Precise Volumetric Measurements of Any Shaped Objects with a Novel Acoustic Volumeter

We introduce a novel technique to measure volumes of any shaped objects based on acoustic components. The focus is on small objects with rough surfaces, such as plant seeds. The method allows measurement of object volumes more than 1000 times smaller than the volume of the sensor chamber with both high precision and high accuracy. The method is fast, noninvasive, and easy to produce and use. The measurement principle is supported by theory, describing the behavior of the measured data for objects of known volumes in a range of 1 to 800 µL. In addition to single-frequency, we present frequency-dependent measurements that provide supplementary information about pores on the surface of a measured object, such as the total volume of pores and, in the case of cylindrical pores, their average radius-to-length ratio. We demonstrate the usefulness of the method for seed phenotyping by measuring the volume of irregularly shaped seeds and showing the ability to “look” under the husk and inside pores, which allows us to assess the true density of seeds.

[1]  B. Dalton,et al.  Persistent adhesion of epithelial tissue is sensitive to polymer topography. , 1999, Journal of biomedical materials research.

[2]  M. Ueki,et al.  Measurement of the volume of weights using an acoustic volumeter and the reliability of such measurement , 2004 .

[3]  O. Cramer The variation of the specific heat ratio and the speed of sound in air with temperature, pressure, humidity, and CO2 concentration , 1993 .

[4]  Bernhard P. Wrobel,et al.  Multiple View Geometry in Computer Vision , 2001 .

[5]  Acoustic Bridge Volumeter , 1994 .

[6]  A. Pagano,et al.  Effect of moisture content on some physical properties of barley , 2013 .

[7]  ARNO KNAPITSCH,et al.  Tanks and temples , 2017, ACM Trans. Graph..

[8]  A. Pajdak,et al.  The use of selected research methods to describe the pore space of dolomite from copper ore mine, Poland , 2017, Environmental Earth Sciences.

[9]  H. Scharr,et al.  phenoSeeder - A Robot System for Automated Handling and Phenotyping of Individual Seeds1[OPEN] , 2016, Plant Physiology.

[10]  S. Tamari,et al.  Optimum design of the constant-volume gas pycnometer for determining the volume of solid particles , 2004 .

[11]  M. Kashaninejad,et al.  Effect of Moisture Content on Physical Properties of Barley Seeds , 2012 .

[12]  M. Imanishi,et al.  Measurement of combustion-chamber volume using an acoustic resonance technique , 1994, Conference Proceedings. 10th Anniversary. IMTC/94. Advanced Technologies in I & M. 1994 IEEE Instrumentation and Measurement Technolgy Conference (Cat. No.94CH3424-9).

[13]  Hanno Scharr,et al.  3D Surface Reconstruction of Plant Seeds by Volume Carving: Performance and Accuracies , 2016, Frontiers in plant science.

[14]  Nathan Hughes,et al.  Non-destructive, high-content analysis of wheat grain traits using X-ray micro computed tomography , 2017, Plant Methods.

[15]  Allan J. Zuckerwar,et al.  Acoustics: Sound Fields and Transducers , 1954 .

[16]  Thomas Neuberger,et al.  Surveying the plant's world by magnetic resonance imaging. , 2012, The Plant journal : for cell and molecular biology.

[17]  E. Keng Air and belium pycnometer , 1969 .

[18]  K. R. Bhattacharya,et al.  Some physical properties of paddy and rice and their interrelations , 1972 .

[19]  Emile S. Webster,et al.  The Use of Helmholtz Resonance for Measuring the Volume of Liquids and Solids , 2010, Sensors.

[20]  Richard Szeliski,et al.  A Comparison and Evaluation of Multi-View Stereo Reconstruction Algorithms , 2006, 2006 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'06).

[21]  Richard Szeliski,et al.  Building Rome in a day , 2009, 2009 IEEE 12th International Conference on Computer Vision.

[22]  N. Dan Drug release through liposome pores. , 2015, Colloids and surfaces. B, Biointerfaces.