Further results in J and CTOD estimation procedures for SE(T) fracture specimens - Part I: Homogeneous materials
暂无分享,去创建一个
[1] Robert H. Dodds,et al. J and CTOD estimation equations for shallow cracks in single edge notch bend specimens , 1993 .
[2] Jd Landes,et al. THE J INTEGRAL AS A FRACTURE CRITERION , 1972 .
[3] Eberhard Roos,et al. A procedure for the experimental assessment of the J-integral by means of specimens of different geometries , 1986 .
[4] Claudio Ruggieri,et al. Further developments in J evaluation procedure for growing cracks based on LLD and CMOD data , 2007 .
[5] Claudio Ruggieri,et al. Estimation procedure of J-resistance curves for SE(T) fracture specimens using unloading compliance , 2007 .
[6] John W. Hutchinson,et al. Stability Analysis of J -Controlled Crack Growth , 1979 .
[7] John D. Landes,et al. The load separation criterion and methodology in ductile fracture mechanics , 1991 .
[8] B. Moran,et al. A general treatment of crack tip contour integrals , 1987 .
[9] J. Hutchinson. Fundamentals of the Phenomenological Theory of Nonlinear Fracture Mechanics , 1983 .
[10] Claudio Ruggieri,et al. Correlation of fracture behavior in high pressure pipelines with axial flaws using constraint designed test specimens––Part I: Plane-strain analyses , 2005 .
[11] James A. Gianetto,et al. Fracture Toughness Evaluation of High Strength Steel Pipe , 2008 .
[12] H. Saunders,et al. Advanced Fracture Mechanics , 1985 .
[13] K. Broberg. Cracks and Fracture , 1999 .
[14] Claudio Ruggieri,et al. Correlation of fracture behavior in high pressure pipelines with axial flaws using constraint designed test specimens. Part II: 3-D effects on constraint , 2006 .
[15] John R. Rice,et al. Some further results of J-integral analysis and estimates. , 1973 .
[16] Pc Paris,et al. A J-Integral Approach to Development of η -Factors , 1980 .
[17] Guk-Rwang Won. American Society for Testing and Materials , 1987 .
[18] R. E. Link,et al. Crack Size Evaluation Using Unloading Compliance in Single-Specimen Single-Edge-Notched Tension Fracture Toughness Testing , 2009 .
[19] Bård Nyhus,et al. SENT Specimens an Alternative to SENB Specimens for Fracture Mechanics Testing of Pipelines , 2003 .
[20] C. Shih,et al. Relationships between the J-integral and the crack opening displacement for stationary and extending cracks , 1981 .
[21] James A. Joyce,et al. Effects of constraint on upper shelf fracture toughness , 1995 .
[22] Gustavo Henrique Bolognesi Donato,et al. Constraint Effects and Crack Driving Forces in Surface Cracked Pipes Subjected to Reeling , 2008 .
[23] C. Turner,et al. Method for Laboratory Determination of J c , 1976 .
[24] Yun-Jae Kim,et al. Plastic η factor solutions of homogeneous and bi‐material SE(T) specimens for toughness and creep crack growth testing , 2001 .
[25] E. M. Hackett,et al. Effects of Crack Depth and Mode of Loading on the J-R Curve Behavior of a High-Strength Steel , 1993 .