A Transflective Nano-Wire Grid Polarizer Based Fiber-Optic Sensor

A transflective nano-wire grid polarizer is fabricated on a single mode fiber tip by focused ion beam machining. In contrast to conventional absorptive in-line polarizers, the wire grids reflect TE-mode, while transmitting TM-mode light so that no light power is discarded. A reflection contrast of 13.7 dB and a transmission contrast of 4.9 dB are achieved in the 1,550 nm telecom band using a 200-nm wire grid fiber polarizer. With the help of an optic circulator, the polarization states of both the transmissive and reflective lights in the fiber may be monitored simultaneously. A kind of robust fiber optic sensor is thus proposed that could withstand light power variations. To verify the idea, a fiber pressure sensor with the sensitivity of 0.24 rad/N is demonstrated. The corresponding stress-optic coefficient of the fiber is measured. In addition to pressure sensing, this technology could be applied in detecting any polarization state change induced by magnetic fields, electric currents and so on.

[1]  George R. Bird,et al.  The Wire Grid as a Near-Infrared Polarizer , 1960 .

[2]  D. Payne,et al.  The stress-optic effect in optical fibers , 1983, IEEE Journal of Quantum Electronics.

[3]  Yan-qing Lu,et al.  Miniaturized fiber taper reflective interferometer for high temperature measurement. , 2010, Optics express.

[4]  E. Polnau,et al.  Polarimetry of transmission gratings. , 1995, Applied optics.

[5]  Yijun Feng,et al.  Polarization beam splitting through an anisotropic metamaterial slab realized by a layered metal-dielectric structure , 2008 .

[6]  D. Jackson.  Monomode optical fibre interferometers for precision measurement , 1985 .

[7]  W B Spillman,et al.  Multimode fiber-optic pressure sensor based on the photoelastic effect. , 1982, Optics letters.

[8]  T. Williams,et al.  Radiolysis of Tri-n-butyl Phosphate , 1957, Nature.

[9]  R.L. King,et al.  Information services for smart grids , 2008, 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century.

[10]  Y. Namihira,et al.  Effect of mechanical stress on the transmission characteristics of optical fiber , 1977 .

[11]  Yiping Wang,et al.  In-fiber polarizer based on a long-period fiber grating written on photonic crystal fiber. , 2007, Optics letters.

[12]  Ian Bennion,et al.  High extinction ratio in-fiber polarizers based on 45° tilted fiber Bragg gratings , 2005 .

[13]  Syed Obaid Amin,et al.  RIDES: Robust Intrusion Detection System for IP-Based Ubiquitous Sensor Networks , 2009, Sensors.

[14]  Fei Xu,et al.  A Microfiber Bragg Grating Based on a Microstructured Rod: A Proposal , 2010, IEEE Photonics Technology Letters.

[15]  Yan-qing Lu,et al.  Fiber-Optic Pressure Sensor Based on Tunable Liquid Crystal Technology , 2010, IEEE Photonics Journal.

[16]  David R. Smith,et al.  Metamaterials: Theory, Design, and Applications , 2009 .

[17]  K. Hsu,et al.  Surface-Polariton Fiber Polarizer: Design and Experiment , 1997 .

[18]  J. LARMOR,et al.  Electric Waves , 1903, Nature.

[19]  David J Beebe,et al.  Hydrodynamic microfabrication via"on the fly" photopolymerization of microscale fibers and tubes. , 2004, Lab on a chip.

[20]  Michael Bass,et al.  Handbook of optics , 1995 .

[21]  W. Bock,et al.  Fiber-optic strain-gauge manometer up to 100 MPa , 1991 .

[22]  S. H. Kim,et al.  Fabrication of a 50 nm half-pitch wire grid polarizer using nanoimprint lithography , 2005 .