Experimental investigation on the impact of tube bundle designs on heat transfer coefficient in gas-solid fluidized bed reactor for Fischer-Tropsch synthesis
暂无分享,去创建一个
A. Sultan | M. Al-Dahhan | Jamal M. Ali | Laith S. Sabri | H. Majdi | Hussein G. Salih | Zahraa W. Hasan
[1] Tiefeng Wang,et al. Hydrodynamic behaviors of a spouted fluidized bed with a conical distributor and auxiliary inlets for the production of polysilicon with wide-size-distribution particles , 2022, Chemical Engineering Science.
[2] A. Sultan,et al. Adsorption of methyl green stain from aqueous solutions using non-conventional adsorbent media: Isothermal kinetic and thermodynamic studies , 2021 .
[3] Michael Q. Wang,et al. Performance and cost analysis of liquid fuel production from H2 and CO2 based on the Fischer-Tropsch process , 2021 .
[4] Wei Huang,et al. Review on the effect of heat exchanger tubes on flow behavior and heat/mass transfer of the bubble/slurry reactors , 2021 .
[5] N. Abu‐Hamdeh,et al. Analysis of double U-tube ground heat exchanger for renewable energy applications with two-region simulation model by combining analytical and numerical techniques , 2021 .
[6] N. Yang,et al. Characterizing regime transitions in a bubble column with internals , 2021 .
[7] P. Mahanta,et al. Characterization of sand particles in a bubbling fluidized bed with diverging riser , 2020 .
[8] Y. Lim,et al. Flow behavior and heat transfer in bubbling fluidized-bed with immersed heat exchange tubes for CO2 methanation , 2020 .
[9] Y. Abdulaziz,et al. Determination of Heat Transfer Coefficients in Air-Solid Fluidized Bed , 2020, IOP Conference Series: Materials Science and Engineering.
[10] M. Al-Dahhan,et al. Validation of the new mechanistic scale‐up of gas‐solid fluidized beds using advanced non‐invasive measurement techniques , 2020 .
[11] B. Chalermsinsuwan,et al. Effect of design parameters on system mixing for a micro fluidized bed reactor using computational fluid dynamics simulation , 2020, Brazilian Journal of Chemical Engineering.
[12] Laith S. Sabri,et al. Local volumetric mass transfer coefficient estimation for Scenedesmus microalgae culture in a cylindrical airlift photobioreactor , 2020 .
[13] A. Sultan,et al. Split internal-loop photobioreactor for Scenedesmus sp. microalgae: Culturing and hydrodynamics , 2020 .
[14] Wei-Je Huang,et al. The effect of non-uniform temperature on the sorption-enhanced steam methane reforming in a tubular fixed-bed reactor , 2020 .
[15] Omar M. Basha,et al. Techno-economic assessment of Fischer-Tropsch synthesis and direct methane-to-methanol processes in modular GTL reactors , 2020 .
[16] R. G. Santos,et al. Biomass-derived syngas production via gasification process and its catalytic conversion into fuels by Fischer Tropsch synthesis: A review , 2020 .
[17] Hong-wei Li,et al. Experimental and CFD-DEM numerical evaluation of flow and heat transfer characteristics in mixed pulsed fluidized beds , 2020 .
[18] C. Briens,et al. Applications of electrostatic probes in fluidized beds , 2020, Powder Technology.
[19] L. M. García-Gutiérrez,et al. Experimental evaluation of the convection heat transfer coefficient of large particles moving freely in a fluidized bed reactor , 2020 .
[20] Md. Tanvir Alam,et al. A review on the production of renewable aviation fuels from the gasification of biomass and residual wastes , 2020, Bioresource Technology.
[21] F. Jiang,et al. Heat-transfer performance and pressure drop in a gas-solid circulating fluidized bed spiral-plate heat exchanger , 2020 .
[22] Yongrong Yang,et al. Electrostatic effects on hydrodynamics in the riser of the circulating fluidized bed for polypropylene , 2020 .
[23] Thomas A. Adams,et al. Comprehensive environmental impact assessment of a combined petroleum coke and natural gas to Fischer-Tropsch diesel process , 2020 .
[24] Zhenfu Luo,et al. Impact of vertical internals on the hydrodynamics and separation performance of a gas–solid separation fluidized bed , 2020 .
[25] Jaroslaw Krzywanski,et al. Heat Transfer Performance in a Superheater of an Industrial CFBC Using Fuzzy Logic-Based Methods , 2019, Entropy.
[26] M. Al-Dahhan,et al. The effects of internals and low aspect ratio on the fully developed flow region and bubble properties in a pilot-plant bubble column , 2019, Experimental Thermal and Fluid Science.
[27] A. Sultan,et al. Impact of heat exchanging internals configurations on the gas holdup and bubble properties in a bubble column , 2019, International Journal of Multiphase Flow.
[28] Lijun Wang,et al. Experimental and Numerical Investigation of Particle Flow and Mixing Characteristics in an Internally Circulating Fluidized Bed , 2019, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN.
