论文信息 - Assembly technology for the manufacture of LCOS panels

Assembly technology for the manufacture of LCOS panels

— The technological issues related to the fabrication of high-performance LCOS displays are described. The considered devices use the vertically aligned nematic liquid-crystal mode because of its superior performance characteristics. The issues addressed mostly stem from this choice and the ensuing need for inorganic alignment layers. In particular, the compatibility of the inorganic alignment layers with the sealant material are treated in detail.

[1] Iwao Takemoto,et al. 5.4:Silicon Chip Based Reflective PDLC Light Valve for Projection Display , 1998 .

[2] O. Akimoto,et al. 39.2: SXRD (Silicon X‐tal Reflective Display); A New Display Device for Projection Displays , 2005 .

[3] Markus Duelli,et al. P‐155: High Performance Contrast Enhancing Films for VAN‐Mode LCoS Panels , 2005 .

[4] Mary Lou Jepsen. 39.1: Invited Paper: Why Analog Silicon May Be Best For LCOS Digital TV , 2005 .

[5] Derek B. Dove,et al. Design and fabrication of a prototype projection data monitor with high information content , 1998, IBM J. Res. Dev..

[6] Andre Van Calster,et al. Measurement methodology for vertically aligned nematic reflective displays , 2003, IS&T/SPIE Electronic Imaging.

[7] J. V. Steen,et al. WXGA LCOS projection panel with vertically aligned nematic LC , 2003 .

[8] André Van Calster,et al. Assembly of an XGA 0.9" LCOS display using inorganic alignment layers for VAN LC , 2002 .

[9] Keiichiro Doi,et al. 5.3: Reflective AM LCD for Projection Displays: D‐ILA™ , 1998 .

[10] John L. Janning. Thin film surface orientation for liquid crystals , 1972 .

[11] Herbert De Smet,et al. Design, fabrication and evaluation of a high-performance XGA VAN-LCOS microdisplay , 2002 .

[12] André Van Calster,et al. Fringe-field induced disclinations in VAN LCOS panels , 2004 .

[13] K. Hiroshima. Controlled High-Tilt-Angle Nematic Alignment Compatible with Glass Frit Sealing , 1982 .