In situ fabrication and properties of 0.4MoB-0.1SiC-xMoSi2 composites by self-propagating synthesis and hot-press sintering

[1]  Xiaohong Wang,et al.  Synthesis, microstructure and mechanical properties of (Mo,Ti)Si2/Al2O3 composites prepared by thermite-reaction-assisted combustion synthesis , 2016 .

[2]  K. Hagihara,et al.  Microstructure and fracture toughness in boron added NbSi2(C40)/MoSi2(C11b) duplex crystals , 2016 .

[3]  Hejun Li,et al.  Design of an inlaid interface structure to improve the oxidation protective ability of SiC–MoSi2–ZrB2 coating for C/C composites , 2016 .

[4]  Houan Zhang,et al.  Effect of Si3N4 content on microstructures and antioxidant properties of MoSi2/Si3N4 composite coatings on Mo substrate , 2015 .

[5]  Mehdi Shahedi Asl,et al.  Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure , 2015 .

[6]  K. Sairam,et al.  Hot-pressing of MoSi2 reinforced B4C composites , 2014 .

[7]  Du Lihui,et al.  OXIDATION BEHAVIOR OF IN SITU SYNTHESIZED MoSi2-SiC COMPOSITES AT 500 degrees C , 2013 .

[8]  Zhi Wang,et al.  Effect of SiC whiskers on microstructure and mechanical properties of the MoSi2–SiCw composites , 2013 .

[9]  Kunming Pan,et al.  Fracture toughness and fracture mechanisms in Mo5SiB2 at ambient to elevated temperatures , 2013 .

[10]  E. Burresi,et al.  Mechanical properties and oxidation behavior of silicon carbide–molybdenum silicides composites , 2013 .

[11]  P. Li,et al.  Dielectric and Mechanical Properties of MoSi2/Al2O3 Composites Prepared by Hot Pressing , 2010 .

[12]  J. Perepezko.  The Hotter the Engine, the Better , 2009, Science.

[13]  A. Umarji,et al.  Improved ductility and oxidation resistance in Nb and Al co-substituted MoSi2 , 2008 .

[14]  Yicheng Ge,et al.  Reactive Hot Pressing of SiC/MoSi2 Nanocomposites , 2007 .

[15]  C. Yeh,et al.  Preparation of MoB and MoB–MoSi2 composites by combustion synthesis in SHS mode , 2007 .

[16]  S. Guo,et al.  Thermal and Electric Properties in Hot‐Pressed ZrB2–MoSi2–SiC Composites , 2007 .

[17]  S. Bugliosi,et al.  Effects of different BN grades on the machinability of Si3N4–MoSi2–BN composites , 2007 .

[18]  D. Sciti,et al.  Microstructure and mechanical properties of ZrB2–MoSi2 ceramic composites produced by different sintering techniques , 2006 .

[19]  R. Mitra.  Mechanical behaviour and oxidation resistance of structural silicides , 2006 .

[20]  E. Ström,et al.  Microstructure and properties stability of Al-alloyed MoSi2 matrix composites , 2004 .

[21]  Ming Qiu Zhang,et al.  Epoxy nanocomposites with high mechanical and tribological performance , 2003 .

[22]  J. A. Sekhar,et al.  Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides , 2003 .

[23]  W. Fang,et al.  Effect of Mg addition on the microstructure and mechanical properties of MoSi2 alloys , 2002 .

[24]  Sporn,et al.  Ceramic fibers for matrix composites in high-temperature engine applications , 1999, Science.

[25]  W. Lengauer,et al.  Multiphase reaction diffusion in transition metal-boron systems , 1997 .

[26]  Y. Mahajan,et al.  Processing-microstructure-property relationships in reaction hot-pressed MoSi2 and MoSi2/SiCp composites , 1997 .

[27]  M. Kaufman,et al.  Applications of in situ reactions to MoSi2-based materials , 1995 .

[28]  R. Abbaschian,et al.  Toughening MoSi2 with niobiúm metal—effects of morphology of ductile reinforcements , 1995 .

[29]  T. Langdon,et al.  The toughening and strengthening of ceramic materials through discontinuous reinforcement , 1994 .

[30]  R. Ritchie,et al.  Strength, fracture, and fatigue behavior of advanced high-temperature intermetallics reinforced with ductile phases , 1993 .

[31]  J. Petrovic,et al.  Hardness and Fracture Toughness of SiC‐Particle‐Reinforced MoSi2 Composites , 1991 .

[32]  John J. Petrovic,et al.  Feasibility of a Composite of Sic Whiskers in an MoSi2 Matrix , 1985 .

[33]  A. Shan,et al.  Tailoring the microstructure of molybdenum disilicide matrix composites with Nb additions , 2004 .

[34]  H. Inui,et al.  High-temperature structural intermetallics , 2000 .

[35]  M. Kaufman,et al.  Synthesis of MoSi2-boride composites through in situ displacement reactions , 1997 .

[36]  John J. Moore,et al.  Combustion synthesis of advanced materials: Part I. Reaction parameters , 1995 .