Passive water management at the cathode of a planar air-breathing proton exchange membrane fuel cell

Water management is a significant challenge in portable polymer electrolyte membrane (PEM) fuel cells and particularly in proton exchange membrane (PEM) fuel cells with air-breathing cathodes. Liquid water condensation and accumulation at the cathode surface is unavoidable in a passive design operated over a wide range of ambient and load conditions. Excessive flooding or dry out of the open cathode can lead to a dramatic reduction of fuel cell power. We report a water management design based on a hydrophilic and electrically conductive wick. A prototype air-breathing fuel cell with the proposed water management design successfully operated under severe flooding conditions, ambient temperature 10 ◦ C and relative humidity of 80%, for up to 6 h with no observable cathode flooding or loss of performance.

[1]  Chaoyang Wang,et al.  Two-Phase Modeling and Flooding Prediction of Polymer Electrolyte Fuel Cells , 2005 .

[2]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[3]  D. Wilkinson,et al.  Anode water removal: A water management and diagnostic technique for solid polymer fuel cells , 1995 .

[4]  Shanhai Ge,et al.  Water Management in PEMFCs Using Absorbent Wicks , 2004 .

[5]  G. Lindbergh,et al.  Adhesive copper films for an air-breathing polymer electrolyte fuel cell , 2005 .

[6]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[7]  Jeremy P. Meyers,et al.  Design considerations for miniaturized PEM fuel cells , 2002 .

[8]  G. Fedder,et al.  Micro-electro-mechanical systems (MEMS)-based micro-scale direct methanol fuel cell development , 2006 .

[9]  V. Vishnyakov.  Proton exchange membrane fuel cells , 2006 .

[10]  Ned Djilali,et al.  Transport Phenomena in Polymer Electrolyte Membranes II. Binary Friction Membrane Model , 2005 .

[11]  Andreas Schmitz,et al.  Modeling Planar and Self-Breathing Fuel Cells for Use in Electronic Devices , 2004 .

[12]  E. Ticianelli,et al.  Effects of the cathode gas diffusion layer characteristics on the performance of polymer electrolyte fuel cells , 2002 .

[13]  Andreas Schmitz,et al.  Planar self-breathing fuel cells , 2003 .

[14]  Suk Won Cha,et al.  Water management in proton exchange membrane fuel cells using integrated electroosmotic pumping , 2006 .

[15]  C. Hebling,et al.  Visualization of water buildup in the cathode of a transparent PEM fuel cell , 2003 .

[16]  Fritz B. Prinz,et al.  Measurement of Temperature and Reaction Species in the Cathode Diffusion Layer of a Free-Convection Fuel Cell , 2007 .

[17]  Suk Won Cha,et al.  The role of ambient conditions on the performance of a planar, air-breathing hydrogen PEM fuel cell , 2006 .

[18]  I. Hsing,et al.  Internally humidified polymer electrolyte fuel cells using water absorbing sponge , 2005 .

[19]  Keith B. Prater,et al.  Water management and stack design for solid polymer fuel cells , 1994 .

[20]  Fritz B. Prinz,et al.  Engineering model of a passive planar air breathing fuel cell cathode , 2007 .

[21]  Peter Lund,et al.  Evaluation of planar free-breathing polymer electrolyte membrane fuel cell design , 2004 .

[22]  Jung S. Yi,et al.  Water management along the flow channels of PEM fuel cells , 2004 .

[23]  T. Springer,et al.  Characterization of polymer electrolyte fuel cells using ac impedance spectroscopy , 1996 .

[24]  P. Lund,et al.  Effect of cathode structure on planar free-breathing PEMFC , 2004 .

[25]  P. Ekdunge,et al.  Proton Conductivity of Nafion 117 as Measured by a Four‐Electrode AC Impedance Method , 1996 .

[26]  J. Meyers,et al.  Miniature fuel cells for portable power: Design considerations and challenges , 2002 .

[27]  D. Chu,et al.  Performance of polymer electrolyte membrane fuel cell (PEMFC) stacks. Part I. Evaluation and simulation of an air-breathing PEMFC stack , 1999 .

[28]  Su Ha,et al.  A miniature air breathing direct formic acid fuel cell , 2004 .