Visualization of Latent Fingerprint Corrosion of Metallic Surfaces

Abstract:  Chemical reactions between latent fingerprints and a variety of metal surfaces are investigated by heating the metal up to temperatures of ∼600°C after deposition of the fingerprint. Ionic salts present in the fingerprint residue corrode the metal surface to produce an image of the fingerprint that is both durable and resistant to cleaning of the metal. The degree of fingerprint enhancement appears independent of the elapsed time between deposition and heating but is very dependent on both the composition of the metal and the level of salt secretion by the fingerprint donor. Results are presented that show practical applications for the enhancement to fingerprints deposited in arson crime scenes, contaminated by spray painting, or deposited on brass cartridge cases prior to discharge. The corrosion of the metal surface is further exploited by the demonstration of a novel technique for fingerprint enhancement based on the electrostatic charging of the metal and then the preferential adherence of a metallic powder to the corroded part of the metal surface.

[1]  J. R. Simms,et al.  Use of Acidified Hydrogen Peroxide to Remove Excess Gun Blue from Gun Blue-Treated Cartridge Cases and to Develop Latent Prints on Untreated Cartridge Cases , 1998 .

[2]  Y Migron,et al.  Visualization of sebaceous fingerprints on fired cartridge cases: a laboratory study. , 1998, Journal of forensic sciences.

[3]  D. Landolt,et al.  Corrosion and surface chemistry of metals , 2007 .

[4]  T. C. Miller,et al.  Detection of Visible and Latent Fingerprints Using Micro‐X‐ray Fluorescence Elemental Imaging * , 2006, Journal of forensic sciences.

[5]  G. L. Thomas.  The physics of fingerprints and their detection , 1978 .

[6]  B. Wilshire,et al.  Obliteration of Latent Fingerprints , 1991 .

[7]  G. Polimeni,et al.  A novel approach to identify the presence of fingerprints on wet surfaces. , 2004, Forensic science international.

[8]  D. Worsley,et al.  Latent fingerprint detection using a scanning Kelvin microprobe. , 2001, Journal of forensic sciences.

[9]  L. Garofano,et al.  Development of latent fingerprints on metallic surfaces using electropolymerization processes. , 2001, Journal of Forensic Sciences.

[10]  D. Cheng.  Field and wave electromagnetics , 1983 .

[11]  E R Menzel,et al.  Diimide-enhanced fingerprint detection with photoluminescent CdS/dendrimer nanocomposites. , 2000, Journal of forensic sciences.

[12]  J. D. James,et al.  Magnetic Flake Powders for Fingerprint Development , 1993 .

[13]  J. Allison,et al.  A Mechanistic Model for the Superglue Fuming of Latent Fingerprints * , 2006, Journal of forensic sciences.

[14]  G. L. Thomas,et al.  Some observations on fingerprint deposits , 1975 .

[15]  B W Given,et al.  Latent fingerprints on cartridges and expended cartridge casings. , 1976, Journal of forensic sciences.

[16]  P. L. Kirk,et al.  Kirk's Fire Investigation , 1969 .

[17]  Ashim K. Datta.  Advances in Fingerprint Technology , 2001 .

[18]  Model for electrostatic imaging of forensic evidence via discharge through Mylar-paper path , 1998 .

[19]  D. Mandler,et al.  DEVELOPMENT OF LATENT FINGERPRINTS ON UNFIRED CARTRIDGES BY PALLADIUM DEPOSITION : A SURFACE STUDY , 1997 .

[20]  Henry C. Lee,et al.  Methods of Latent Fingerprint Development , 2001 .

[21]  Geraint Williams,et al.  Latent fingermark visualisation using a scanning Kelvin probe. , 2007, Forensic science international.

[22]  John D. DeHaan Ph.D. Fabc FSSDip,et al.  Kirk's Fire Investigation , 2011 .

[23]  K. Stow,et al.  The recovery of finger marks from soot-covered glass fire debris. , 2006, Science & justice : journal of the Forensic Science Society.

[24]  Henry C. Lee,et al.  Advances in Fingerprint Technology, Second Edition , 2001 .

[25]  J. Kendall.  Inorganic Chemistry , 1944, Nature.