Microstructure and mechanical properties of additive manufactured Inconel 718 alloy strengthened by oxide dispersion with 0.3 wt% Sc addition

[1]  Feng Liu,et al.  Microstructure and mechanical properties of an in-situ oxide-dispersion-strengthened NiCrFeY alloy produced by laser powder bed fusion , 2022, Advanced Powder Materials.

[2]  Chunli Yang,et al.  Grain morphology evolution mechanism of titanium alloy by the combination of pulsed arc and solution element during wire arc additive manufacturing , 2021 .

[3]  A. S. Ahmad,et al.  Effect of rolling force on tensile properties of additively manufactured Inconel 718 at ambient and elevated temperatures , 2021 .

[4]  Y. Zhou,et al.  Effects of microstructure, texture evolution and strengthening mechanisms on mechanical properties of 3003 aluminum alloy during cryogenic rolling , 2021 .

[5]  J. Ramkumar,et al.  A Study on Selective Laser Melting (SLM) of TiC and B4C Reinforced IN718 Metal Matrix Composites (MMCs) , 2021, Journal of Alloys and Compounds.

[6]  M. Mohammadi,et al.  Laser powder bed fused Inconel 718 in stress-relieved and solution heat-treated conditions , 2021, Materials Characterization.

[7]  Jinghao Xu,et al.  Effect of post-processes on the microstructure and mechanical properties of laser powder bed fused IN718 superalloy , 2021, Additive Manufacturing.

[8]  Yunping Li,et al.  A high-strength heat-resistant Al−5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting , 2021 .

[9]  Xin Lin,et al.  Room and high temperature high-cycle fatigue properties of Inconel 718 superalloy prepared using laser directed energy deposition , 2021 .

[10]  R. Suman,et al.  Role of Additive Manufacturing applications towards environmental sustainability , 2021, Advanced Industrial and Engineering Polymer Research.

[11]  Ming Yan,et al.  Additive manufacturing of metals: Microstructure evolution and multistage control , 2021 .

[12]  T. Nakano,et al.  Inverse Columnar-Equiaxed Transition (CET) in 304 and 316L Stainless Steels Melt by Electron Beam for Additive Manufacturing (AM) , 2021, Crystals.

[13]  A. Clare,et al.  The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion , 2021, Materials & Design.

[14]  T. Ishimoto,et al.  Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy , 2021 .

[15]  V. Balasubramanian,et al.  An overview on welding of Inconel 718 alloy - Effect of welding processes on microstructural evolution and mechanical properties of joints , 2021 .

[16]  Xin Lin,et al.  Strengthening mechanisms in selective laser-melted Inconel718 superalloy , 2021 .

[17]  Moataz M. Attallah,et al.  Controlling microstructural and mechanical properties of direct laser deposited Inconel 718 via laser power , 2021 .

[18]  Xiaogang You,et al.  Microstructure evolution of an Inconel 718 alloy prepared by electron beam smelting , 2021 .

[19]  Yue Zhang,et al.  Characterization of precipitation in gradient Inconel 718 superalloy , 2021, Materials Science and Engineering: A.

[20]  Lan Huang,et al.  Bimodal-grained high-strength nickel-base ODS alloy fabricated by mechanical alloying and hot extrusion , 2020 .

[21]  Michael A. Klecka,et al.  A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel , 2020 .

[22]  M. Fan,et al.  Overview of 3D additive manufacturing (AM) and corresponding AM composites , 2020 .

[23]  Sangshik Kim,et al.  Room and elevated temperature fatigue crack propagation behavior of Inconel 718 alloy fabricated by laser powder bed fusion , 2020 .

[24]  Jianbo Lei,et al.  Boosting wear properties of Inconel718 superalloy by uniform dispersing graphene nanoplatelets through laser melting deposition , 2020 .

[25]  Wentao Yan,et al.  Grain structure evolution in transition-mode melting in direct energy deposition , 2020 .

[26]  C. Cui,et al.  Microsegregation behavior of Inconel 718 superalloy prepared by electron beam smelting layered solidification technology , 2020 .

[27]  Qun Yu,et al.  Ti2AlC triggered in-situ ultrafine TiC/Inconel 718 composites: Microstructure and enhanced properties , 2020 .

[28]  J. Oliveira,et al.  Processing parameters in laser powder bed fusion metal additive manufacturing , 2020 .

[29]  S. Pasebani,et al.  Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms , 2020 .

[30]  Saurav Goel,et al.  Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems , 2020, Materials Today Chemistry.

[31]  Ze Zhang,et al.  A review of composition evolution in Ni-based single crystal superalloys , 2020 .

[32]  Tao Meng,et al.  Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition , 2020 .

[33]  H. Coules,et al.  Wire + Arc Additively Manufactured Inconel 718: Effect of post-deposition heat treatments on microstructure and tensile properties , 2019, Materials & Design.

