The EWMA median chart with estimated parameters

ABSTRACT The usual practice in control charts is to assume that the chart parameters are known or can be accurately estimated from in-control historical samples and the data are free from outliers. Both of these assumptions are not realistic in practice: a control chart may involve the estimation of process parameters from a very limited number of samples and the data may contain some outliers. In order to overcome these issues, in this article, we develop an Exponentially Weighted Moving Average (EWMA) median chart with estimated parameters to monitor the mean value of a normal process. We study the run length properties of the proposed chart using a Markov Chain approach and the performance of the proposed chart is compared to the EWMA median chart with known parameters. Several tables for the design of the proposed chart are given in order to expedite the use of the chart by practitioners. An illustrative example is also given along with some recommendations about the minimum number of initial subgroups m for different sample sizes n that must be collected for the estimation of the parameters so that the proposed chart has identical performance as the chart with known parameters. From the results we deduce that (i) there is a large difference between the known and estimated parameters cases unless the initial number of subgroups m is large; and (ii) the difference between the known and estimated parameters cases can be reduced by using dedicated chart parameters.

[1]  Vaidyanathan Ramaswami,et al.  Introduction to Matrix Analytic Methods in Stochastic Modeling , 1999, ASA-SIAM Series on Statistics and Applied Mathematics.

[2]  Philippe Castagliola,et al.  Computational Statistics and Data Analysis an Ewma Chart for Monitoring the Process Standard Deviation When Parameters Are Estimated , 2022 .

[3]  Tom Burr,et al.  Introduction to Matrix Analytic Methods in Stochastic Modeling , 2001, Technometrics.

[4]  Philippe Castagliola,et al.  Some Recent Developments on the Effects of Parameter Estimation on Control Charts , 2014, Qual. Reliab. Eng. Int..

[5]  P. Maravelakis,et al.  A CUSUM control chart for monitoring the variance when parameters are estimated , 2011 .

[6]  D. A. Evans,et al.  An approach to the probability distribution of cusum run length , 1972 .

[7]  Ying Zhang,et al.  RUN RULES $\bar{X}$ CHARTS WHEN PROCESS PARAMETERS ARE UNKNOWN , 2010 .

[8]  Subhabrata Chakraborti,et al.  Robustness of the EWMA control chart for individual observations , 2011 .

[9]  Philippe Castagliola.  An (X/R)-EWMA Control Chart for Monitoring the Process Sample Median , 2001 .

[10]  Marion R. Reynolds,et al.  Shewhart x-charts with estimated process variance , 1981 .

[11]  Frederick S. Hillier,et al.  X-Bar- and R-Chart Control Limits Based on A Small Number of Subgroups , 1969 .

[12]  Gemai Chen,et al.  THE MEAN AND STANDARD DEVIATION OF THE RUN LENGTH DISTRIBUTION OF X̄ CHARTS WHEN CONTROL LIMITS ARE ESTIMATED Gemai Chen , 2003 .

[13]  L. Allison Jones,et al.  The Statistical Design of EWMA Control Charts with Estimated Parameters , 2002 .

[14]  Philippe Castagliola,et al.  The median chart with estimated parameters , 2013 .

[15]  Marcel F. Neuts,et al.  Matrix-geometric solutions in stochastic models - an algorithmic approach , 1982 .

[16]  E. Castillo.  Computer Programs -- Evaluation of Run Length Distribution for X Charts with Unknown Variance , 1996 .

[17]  D. Hawkins.  Self‐Starting Cusum Charts for Location and Scale , 1987 .

[18]  S. Psarakis,et al.  EFFECT OF ESTIMATION OF THE PROCESS PARAMETERS ON THE CONTROL LIMITS OF THE UNIVARIATE CONTROL CHARTS FOR PROCESS DISPERSION , 2002 .

[19]  Gemai Chen,et al.  The run length distributions of the R, s and s2 control charts when is estimated , 1998 .

[20]  S. W. Roberts,et al.  Control Chart Tests Based on Geometric Moving Averages , 2000, Technometrics.

[21]  Charles W. Champ,et al.  The Performance of Exponentially Weighted Moving Average Charts With Estimated Parameters , 2001, Technometrics.

[22]  Willis A. Jensen,et al.  Design issues for adaptive control charts , 2008, Qual. Reliab. Eng. Int..

[23]  Charles W. Champ,et al.  Effects of Parameter Estimation on Control Chart Properties: A Literature Review , 2006 .

[24]  Charles W. Champ,et al.  Designing Phase I ―X Charts with Small Sample Sizes , 2004 .

[25]  Subha Chakraborti.  Parameter estimation and design considerations in prospective applications of the X¯ chart , 2006 .

[26]  Charles P. Quesenberry,et al.  The Effect of Sample Size on Estimated Limits for and X Control Charts , 1993 .

[27]  Robert V. Hogg,et al.  Certain Uncorrelated Statistics , 1960 .

[28]  Joseph J. Pignatiello,et al.  On Estimating X-bar Control Chart Limits , 2001 .

[29]  Giovanni Celano,et al.  THE EXACT RUN LENGTH DISTRIBUTION AND DESIGN OF THE S2 CHART WHEN THE IN-CONTROL VARIANCE IS ESTIMATED , 2009 .

[30]  Charles P. Quesenberry,et al.  DPV Q charts for start-up processes and short or long runs , 1991 .

[31]  Z. Yanga,et al.  On the Performance of Geometric Charts with Estimated Control Limits , 2011 .

[32]  S. W. Roberts.  Control chart tests based on geometric moving averages , 2000 .

[33]  Joseph J. Pignatiello,et al.  On Estimating X̄ Control Chart Limits , 2001 .