Improving toughness of epoxy asphalt binder with reactive epoxidized SBS

[1]  Z. Yuan,et al.  Influence of thermal shock on the performance of B-staged epoxy bond coat for orthotropic steel bridge pavements , 2021 .

[2]  Ru Chen,et al.  Development of eco-friendly fire-retarded warm-mix epoxy asphalt binders using reactive polymeric flame retardants for road tunnel pavements , 2021 .

[3]  Sabu Thomas,et al.  Compatibilization of epoxidized triblock copolymer on the generation of self‐assembled nanostructured epoxies and their surface wettability , 2021 .

[4]  Zengping Zhang,et al.  A laboratory study of epoxy/polyurethane modified asphalt binders and mixtures suitable for flexible bridge deck pavement , 2021 .

[5]  Junsheng Zhang,et al.  Microstructure and dynamic mechanical properties epoxy/asphaltene composites , 2021, Journal of Thermal Analysis and Calorimetry.

[6]  Yifan Sun,et al.  Thermal and bonding properties of epoxy asphalt bond coats , 2021, Journal of Thermal Analysis and Calorimetry.

[7]  Bo Zhang,et al.  Influence of polyethylene glycol (PEG) chain on the performance of epoxy asphalt binder and mixture , 2020 .

[8]  Junsheng Zhang,et al.  Laboratory investigation on the microstructure and performance of SBS modified epoxy asphalt binder , 2020 .

[9]  Jinghai Li,et al.  Laboratory evaluation of warm-mix epoxy SBS modified asphalt binders containing Sasobit , 2020 .

[10]  Junsheng Zhang,et al.  Toughening epoxy asphalt binder using core-shell rubber nanoparticles , 2020 .

[11]  Junsheng Zhang,et al.  Impact of waste cooking oil on the viscosity, microstructure and mechanical performance of warm-mix epoxy asphalt binder , 2020 .

[12]  Ruiling Jiang,et al.  Improving the compatibility of cold-mixed epoxy asphalt based on the epoxidized soybean oil , 2020 .

[13]  Yifan Sun,et al.  Mechanical and bonding properties of pristine montmorillonite reinforced epoxy asphalt bond coats , 2020 .

[14]  Peiwei Gao,et al.  Development of cold-mix high-toughness resin and experimental research into its performance in a steel deck pavement , 2020 .

[15]  Yongjia Jiang,et al.  Laboratory investigation of epoxy asphalt binder modified by brominated SBS , 2019 .

[16]  Hongfeng Xie,et al.  Performance evaluation of warm mix asphalt additive modified epoxy asphalt rubbers , 2019, Construction and Building Materials.

[17]  Yongjia Jiang,et al.  Performance of epoxy asphalt binder containing warm-mix asphalt additive , 2019, International Journal of Pavement Engineering.

[18]  Ru Chen,et al.  Halogen-free flame retarded cold-mix epoxy asphalt binders: Rheological, thermal and mechanical characterization , 2018, Construction and Building Materials.

[19]  Yifan Sun,et al.  Thermal and mechanical properties of natural fibrous nanoclay reinforced epoxy asphalt adhesives , 2018, International Journal of Adhesion and Adhesives.

[20]  Yifan Sun,et al.  Viscous, damping, and mechanical properties of epoxy asphalt adhesives containing different penetration-grade asphalts , 2018, Journal of Applied Polymer Science.

[21]  Yongjia Jiang,et al.  Microstructures, thermal and mechanical properties of epoxy asphalt binder modified by SBS containing various styrene-butadiene structures , 2018, Materials and Structures.

[22]  Hao Pang,et al.  Reactive block copolymers for the toughening of epoxies: Effect of nanostructured morphology and reactivity , 2018, Journal of Macromolecular Science, Part A.

[23]  Jing Zhang,et al.  Investigation of secondary phase separation and mechanical properties of epoxy SBS-modified asphalts , 2018 .

[24]  Xiaoming Du,et al.  Modification of alkyl group terminated hyperbranched polyester on paving epoxy asphalt , 2018 .

[25]  Zhonghua Xi,et al.  Laboratory investigation of the properties of epoxy asphalt rubber (EAR) , 2017 .

[26]  Ru Chen,et al.  Ethylene vinyl acetate copolymer modified epoxy asphalt binders: Phase separation evolution and mechanical properties , 2017 .

[27]  Zhiyong Wei,et al.  Highly toughened polylactide/epoxidized poly(styrene-b-butadiene-b-styrene) blends with excellent tensile performance , 2016 .

[28]  C. Ocando.  Chapter 6 Chemically Functionalized Block Copolymers as Reactive Modifiers for Nanostructuring and Toughening Epoxy Thermosetting Materials , 2016 .

[29]  Chaoen Yin,et al.  Cracking Mechanism and Repair Techniques of Epoxy Asphalt on Steel Bridge Deck Pavement , 2016 .

[30]  Yifan Sun,et al.  Organic montmorillonite reinforced epoxy mortar binders , 2016 .

[31]  Z. Qian,et al.  Development and performance evaluation of epoxy asphalt concrete modified with mineral fiber , 2016 .

