Process optimization of continuous preparation of carbon nanotubes/carbon fiber multi-scale reinforcement

[1]  Chengguo Wang,et al.  Study on Bimetallic Catalysts for Carbon Nanotube Growth on the Surface of Continuous Carbon Fibres , 2021, ECS Journal of Solid State Science and Technology.

[2]  Chengguo Wang,et al.  Growth of carbon nanotubes on the surface of carbon fiber using Fe–Ni bimetallic catalyst at low temperature , 2021 .

[3]  E. Muñoz-Sandoval,et al.  Synthesis, morphology, magnetic and electrochemical studies of nitrogen-doped multiwall carbon nanotubes fabricated using banded iron-formation as catalyst , 2020 .

[4]  Chengguo Wang,et al.  Interfacial improvement of carbon fiber/epoxy composites using one-step method for grafting carbon nanotubes on the fibers at ultra-low temperatures , 2020 .

[5]  Linbao Zheng,et al.  Uniform growth of carbon nanotubes on carbon fiber cloth after surface oxidation treatment to enhance interfacial strength of composites , 2020 .

[6]  H. Jiang,et al.  Systematic investigation of the catalyst composition effects on single-walled carbon nanotubes synthesis in floating-catalyst CVD , 2019, Carbon.

[7]  Woong‐Ryeol Yu,et al.  Improved tensile strength of carbon nanotube-grafted carbon fiber reinforced composites , 2019, Composite Structures.

[8]  K. Rhee,et al.  Chemical vapor deposition-based grafting of CNTs onto basalt fabric and their reinforcement in epoxy-based composites , 2018, Composites Science and Technology.

[9]  Qingwen Li,et al.  Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite , 2018, Composites Science and Technology.

[10]  M. Tiwari,et al.  Quantitative determination of size and properties of interphases in carbon nanotube-based multiscale composites , 2018, Carbon.

[11]  Junbiao Wang,et al.  Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites , 2018 .

[12]  J. Locquet,et al.  Carbon nanotube-grafted carbon fiber polymer composites: Damage characterization on the micro-scale , 2017 .

[13]  Linbao Zheng,et al.  Studying the growth of carbon nanotubes on carbon fibers surface under different catalysts and electrochemical treatment conditions , 2017 .

[14]  S. Goyanes,et al.  Carbon nanotubes grown on carbon fiber yarns by a low temperature CVD method: A significant enhancement of the interfacial adhesion between carbon fiber/epoxy matrix hierarchical composites , 2017 .

[15]  K. An,et al.  Cure behaviors and mechanical properties of carbon fiber-reinforced nylon6/epoxy blended matrix composites , 2017 .

[16]  Xiao-jie Li,et al.  Interfacial and fatigue-resistant synergetic enhancement of carbon fiber/epoxy hierarchical composites via an electrophoresis deposited carbon nanotube-toughened transition layer , 2017 .

[17]  H. Cui,et al.  Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites , 2016 .

[18]  Fujun Xu,et al.  Tensile and interfacial properties of polyacrylonitrile-based carbon fiber after different cryogenic treated condition , 2016 .

[19]  Heng Zhang,et al.  Directly deposited graphene nanowalls on carbon fiber for improving the interface strength in composites , 2016 .

[20]  Lixin Wu,et al.  Improving the interlaminar properties of polymer composites using a situ accumulation method to construct the multi-scale reinforcement of carbon nanofibers/carbon fibers , 2015 .

[21]  Hejun Li,et al.  Compressive and interlaminar shear properties of carbon/carbon composite laminates reinforced with carbon nanotube-grafted carbon fibers produced by injection chemical vapor deposition , 2015 .

[22]  Scott Payne,et al.  Lignin-based carbon fibers: Carbon nanotube decoration and superior thermal stability , 2014 .

[23]  Xiaodong He,et al.  The role of grafting force and surface wettability in interfacial enhancement of carbon nanotube/carbon fiber hierarchical composites , 2014 .

[24]  Woong‐Ryeol Yu,et al.  Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface , 2013 .

[25]  Chunxiang Lu,et al.  Preparation of vertically aligned carbon nanotube arrays grown onto carbon fiber fabric and evaluating its wettability on effect of composite , 2011 .

[26]  M. Zupan,et al.  Improvements in interlaminar strength: A carbon nanotube approach , 2011 .

[27]  Daniel C. Davis,et al.  An experimental study of interlaminar shear fracture toughness of a nanotube reinforced composite , 2011 .

[28]  R. M. Sankaran,et al.  Synergistic Effects in Bimetallic Nanoparticles for Low Temperature Carbon Nanotube Growth , 2008 .

[29]  Bhanu Pratap Singh,et al.  Growth of carbon nanotubes on carbon fibre substrates to produce hybrid/phenolic composites with improved mechanical properties , 2008 .

[30]  C. Shi,et al.  Thermogravimetric analysis and TEM characterization of the oxidation and defect sites of carbon nanotubes synthesized by CVD of methane , 2008 .

[31]  J. Hayashi,et al.  Synthesis of carbon nanotubes on carbon fibers by means of two-step thermochemical vapor deposition , 2006 .

[32]  Tianxiang Li,et al.  Growth mechanism of carbon nanotubes in methane diffusion flames , 2003 .