Compliant mechanisms design based on pairs of curves

The success of compliant mechanism design by structural topology optimization approach depends, to a large extent, on its structural geometry representation scheme. In this work, a novel representation scheme based on pairs of curves is presented. In the representation, the structure is characterized by a set of input/output (I/O) regions. While it is still unknown how the rest of the design space will be occupied by the structure, the I/O regions must exist somewhere because any structure must have parts which interact with its surroundings by way of at least one loading region, one support region, and one output region. For a valid structural design, pairs of Bezier curves are used to connect I/O regions in order to form one single connected load-bearing structure. The boundary is explicitly described, so the need for smoothening of the blurred and jagged edges can be avoided by developing such a representation scheme to directly generate smooth boundary structures. With the scheme, shape and topology can be optimized simultaneously, and the obtained topology solutions have no check-board phenomena nor intermediate zones. A multi-objective genetic algorithm is then applied to couple with the representation scheme for defining and encoding the structural geometry in the form of graph. The solution framework is integrated with a nonlinear fixed grid finite element method (FG-FEM) code for large-displacement analyses of the compliant structures. Simulation results from a displacement inverter indicated that the proposed representation scheme is appropriate.

[1]  Harvey J. Greenberg,et al.  Automatic design of optimal structures , 1964 .

[2]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[3]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[4]  Kazuhiro Saitou,et al.  Genetic algorithms as an approach to configuration and topology design , 1994, DAC 1993.

[5]  G. K. Ananthasuresh.  A new design paradigm for micro-electro-mechanical systems and investigations on the compliant mechanisms synthesis. , 1994 .

[6]  Grant P. Steven,et al.  Fixed grid finite elements in elasticity problems , 1999 .

[7]  Mary Frecker,et al.  Topology optimization of compliant mechanisms with multiple outputs , 1999 .

[8]  J. Sethian,et al.  Structural Boundary Design via Level Set and Immersed Interface Methods , 2000 .

[9]  Kang Tai,et al.  Design of structures and compliant mechanisms by evolutionary optimization of morphological representations of topology , 2000 .

[10]  J. E. Akin,et al.  Enhancing structural topology optimization , 2001 .

[11]  Qing Li,et al.  A simple checkerboard suppression algorithm for evolutionary structural optimization , 2001 .

[12]  Kalyanmoy Deb,et al.  Multi-objective optimization using evolutionary algorithms , 2001, Wiley-Interscience series in systems and optimization.

[13]  T. Ray,et al.  Design Synthesis of Path Generating Compliant Mechanisms by Evolutionary Optimization of Topology and Shape , 2002 .

[14]  Dongwoo Sheen,et al.  Checkerboard‐free topology optimization using non‐conforming finite elements , 2003 .

[15]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[16]  Xianmin Zhang,et al.  TOPOLOGY OPTIMOZATION OF COMPLIANT MECHANISMS , 2003 .

[17]  J. F. Aguilar Madeira,et al.  Multi-objective optimization of structures topology by genetic algorithms , 2005, Adv. Eng. Softw..

[18]  Michael Yu Wang,et al.  Design of multimaterial compliant mechanisms using level-set methods , 2005 .

[19]  G. Allaire,et al.  Structural optimization using topological and shape sensitivity via a level set method , 2005 .

[20]  Zhen Luo,et al.  THEORETICAL AND ALGORITHMIC ON TOPOLOGY OPTIMIZATION DESIGN OF DISTRIBUTED COMPLIANT MECHANISMS , 2006 .

[21]  Kang Tai,et al.  Design of Grip-and-Move Manipulators Using Symmetric Path Generating Compliant Mechanisms , 2008 .

[22]  Michael Yu Wang,et al.  Compliant Mechanism Optimization: Analysis and Design with Intrinsic Characteristic Stiffness , 2009 .

[23]  Guimin Chen.  Degree of Freedom of Planar Compliant Mechanisms , 2010 .

[24]  Zhang Xianmin.  Reliability-based Topology Optimization of Compliant Mechanisms by Using Foundation Structure Approach , 2010 .

[25]  Ming Zhao.  Numerical Analysis of Dynamic Surface-deformation of Fully-penetrated Gas Tungsten Arc Welding Molten Pool , 2010 .

[26]  Kang Tai,et al.  Design of 2-DOF Compliant Mechanisms to Form Grip-and-Move Manipulators for 2D Workspace , 2010 .

[27]  K. Tai,et al.  Target matching problems and an adaptive constraint strategy for multiobjective design optimization using genetic algorithms , 2010 .