and health sciences , 2012 .

[106]  Jing Liu,et al.  Liquid Metal as Connecting or Functional Recovery Channel for the Transected Sciatic Nerve , 2014, 1404.5931.

[107]  Jing Liu,et al.  Compatible hybrid 3D printing of metal and nonmetal inks for direct manufacture of end functional devices , 2014 .

[108]  Magnus Jobs,et al.  Liquid alloy printing of microfluidic stretchable electronics. , 2012, Lab on a chip.

[109]  Klas Hjort,et al.  Tape Transfer Atomization Patterning of Liquid Alloys for Microfluidic Stretchable Wireless Power Transfer , 2015, Scientific Reports.

[110]  V. R. Raju,et al.  Paper-like electronic displays: Large-area rubber-stamped plastic sheets of electronics and microencapsulated electrophoretic inks , 2001, Proceedings of the National Academy of Sciences of the United States of America.

[111]  Jing Liu,et al.  Direct Writing of Flexible Electronics through Room Temperature Liquid Metal Ink , 2012, PloS one.