[32]  Yifan Sun,et al.  Performance of hot mix epoxy asphalt binder and its concrete , 2015 .

[33]  Yifan Sun,et al.  Brucite modified epoxy mortar binders: Flame retardancy, thermal and mechanical characterization , 2015 .

[34]  Yingfeng Yu,et al.  Effect of curing conversion on the water sorption, corrosion resistance and thermo-mechanical properties of epoxy resin , 2015 .

[35]  Yifan Sun,et al.  Thermal, mechanical properties, and low‐temperature performance of fibrous nanoclay‐reinforced epoxy asphalt composites and their concretes , 2014 .

[36]  Yifan Sun,et al.  Flame retardancy, thermal, and mechanical properties of mixed flame retardant modified epoxy asphalt binders , 2014 .

[37]  G. Kortaberria,et al.  Dispersion of carbon nanotubes in nanostructured epoxy systems for coating application , 2014 .

[38]  B. Birgisson,et al.  Polymer modification of bitumen : Advances and challenges , 2014 .

[39]  Sabu Thomas,et al.  Reaction-Induced Phase Separation and Thermomechanical Properties in Epoxidized Styrene-block-butadiene-block-styrene Triblock Copolymer Modified Epoxy/DDM System , 2014 .

[40]  Yifan Sun,et al.  Thermal, damping, and mechanical properties of thermosetting epoxy-modified asphalts , 2014, Journal of Thermal Analysis and Calorimetry.

[41]  V. Causin,et al.  Morphological and Mechanical Characterization of Nanostructured Thermosets from Epoxy and Styrene-block-Butadiene-block-Styrene Triblock Copolymer , 2013 .

[42]  A. Taylor,et al.  The microstructure and fracture performance of styrene–butadiene–methylmethacrylate block copolymer-modified epoxy polymers , 2013, Journal of Materials Science.

[43]  I. Mondragon,et al.  Nanostructured Thermoplastic Elastomers Based on SBS Triblock Copolymer Stiffening with Low Contents of Epoxy System. Morphological Behavior and Mechanical Properties , 2013 .

[44]  Sabu Thomas,et al.  Cure kinetics and thermal stability of micro and nanostructured thermosetting blends of epoxy resin and epoxidized styrene-block-butadiene-block-styrene triblock copolymer systems , 2012 .

[45]  G. Michler,et al.  Effect of Epoxidation of Diene Component of SBS Block Copolymer on Morphology and Mechanical Properties , 2012 .

[46]  Z. Qian,et al.  Research on Low Temperature Performance of Epoxy Asphalt Mixture , 2010 .

[47]  I. Mondragon,et al.  Micro‐ and macrophase separation of thermosetting systems modified with epoxidized styrene‐block‐butadiene‐ block‐styrene linear triblock copolymers and their influence on final mechanical properties , 2008 .

[48]  J. Pomposo,et al.  Nanostructured Thermosetting Systems by Modification with Epoxidized Styrene-Butadiene Star Block Copolymers. Effect of Epoxidation Degree , 2006 .

[49]  J. Masson,et al.  Glass transitions and mixed phases in block SBS , 2005 .

[50]  J. Pomposo,et al.  Synthesis and Characterization of Epoxidized Styrene‐Butadiene Block Copolymers as Templates for Nanostructured Thermosets , 2004 .

[51]  R. Tsiang,et al.  Epoxidation of partially hydrogenated styrene‐butadiene block copolymers using peracetic acid in a cyclohexane/water heterogeneous system , 1996 .

[52]  A. S. Hay,et al.  Catalytic epoxidation of styrene–butadiene triblock copolymer with hydrogen peroxide , 1991 .

[53]  Jen-Ming Yang,et al.  Epoxidation of styrene–butadiene–styrene block copolymer and use for gas permeation , 1990 .

[54]  G. Hsiue,et al.  Dynamic mechanical and dielectric properties of epoxidized SBS triblock copolymer , 1989 .

[55]  Takashi Inoue,et al.  Structure development in epoxy resin modified with poly(ether sulphone) , 1989 .

[56]  C. Venturello,et al.  Quaternary ammonium tetrakis(diperoxotungsto)phosphates(3-) as a new class of catalysts for efficient alkene epoxidation with hydrogen peroxide , 1988 .

[57]  D. A. Thomas,et al.  Characterization of the area under loss modulus and tan δ–temperature curves: Acrylic polymers and their sequential interpenetrating polymer networks , 1987 .

[58]  D. Żuchowska.  Polybutadiene modified by epoxidation. 1. Effect of polybutadiene microstructure on the reactivity of double bonds , 1980 .

[59]  H. Keskkula,et al.  The significance of the rubber damping peak in rubber-modified polymers , 1971 .

[60]  J. Ferry.  Viscoelastic properties of polymers , 1961 .

[61]  G. Michler,et al.  Chemical modification of SBS star block copolymer for templating nanostructures in epoxy resin blends , 2020 .

[62]  A. Molenaar,et al.  Characterisation of Some Candidate Surfacing Materials for Orthotropic Steel Bridge Decks , 2005 .

[63]  Y. Mai,et al.  Failure mechanisms in toughened epoxy resins—A review , 1988 .