[34]  V. Popovich,et al.  A review of mechanical properties of additively manufactured Inconel 718 , 2019 .

[35]  R. Poprawe,et al.  Effect of δ phase on high temperature mechanical performances of Inconel 718 fabricated with SLM process , 2019, Materials Science and Engineering: A.

[36]  P. Castany,et al.  Elaboration of oxide dispersion strengthened Fe-14Cr stainless steel by selective laser melting , 2019, Journal of Materials Processing Technology.

[37]  A. Eklund,et al.  Influence of thermal post treatments on microstructure and oxidation behavior of EB-PBF manufactured Alloy 718 , 2019, Materials Characterization.

[38]  Rui-di Li,et al.  Effect of heat treatment on the microstructural evolution of a precipitation-hardened superalloy produced by selective laser melting , 2019, Materials Science and Engineering: A.

[39]  Philip J. Withers,et al.  The effect of powder oxidation on defect formation in laser additive manufacturing , 2019, Acta Materialia.

[40]  Stewart Williams,et al.  Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process , 2019, Journal of Materials Processing Technology.

[41]  Yunzhi Wang,et al.  Growth behavior of γ'/γ'' coprecipitates in Ni-Base superalloys , 2019, Acta Materialia.

[42]  J. Schoenung,et al.  Strengthening mechanisms in directed energy deposited austenitic stainless steel , 2019, Acta Materialia.

[43]  Ming Yan,et al.  Selective Laser Melting Under the Reactive Atmosphere: A Convenient and Efficient Approach to Fabricate Ultrahigh Strength Commercially Pure Titanium Without Sacrificing Ductility , 2019, Materials Science and Engineering: A.

[44]  M. Daymond,et al.  Combination of back stress strengthening and Orowan strengthening in bimodal structured Fe–9Cr–Al ODS steel with high Al addition , 2019, Materials Science and Engineering: A.

[45]  Stewart Williams,et al.  Enhancing mechanical properties of wire + arc additively manufactured INCONEL 718 superalloy through in-process thermomechanical processing , 2018, Materials & Design.

[46]  YaChao Wang,et al.  Mechanical and tribological behaviors of graphene/Inconel 718 composites , 2018, Transactions of Nonferrous Metals Society of China.

[47]  Xin Lin,et al.  Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming , 2018, Journal of Alloys and Compounds.

[48]  Simon P. Ringer,et al.  On conventional versus direct ageing of Alloy 718 , 2018, Acta Materialia.

[49]  L. Svensson,et al.  Microstructural characterization of laser metal powder deposited Alloy 718 , 2018, Materials Characterization.

[50]  E. Lavernia,et al.  Dispersoids and γ′ precipitates in an ultrafine grained René 88DT – 5vol.%Y2O3 alloy with outstanding thermal stability , 2018, Materials Characterization.

[51]  S. Hayashi,et al.  Directional recrystallization by zone annealing in a Ni-based ODS superalloy , 2018 .

[52]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[53]  Seung Ki Moon,et al.  Effects of heat treatment on microstructures and tensile properties of IN718/TiC nanocomposite fabricated by selective laser melting , 2017, International Journal of Precision Engineering and Manufacturing.

[54]  D. Masaylo,et al.  Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting , 2017 .

[55]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[56]  Rui-di Li,et al.  Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing , 2017 .

[57]  B. Pan,et al.  Simultaneous Oxidation and Sequestration of As(III) from Water by Using Redox Polymer-Based Fe(III) Oxide Nanocomposite. , 2017, Environmental science & technology.

[58]  F. Medina,et al.  Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process , 2017 .

[59]  C. Körner,et al.  Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting , 2016 .

[60]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[61]  Guanqun Yu,et al.  Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms , 2016 .

[62]  Chor Yen Yap,et al.  Review of selective laser melting : materials and applications , 2015 .

[63]  Dongyun Zhang,et al.  Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy , 2015 .

[64]  Tresa M. Pollock,et al.  Strengthening Mechanisms in Polycrystalline Multimodal Nickel-Base Superalloys , 2009 .

[65]  W. Tiller,et al.  The redistribution of solute atoms during the solidification of metals , 1953 .

[66]  E. Aydogan,et al.  Development and Additive Manufacturing of Oxide Dispersion Strengthened Inconel 718: Thermochemical and Experimental Studies , 2022, SSRN Electronic Journal.

[67]  Yusheng Shi,et al.  Investigation on the influence of heat treatment on Inconel 718 fabricated by selective laser melting: Microstructure and high temperature tensile property , 2021 .

[68]  S. Newman,et al.  Future research directions in the machining of Inconel 718 , 2021 .

[69]  R. Dendievel,et al.  Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting , 2018 .

[70]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[71]  M. Chandrasekaran,et al.  Investigation on welding characteristics of aerospace materials – A review , 2017 .

[72]  J. Nellesen,et al.  Hot isostatic pressing of IN718 components manufactured by selective laser melting , 2017 .