Preparation and enhanced wear resistance of HVAF-sprayed Fe-TiB2 cermet coating reinforced by carbon nanotubes

[1]  Hui-di Zhou,et al.  Preparation and vacuum tribological properties of composite coatings fabricated by effective introduction of soft metal Ag into spray-formed YSZ templates , 2020 .

[2]  Anilesh Kumar,et al.  Multi-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying , 2020 .

[3]  M. Gee,et al.  Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder , 2020 .

[4]  Jihua Huang,et al.  Microstructure evolution and mechanical properties of in-situ bimodal TiC-Fe coatings prepared by reactive plasma spraying , 2019, Ceramics International.

[5]  Jianqiang Wang,et al.  Differences in dry sliding wear behavior between HVAF-sprayed amorphous steel and crystalline stainless steel coatings , 2019, Journal of Materials Science & Technology.

[6]  Xifeng Yan,et al.  Corrosion resistance enhancement of WC cermet coating by carbides alloying , 2019, Corrosion Science.

[7]  A. Colella,et al.  Properties of HVOF-sprayed TiC-FeCrAl coatings , 2019, Wear.

[8]  Rahul Kumar,et al.  Fe-based amorphous/nanocrystalline composite coating by plasma spraying: Effect of heat input on morphology, phase evolution and mechanical properties , 2019, Journal of Alloys and Compounds.

[9]  S. Paul,et al.  Carbon nanotube reinforced HVOF sprayed WC-Co coating , 2018, Materials & Design.

[10]  S. Zhang,et al.  Phase evolution and wear resistance of in situ synthesized V8C7 particles reinforced Fe-based coating by laser cladding , 2018, Optics & Laser Technology.

[11]  Fu-chi Wang,et al.  Induction plasma spheroidization of ZrB2-SiC powders for plasma-spray coating , 2018, Journal of the European Ceramic Society.

[12]  D. Gu,et al.  Al2O3 nanoparticles reinforced Fe-Al laser cladding coatings with enhanced mechanical properties , 2018, Journal of Alloys and Compounds.

[13]  S. K. Sadrnezhaad,et al.  Cyclic oxidation characteristics of HVOF thermal-sprayed NiCoCrAlY and CoNiCrAlY coatings at 1000 °C , 2018 .

[14]  Jinxiu Wang,et al.  Influence of oxidation related structural defects on localized corrosion in HVAF-sprayed Fe-based metallic coatings , 2018 .

[15]  Dian-ran Yan,et al.  Microstructure and properties of Al 2 O 3 -ZrO 2 composite coatings prepared by air plasma spraying , 2018 .

[16]  Xiaoyan Song,et al.  Wear resistance mechanisms of near-nanostructured WC-Co coatings , 2018 .

[17]  C. Zhang,et al.  Role of Mo on tribological properties of atmospheric plasma-sprayed Mo-NiCrBSi composite coatings under dry and oil-lubricated conditions , 2017 .

[18]  J. Eckert,et al.  Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites , 2017 .

[19]  J. Seol,et al.  Tribological properties of HVOF-sprayed WC-Co coatings deposited from Ni-plated powders at elevated temperature , 2017 .

[20]  G. Bolelli,et al.  Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings , 2017 .

[21]  Yu-jiang Xie,et al.  Influence of Cr addition on the interface purification of vacuum brazed NiCr-Cr3C2 coatings on single crystal superalloy , 2017 .

[22]  V. Zadorozhnyy,et al.  Mechanical plating of Al/CNT composite coatings on aluminum substrates , 2017 .

[23]  N. Markocsan,et al.  Microstructural characteristics and corrosion behavior of HVAF- and HVOF-sprayed Fe-based coatings , 2017 .

[24]  C. Kiminami,et al.  Microstructure and wear behavior of Fe-based amorphous HVOF coatings produced from commercial precursors , 2017 .

[25]  S. Moonngam,et al.  Fabrication and properties of NiCr/CNTs nanocomposite coatings prepared by High Velocity Oxy-Fuel Spraying , 2016 .

[26]  L. Min,et al.  A Comparative Study of Spray-dried and Mechanically-mixed ZrB2-MoSi2 Composite Coatings Fabricated by Low Pressure Plasma Spray , 2016 .

[27]  H. Koivuluoto,et al.  Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings , 2014, Journal of Thermal Spray Technology.

[28]  Wei Wang,et al.  Enhancement of oxidation and wear resistance of Fe-based amorphous coatings by surface modification of feedstock powders , 2015 .

[29]  Liping Huang,et al.  Effect of feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous coatings , 2014 .

[30]  F. Shieu,et al.  Enhancement of wear and corrosion resistance of iron-based hard coatings deposited by high-velocity oxygen fuel (HVOF) thermal spraying , 2014 .

[31]  B. Bonferroni,et al.  Micromechanical properties and sliding wear behaviour of HVOF-sprayed Fe-based alloy coatings , 2012 .

[32]  D. Zeng,et al.  Microstructure and sliding wear behavior of nanostructured Ni60–TiB2 composite coating sprayed by HVOF technique , 2011 .

[33]  P. Singjai,et al.  Thermal sprayed stainless steel/carbon nanotube composite coatings , 2010 .

[34]  S. Seal,et al.  Synthesis of aluminum oxide coating with carbon nanotube reinforcement produced by chemical vapor deposition for improved fracture and wear resistance , 2010 .

[35]  R. Sachan,et al.  Formation of nanodispersoids in Fe–Cr–Al/30%TiB2 composite system during mechanical alloying , 2009 .

[36]  B. Liu,et al.  Mechanical properties of hard Cr–MWNT composite coatings , 2009 .

[37]  Weigang Zhang,et al.  Effects of solid lubricant content on the microstructure and properties of NiCr/Cr3C2–BaF2·CaF2 composite coatings , 2009 .

[38]  S. R. Bakshi,et al.  Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders , 2009 .

[39]  S. Seal,et al.  Chromium carbide–CNT nanocomposites with enhanced mechanical properties , 2009 .

[40]  Ji-shan Zhang,et al.  Preparation and Properties of a Nanostructured NiCrC Alloy Coating for Boiler Tubes Protection , 2008 .

[41]  S. R. Bakshi,et al.  Carbon nanotube reinforced aluminum composite coating via cold spraying , 2008 .

[42]  Wu Yuping,et al.  Cavitation erosion characteristics of a Fe–Cr–Si–B–Mn coating fabricated by high velocity oxy-fuel (HVOF) thermal spray , 2007 .

[43]  S. Seal,et al.  Interfacial phenomena in thermally sprayed multiwalled carbon nanotube reinforced aluminum nanocomposite , 2007 .

[44]  G. Zhang,et al.  Carbon Nanotube Composite Deposits with High Hardness and High Wear Resistance , 2003 .

[45]  B. Wang,et al.  Elevated temperature erosion of HVOF Cr3C2/TiC–NiCrMo cermet coating , 1999 .

[46]  I. Wright,et al.  Indentation fracture of WC-Co cermets , 1985 .

[47]  T. R. Wilshaw,et al.  Quasi-static solid particle damage in brittle solids—I. Observations analysis and implications , 1976 .