Maximum Power Point Tracking under stand-alone operation using energy storage device

Due to depletion of fossil fuels and environmental problem, renewable energy has become one of the important energy resources. For the purpose of efficient power generation of the renewable energy sources, MPPT control is essential. But if the power conditioning system operates under stand-alone mode, MPPT control is unavailable for the parameter control of the local load. This paper proposes a maximum Power Point Tracking(MPPT) method for stand-alone operation of Photovoltaic(PV) systems with energy storage system including a bi-directional charger/discharger. In this paper, the operation principles and control scheme are presented, along with the performance evaluation using PSIM simulation and hardware prototype. 500W hardware prototype has been implemented for the analysis verification.

[1]  Joung-Hu Park,et al.  Controller design of power conditioning systems with energy storage device for renewable energy source under stand-alone operation , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[2]  B. Fahimi,et al.  Modeling and analysis of switched mode DC-DC converters for vehicular power systems , 2005, 2005 IEEE Vehicle Power and Propulsion Conference.

[3]  Dariusz Czarkowski,et al.  Voltage-mode-controlled PWM buck DC-DC converter with a proportional controller , 1993, Proceedings of the IEEE 1993 National Aerospace and Electronics Conference-NAECON 1993.