Three-dimensional microarchitected materials and devices using nanoparticle assembly by pointwise spatial printing

Nanoparticles can be assembled in space using additive printing to create complex hierarchical 3D microarchitected and nanoarchitected materials. Three-dimensional (3D) hierarchical materials are important to a wide range of emerging technological applications. We report a method to synthesize complex 3D microengineered materials, such as microlattices, with nearly fully dense truss elements with a minimum diameter of approximately 20 μm and having high aspect ratios (up to 20:1) without using any templating or supporting materials. By varying the postprocessing conditions, we have also introduced an additional control over the internal porosity of the truss elements to demonstrate a hierarchical porous structure with an overall void size and feature size control of over five orders of magnitudes in length scale. The method uses direct printing of nanoparticle dispersions using the Aerosol Jet technology in 3D space without templating or supporting materials followed by binder removal and sintering. In addition to 3D microlattices, we have also demonstrated directly printed stretchable interconnects, spirals, and pillars. This assembly method could be implemented by a variety of microdroplet generation methods for fast and large-scale fabrication of the hierarchical materials for applications in tissue engineering, ultralight or multifunctional materials, microfluidics, and micro-optoelectronics.

[1]  N. Drake,et al.  The role of playas in pedogenic gypsum crust formation in the Central Namib Desert: a theoretical model , 2001 .

[2]  Se Hyun Kim,et al.  Printed, sub‐2V ZnO Electrolyte Gated Transistors and Inverters on Plastic , 2013, Advances in Materials.

[3]  Peter Fratzl,et al.  Biomimetic materials research: what can we really learn from nature's structural materials? , 2007, Journal of The Royal Society Interface.

[4]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[5]  John A. Rogers,et al.  Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.

[6]  Flaviana Calignano,et al.  3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles , 2016, Advanced materials.

[7]  Frank Greer,et al.  Fabrication and deformation of three-dimensional hollow ceramic nanostructures. , 2013, Nature materials.

[8]  M. Ashby.  The properties of foams and lattices , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[9]  T. Inui,et al.  An ethylene glycol derivative of boehmite , 1988 .

[10]  Costas P. Grigoropoulos,et al.  3D micro-structures by piezoelectric inkjet printing of gold nanofluids , 2012 .

[11]  S. D. Papka,et al.  In-plane compressive response and crushing of honeycomb , 1994 .

[12]  Yi Cui,et al.  Self-assembled three-dimensional and compressible interdigitated thin-film supercapacitors and batteries , 2015, Nature Communications.

[13]  Xiaoyu Zheng,et al.  Multiscale metallic metamaterials. , 2016, Nature materials.

[14]  C. Grey,et al.  Molten Salt Synthesis and High Rate Performance of the “Desert‐Rose” form of LiCoO2 , 2008 .

[15]  Paul V. Braun,et al.  Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes. , 2011, Nature nanotechnology.

[16]  Howon Lee,et al.  Ultralight, ultrastiff mechanical metamaterials , 2014, Science.

[17]  J. Greer,et al.  Nanoscale gold pillars strengthened through dislocation starvation , 2006 .

[18]  R. Ritchie,et al.  Bioinspired structural materials. , 2014, Nature materials.

[19]  Bart Nooteboom,et al.  A theoretical model , 2018 .

[20]  G McHale,et al.  Analysis of droplet evaporation on a superhydrophobic surface. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[21]  P. Fauchet.  Charge- and size-based separation of macromolecules using novel ultrathin silicon membranes , 2007, LEOS 2007 - IEEE Lasers and Electro-Optics Society Annual Meeting Conference Proceedings.

[22]  Coefficients of evaporation and gas phase diffusion of low-volatility organic solvents in nitrogen from interferometric study of evaporating droplets. , 2010, The journal of physical chemistry. A.

[23]  S. Raman,et al.  A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications , 2011 .

[24]  Kevin W Eliceiri,et al.  NIH Image to ImageJ: 25 years of image analysis , 2012, Nature Methods.

[25]  Weng-Sing Hwang,et al.  Investigation of molten metal droplet deposition and solidification for 3D printing techniques , 2016 .

[26]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[27]  Michael Rottmayer,et al.  Aerosol Jet Printing and Microstructure of SOFC Electrolyte and Cathode Layers , 2011 .

[28]  J. Lewis,et al.  Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces , 2011, Advanced materials.

[29]  Simon Song,et al.  Hierarchical and Multifunctional Three‐Dimensional Network of Carbon Nanotubes for Microfluidic Applications , 2012, Advanced materials.

[30]  Kerstin Pingel,et al.  50 Years of Image Analysis , 2012 .

[31]  Je Hoon Oh,et al.  Solvent and substrate effects on inkjet-printed dots and lines of silver nanoparticle colloids , 2011 .

[32]  Brian Derby,et al.  Printing and Prototyping of Tissues and Scaffolds , 2012, Science.

[33]  Robert Furstenberg,et al.  Filling Fraction Dependent Properties of Inverse Opal Metallic Photonic Crystals , 2007 .

[34]  Jiyoul Lee,et al.  Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic. , 2008, Nature materials.

[35]  Hussein M. Zbib,et al.  Analysis of heterogeneous deformation and dislocation dynamics in single crystal micropillars under compression , 2010 .

[36]  Costas P. Grigoropoulos,et al.  Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication , 2010 .

[37]  Shaorong Xie,et al.  A review of non-contact micro- and nano-printing technologies , 2014 .

[38]  Luke Renaud,et al.  Aerosol based direct-write micro-additive fabrication method for sub-mm 3D metal-dielectric structures , 2015 .