Characterization of signal via structure in multilayer printed circuit boards up to 50 GHz

Interconnects in the latest servers need a transmission capability of tens of gigabits per second (Gbps) for high-speed digital circuits. For the system board in servers, the impact of losses in through-hole vias on the performance is large in the region of tens of Gbps. In this paper, we discuss the capability of 100 Gbps electrical signal transmission in typical through-hole vias in a system board. After the simulation model and the simulation results are validated by measurements, the causes of losses are analyzed in detail on the basis of the simulations. Consequently, it is confirmed that the reflection and the radiation losses are dominant. To reduce the reflection and radiation losses, we investigate the signal via structures and ground and differential via structures, respectively. As a result, it is clarified that these losses can be reduced by designing the above mentioned structures appropriately.

[1]  Jong-Gwan Yook,et al.  Optimization of via structure in multilayer PCB for high speed signal transmission , 2008, 2008 Electrical Design of Advanced Packaging and Systems Symposium.

[2]  E. R. Pillai,et al.  Coax via-A technique to reduce crosstalk and enhance impedance match at vias in high-frequency multilayer packages verified by FDTD and MoM modeling , 1997 .

[3]  T. Sarkar,et al.  Wideband frequency-domain characterization of FR-4 and time-domain causality , 2001, IEEE Transactions on Electromagnetic Compatibility.

[4]  Ban-Leong Ooi,et al.  Via design optimisation for high speed device packaging , 1998, Proceedings of 2nd Electronics Packaging Technology Conference (Cat. No.98EX235).

[5]  Xiaoxiong Gu,et al.  The viability of 25 Gb/s on-board signalling , 2008, 2008 58th Electronic Components and Technology Conference.

[6]  C. Schuster,et al.  DesignCon 2006 Developing a “ Physical ” Model for Vias , 2005 .

[7]  T. Kushta An electromagnetic bandgap structure based on a periodic arrangement of via-to-stripline transitions in a multilayer board , 2009, 2009 European Microwave Conference (EuMC).