Crystal Phases and Thermal Stability of Co-evaporated CsPbX3 (X = I, Br) Thin Films.

We present the growth, phase transitions, and thermal decomposition of CsPbX3 (X = I, Br) thin films monitored by in situ X-ray diffraction (XRD). The perovskite films are prepared in vacuum via co-evaporation of PbX2 and CsX (X = I, Br) onto glass substrates. In situ X-ray diffraction allows the observation of phase transitions and decomposition while the samples are heated with a linear temperature ramp. Our experiments reveal the decomposition route for the CsPbX3 perovskites in high vacuum, with a much higher stability than their hybrid organic-inorganic MAPbX3 counterparts. We also observe the response of a black CsPbI3 thin film to exposure to ambient air at room temperature using the same XRD system. Exposing the black CsPbI3 to ambient air leads to the formation of yellow orthorhombic δ-CsPbI3, whose crystal structure could be identified by its X-ray diffraction pattern. Additionally, the linear coefficients of expansion are determined for δ-CsPbI3 and the (020)-orientation of CsPbBr3.

[1]  M. Johnston,et al.  Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells , 2014 .

[2]  Aslihan Babayigit,et al.  Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite , 2015 .

[3]  Rebecca A. Belisle,et al.  Cesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells. , 2016, The journal of physical chemistry letters.

[4]  Jay B. Patel,et al.  Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells , 2016 .

[5]  V. Massarotti,et al.  Binary Systems Formed by Lead Bromide with (Li, Na, K, Rb, Cs and Tl)Br: a DTA and Diffractometric Study , 1971 .

[6]  Tomas Leijtens,et al.  Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells. , 2014, Nano letters.

[7]  D. Trots,et al.  High-temperature structural evolution of caesium and rubidium triiodoplumbates , 2008 .

[8]  H. Snaith,et al.  Vapour-Deposited Cesium Lead Iodide Perovskites: Microsecond Charge Carrier Lifetimes and Enhanced Photovoltaic Performance , 2017, ACS energy letters.

[9]  Jenny Nelson,et al.  Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells , 2015 .

[10]  David Cahen,et al.  How Important Is the Organic Part of Lead Halide Perovskite Photovoltaic Cells? Efficient CsPbBr3 Cells. , 2015, The journal of physical chemistry letters.

[11]  Guangda Niu,et al.  Inorganic CsPbI3 Perovskite‐Based Solar Cells: A Choice for a Tandem Device , 2017 .

[12]  Jinli Yang,et al.  Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques. , 2015, ACS nano.

[13]  Zhifu Liu,et al.  Crystal Growth of the Perovskite Semiconductor CsPbBr3: A New Material for High-Energy Radiation Detection , 2013 .

[14]  M. Grätzel,et al.  Thermal Behavior of Methylammonium Lead- trihalide Perovskite Photovoltaic Light Harvesters , 2014 .

[15]  Hung‐Yu Lin,et al.  All‐Vacuum‐Deposited Stoichiometrically Balanced Inorganic Cesium Lead Halide Perovskite Solar Cells with Stabilized Efficiency Exceeding 11% , 2017, Advanced materials.

[16]  David Cahen,et al.  Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells. , 2015, The journal of physical chemistry letters.

[17]  Sidney R. Cohen,et al.  Mechanical properties of A Pb X 3 ( A = Cs or CH 3 NH 3 ; X = I or Br) perovskite single crystals , 2015, 1508.04071.

[18]  Yi Yu,et al.  Structural, optical, and electrical properties of phase-controlled cesium lead iodide nanowires , 2017, Nano Research.

[19]  C. K. Møller Crystal Structure and Photoconductivity of Cæsium Plumbohalides , 1958 .