[29] Muthanna H. Al-Dahhan,et al. Investigating the influence of the configuration of the bundle of heat exchanging tubes and column size on the gas holdup distributions in bubble columns via gamma-ray computed tomography , 2018, Experimental Thermal and Fluid Science.
[30] A. Banerjee,et al. Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts , 2018, Experimental Heat Transfer.
[31] E. W. C. Lim,et al. Heat transfer from an immersed tube in a pulsating fluidized bed , 2018, Applied Thermal Engineering.
[32] Muthanna Al-Dahhan,et al. The impact of vertical internals array on the key hydrodynamic parameters in a gas-solid fluidized bed using an advance optical fiber probe , 2018, Advanced Powder Technology.
[33] A. Sultan,et al. Overcoming the Gamma-Ray Computed Tomography Data Processing Pitfalls for Bubble Column Equipped with Vertical Internal Tubes , 2018 .
[34] A. Sultan,et al. Influence of the size of heat exchanging internals on the gas holdup distribution in a bubble column using gamma-ray computed tomography , 2018, Chemical Engineering Science.
[35] M. Al-Dahhan,et al. Heat transfer and hydrodynamics in a gas-solid fluidized bed with vertical immersed internals , 2018, International Journal of Heat and Mass Transfer.
[36] S. Sundaresan,et al. Experimental and numerical study of wall layer development in a tribocharged fluidized bed , 2018, Journal of Fluid Mechanics.
[37] M. Al-Dahhan,et al. Experimental Investigation of the Helium Natural Circulation Heat Transfer in Two Channels Facility using Varying Riser Channel Heat Fluxes , 2018 .
[38] John R. Grace,et al. Electrostatics in gas-solid fluidized beds: A review , 2017 .
[39] M. Mesfer,et al. Study the effect of dense internals on the liquid velocity field and turbulent parameters in bubble column for Fischer–Tropsch (FT) synthesis by using Radioactive Particle Tracking (RPT) technique , 2017 .
[40] M. Mesfer,et al. Impacts of dense heat exchanging internals on gas holdup cross-sectional distributions and profiles of bubble column using gamma ray Computed Tomography (CT) for FT synthesis , 2016 .
[41] William A. Rogers,et al. Hydrodynamics of gas–solids flow in a bubbling fluidized bed with immersed vertical U-tube banks , 2016 .
[42] Sinan L. Teske,et al. Influence of vertical internals on a bubbling fluidized bed characterized by X-ray tomography , 2015 .
[43] B. Chalermsinsuwan,et al. Effect of operating parameters inside circulating fluidized bed reactor riser with ring baffles using CFD simulation and experimental design analysis , 2014 .
[44] Myung-June Park,et al. Computational fluid dynamics model of a modular multichannel reactor for Fischer–Tropsch synthesis: Maximum utilization of catalytic bed by microchannel heat exchangers , 2013 .
[45] M. Duduković,et al. Bubble Columns with Internals: A Review , 2013 .
[46] M. Yaghoubi,et al. An Investigation of Natural Convection Heat Transfer from a Horizontal Cooled Finned Tube , 2013 .
[47] A. Prakash,et al. Influence of bubble column diameter on local heat transfer and related hydrodynamics , 2011 .
[48] W. Pan,et al. Heat transfer characteristics in a horizontal swirling fluidized bed , 2011 .
[49] Saeed Zeinali Heris,et al. Convective Heat Transfer of a Cu/Water Nanofluid Flowing Through a Circular Tube , 2009 .
[50] J. Grace,et al. Heat transfer from immersed vertical tube in a fluidized bed of group A particles near the transition to the turbulent fluidization flow regime , 2008 .
[51] Animesh Dutta,et al. An experimental investigation into the heat transfer on wing walls in a circulating fluidized bed boiler , 2002 .
[52] D. González-Mendizabal,et al. Fluid-dynamic experimental study in a bubble column with internals , 2001 .
[53] H. Meier,et al. Influence of different parameters on the tube-to-bed heat transfer coefficient in a gas-solid fluidized bed heat exchanger , 2020 .
[54] A. Sultan,et al. Corrigendum To: Overcoming the Gamma-Ray Computed Tomography Data Processing Pitfalls for Bubble Column Equipped with Vertical Internal Tubes (The Canadian Journal of Chemical Engineering, (2018), 96, 10, (2206-2226), 10.1002/Cjce.23221) , 2019 .
[55] U. Hampel,et al. A study on the influence of the tube layout on sub-channel hydrodynamics in a bubble column with internals , 2018 .
[56] Pinakeswar Mahanta,et al. Parametric study on the hydrodynamics and heat transfer along the riser of a pressurized circulating fluidized bed unit , 2013 .
[57] A. Sultan,et al. Prediction of Heat Transfer Coefficient of Pool Boiling Using Back propagation Neural Network , 2012 .