Enhanced performance of perovskite solar cells with P3HT hole-transporting materials via molecular p-type doping

The conducting polymer poly(3-hexylthiophene-2,5-diyl) (P3HT) has been widely used as a polymeric hole-transporting material (HTM) in inorganic–organic perovskite solar cells (PSCs). However, pristine P3HT-based PSC devices typically exhibit mediocre overall performance, mainly due to its relatively low conductivity. Herein, we successfully introduced tetrafluoro-tetracyano-quinodimethane (F4TCNQ) as an efficient p-type dopant for P3HT as a HTM in mesoscopic PSCs. The overall performance was significantly enhanced after the introduction of F4TCNQ into P3HT. Under an optimal doping condition (1.0%, w/w), an impressive power conversion efficiency (PCE) of 14.4% was achieved, which was considerably higher than the pristine P3HT based devices (10.3%). The dramatic improvement of the PCE originated from the increase of the photocurrent density and fill factor, strongly correlated to the significant increase of the bulk conductivity of F4TCNQ doped P3HT. After doping with 1.0% F4TCNQ, the conductivity of the P3HT film was significantly increased by more than 50 times. UV-Vis and Fourier transform infrared spectroscopy (FTIR) measurements indicated that p-doping occurs via the electron transfer from the highest occupied molecular orbital (HOMO) level of P3HT to the lowest unoccupied molecular orbital (LUMO) level of the F4TCNQ, which led to a substantial increase of the bulk conductivity. Furthermore, PSCs based on the P3HT:F4TCNQ composite as a HTM also exhibited superior long-term stability under ambient conditions with a humidity of 40%. F4TCNQ was thus demonstrated to be an effective p-dopant for P3HT to improve the electrical properties and thereby the overall performance for highly efficient and stable PSCs.

[1]  J. Roehling,et al.  The effect of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane charge transfer dopants on the conformation and aggregation of poly(3-hexylthiophene) , 2013 .

[2]  Yunlong Guo,et al.  Enhancement in the efficiency of an organic–inorganic hybrid solar cell with a doped P3HT hole-transporting layer on a void-free perovskite active layer , 2014 .

[3]  Jeffrey A. Christians,et al.  An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide. , 2014, Journal of the American Chemical Society.

[4]  M. Grätzel,et al.  A dopant free linear acene derivative as a hole transport material for perovskite pigmented solar cells , 2015 .

[5]  G. Boschloo,et al.  Facile synthesis of fluorene-based hole transport materials for highly efficient perovskite solar cells and solid-state dye-sensitized solar cells , 2016 .

[6]  Bert Conings,et al.  Perovskite‐Based Hybrid Solar Cells Exceeding 10% Efficiency with High Reproducibility Using a Thin Film Sandwich Approach , 2014, Advanced materials.

[7]  Alex K.-Y. Jen,et al.  High-performance perovskite-polymer hybrid solar cells via electronic coupling with fullerene monolayers. , 2013, Nano letters.

[8]  R. Friend,et al.  Controlling Electrical Properties of Conjugated Polymers via a Solution‐Based p‐Type Doping , 2008 .

[9]  Tomas Leijtens,et al.  Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells. , 2014, Nano letters.

[10]  M. Grätzel,et al.  A low-cost spiro[fluorene-9,9′-xanthene]-based hole transport material for highly efficient solid-state dye-sensitized solar cells and perovskite solar cells , 2016 .

[11]  G. Boschloo,et al.  Carbazole‐Based Hole‐Transport Materials for Efficient Solid‐State Dye‐Sensitized Solar Cells and Perovskite Solar Cells , 2014, Advanced materials.

[12]  Anders Hagfeldt,et al.  Effect of Different Hole Transport Materials on Recombination in CH3NH3PbI3 Perovskite-Sensitized Mesoscopic Solar Cells. , 2013, The journal of physical chemistry letters.

[13]  J. Bell,et al.  An efficient hole transport material composite based on poly(3-hexylthiophene) and bamboo-structured carbon nanotubes for high performance perovskite solar cells , 2015 .

[14]  Xudong Yang,et al.  A dopant-free hole-transporting material for efficient and stable perovskite solar cells , 2014 .

[15]  S. Eisebitt,et al.  Localized Charge Transfer in a Molecularly Doped Conducting Polymer , 2007 .

[16]  Steffen Meyer,et al.  Copper(I) Iodide as Hole‐Conductor in Planar Perovskite Solar Cells: Probing the Origin of J–V Hysteresis , 2015 .

[17]  M. S. Akhtar,et al.  Perovskite Solar Cells: Influence of Hole Transporting Materials on Power Conversion Efficiency. , 2016, ChemSusChem.

[18]  Huajun Chen,et al.  Perovskite Solar Cells Employing Dopant‐Free Organic Hole Transport Materials with Tunable Energy Levels , 2016, Advanced materials.

[19]  Peng Gao,et al.  Facile synthesized organic hole transporting material for perovskite solar cell with efficiency of 19.8 , 2016 .

[20]  Peng Gao,et al.  Efficient luminescent solar cells based on tailored mixed-cation perovskites , 2016, Science Advances.

[21]  Y. Kivshar,et al.  Wide-band negative permeability of nonlinear metamaterials , 2012, Scientific Reports.

[22]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[23]  Xiong Gong,et al.  High Performance Perovskite Hybrid Solar Cells with E-beam-Processed TiOx Electron Extraction Layer. , 2016, ACS applied materials & interfaces.

[24]  Mohammad Khaja Nazeeruddin,et al.  Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency , 2014, Nature Communications.

[25]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[26]  Wei Chen,et al.  Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers , 2015, Science.

[27]  Yanhong Luo,et al.  Mesoscopic TiO2/CH3NH3PbI3 perovskite solar cells with new hole-transporting materials containing butadiene derivatives. , 2014, Chemical communications.

[28]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[29]  Yaoguang Rong,et al.  Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells , 2015 .

[30]  J. Bloking,et al.  Hole transport materials with low glass transition temperatures and high solubility for application in solid-state dye-sensitized solar cells. , 2012, ACS nano.