A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system (HCBS). Two valve-controlled PI controllers, which include a proportional feedforward controller based on fuzzy set-point weighting following and a limited semi-integrator(LSI), are designed respectively. LSI is used to limit output signal and to prevent wind up at the low frequency of the spectrum. By using a range camera and an electronic feedback control, the tip damping on the HCBS can be adjusted artificially. A collaborative control simulation technique of HOPSAN and MATLAB/SIMULINK is applied to the controller design. Simulation results show that the proposed PI control system has less overshoot as well as faster response. The tip damping on the HCBS during operation is improved.
[1]
Chuen-Chien Lee,et al.
Fuzzy logic in control systems: fuzzy logic controller. II
,
1990,
IEEE Trans. Syst. Man Cybern..
[2]
Monika Ivantysynova,et al.
An Overview about Active Oscillation Damping of Mobile Machine Structure
,
2004
.
[3]
Tore Hägglund,et al.
Automatic Tuning of Pid Controllers
,
1988
.
[4]
Chang-Chieh Hang,et al.
Improvement of transient response by means of variable set point weighting
,
1996,
IEEE Trans. Ind. Electron..
[5]
Petter Krus,et al.
Efficient Collaborative Modelling and Simulation with Application to Wheel Loader Design
,
2004
.