Bayesian operational modal analysis with asynchronous data, part I: Most probable value

Abstract In vibration tests, multiple sensors are used to obtain detailed mode shape information about the tested structure. Time synchronisation among data channels is required in conventional modal identification approaches. Modal identification can be more flexibly conducted if this is not required. Motivated by the potential gain in feasibility and economy, this work proposes a Bayesian frequency domain method for modal identification using asynchronous ‘output-only’ ambient data, i.e. ‘operational modal analysis’. It provides a rigorous means for identifying the global mode shape taking into account the quality of the measured data and their asynchronous nature. This paper (Part I) proposes an efficient algorithm for determining the most probable values of modal properties. The method is validated using synthetic and laboratory data. The companion paper (Part II) investigates identification uncertainty and challenges in applications to field vibration data.

[1]  J. Vig.  Introduction to Quartz Frequency Standards , 1992 .

[2]  Martin Dalgaard Ulriksen,et al.  Sensor distributions for structural monitoring: a correlation study , 2017 .

[3]  Elliott D. Kaplan.  Understanding GPS : principles and applications , 1996 .

[4]  J. Beck.  Bayesian system identification based on probability logic , 2010 .

[5]  A. Demir,et al.  Phase noise in oscillators: a unifying theory and numerical methods for characterization , 2000 .

[6]  L. Katafygiotis,et al.  A two-stage fast Bayesian spectral density approach for ambient modal analysis. Part I: Posterior most probable value and uncertainty , 2015 .

[7]  J. Beck,et al.  Updating Models and Their Uncertainties. I: Bayesian Statistical Framework , 1998 .

[8]  David J. Ewins,et al.  Modal Testing: Theory, Practice, And Application , 2000 .

[9]  Siu-Kui Au,et al.  Fast Bayesian FFT Method for Ambient Modal Identification with Separated Modes , 2011 .

[10]  D. Brillinger.  Time series - data analysis and theory , 1981, Classics in applied mathematics.

[11]  Lambros S. Katafygiotis,et al.  Bayesian Fast Fourier Transform Approach for Modal Updating Using Ambient Data , 2003 .

[12]  Helmut Wenzel,et al.  Ambient Vibration Monitoring , 2005 .

[13]  Saurabh Ganeriwal,et al.  Timing-sync protocol for sensor networks , 2003, SenSys '03.

[14]  J. Elson,et al.  Fine-grained network time synchronization using reference broadcasts , 2002, OSDI '02.

[15]  David L. Mills,et al.  Internet time synchronization: the network time protocol , 1991, IEEE Trans. Commun..

[16]  Bart De Moor,et al.  Subspace Identification for Linear Systems: Theory ― Implementation ― Applications , 2011 .

[17]  Christof Devriendt,et al.  The use of transmissibility measurements in output-only modal analysis , 2007 .

[18]  Lambros S. Katafygiotis,et al.  Bayesian spectral density approach for modal updating using ambient data , 2001 .

[19]  Guido De Roeck,et al.  REFERENCE-BASED STOCHASTIC SUBSPACE IDENTIFICATION FOR OUTPUT-ONLY MODAL ANALYSIS , 1999 .

[20]  Walter Salvatore,et al.  Operational Modal Analysis of civil engineering structures: aims and applications , 2008 .

[21]  Wang-Ji Yan,et al.  A two-stage fast Bayesian spectral density approach for ambient modal analysis. Part II: Mode shape assembly and case studies , 2015 .

[22]  Donald E. Hudson,et al.  Dynamic Tests of Full-Scale Structures , 1977 .

[23]  R. Baierlein.  Probability Theory: The Logic of Science , 2004 .

[24]  Gerhard Fettweis,et al.  The effects of aperture jitter and clock jitter in wideband ADCs , 2007, Comput. Stand. Interfaces.

[25]  Carlos E. Ventura,et al.  Introduction to Operational Modal Analysis , 2015 .

[26]  Siu-Kui Au,et al.  Bayesian operational modal analysis: Theory, computation, practice , 2013 .

[27]  Wang-Ji Yan,et al.  An Enhanced Power Spectral Density Transmissibility (EPSDT) approach for operational modal analysis: Theoretical and experimental investigation , 2015 .

[28]  J M W Brownjohn,et al.  Structural health monitoring of civil infrastructure , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[29]  Keith Worden,et al.  An introduction to structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[30]  R. B. Testa,et al.  Modal Analysis for Damage Detection in Structures , 1991 .

[31]  Maria I. Todorovska,et al.  Ambient vibration tests of a seven-story reinforced concrete building in Van Nuys, California, damaged by the 1994 Northridge earthquake , 2000 .

[32]  Thomas G. Carne,et al.  The Natural Excitation Technique (NExT) for modal parameter extraction from operating wind turbines , 1993 .

[33]  Carlo Rainieri,et al.  Operational Modal Analysis of Civil Engineering Structures: An Introduction and Guide for Applications , 2014 .

[34]  Carlos E. Ventura,et al.  Introduction to Operational Modal Analysis: Brincker/Introduction to Operational Modal Analysis , 2015 .

[35]  Gaetano Scarano,et al.  Discrete time techniques for time delay estimation , 1993, IEEE Trans. Signal Process..

[36]  Rune Brincker,et al.  Modal identification of output-only systems using frequency domain decomposition , 2001 .

[37]  Julius S. Bendat,et al.  Engineering Applications of Correlation and Spectral Analysis , 1980 .

[38]  Yang Wang,et al.  Wireless Structural Sensors using Reliable Communication Protocols for Data Acquisition and Interrogation , 2004 .

[39]  Siu-Kui Au,et al.  Spectral characteristics of asynchronous data in operational modal analysis , 2017 .

[40]  Deborah Estrin,et al.  Proceedings of the 5th Symposium on Operating Systems Design and Implementation Fine-grained Network Time Synchronization Using Reference Broadcasts , 2022 .

[41]  Lambros S. Katafygiotis,et al.  Bayesian time–domain approach for modal updating using ambient data , 2001 .

[42]  S. Bjorklund,et al.  A review of time-delay estimation techniques , 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

[43]  Sherif Beskhyroun,et al.  New methodology for the application of vibration‐based damage detection techniques , 2012 .

[44]  A. Emin Aktan,et al.  Structural identification of constructed systems : approaches, methods, and technologies for effective practice of St-Id , 2013 .