Coupled Broad Ion Beam-Scanning Electron Microscopy (BIB-SEM) for polishing and three dimensional (3D) serial section tomography (SST).

[1]  P. Withers,et al.  Serial sectioning in the SEM for three dimensional materials science , 2020, Current Opinion in Solid State and Materials Science.

[2]  H. Danielsen,et al.  2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing , 2019, Wear.

[3]  G. Knott,et al.  GCIB-SEM: A path to 10 nm isotropic imaging of cubic millimeter volumes , 2019, bioRxiv.

[4]  S. Yue,et al.  Hierarchical integration of porosity in shales , 2018, Scientific Reports.

[5]  J. Hunt,et al.  IPrep – Automated Serial-Section Broad-Ion-Beam Tomography , 2016, Microscopy and Microanalysis.

[6]  Katherine J. Dobson,et al.  Novel 3D centimetre-to nano-scale quantification of an organic-rich mudstone: The Carboniferous Bowland Shale, Northern England , 2016 .

[7]  M.-H. Evans,et al.  An updated review: white etching cracks (WECs) and axial cracks in wind turbine gearbox bearings , 2016 .

[8]  M. G. Burke,et al.  Large volume serial section tomography by Xe Plasma FIB dual beam microscopy. , 2016, Ultramicroscopy.

[9]  K. Stadler,et al.  A Review: The Dilemma With Premature White Etching Crack (WEC) Bearing Failures , 2015 .

[10]  K. Kunze.  Crystal orientation measurements using SEM–EBSD under unconventional conditions , 2015, Powder Diffraction.

[11]  McLean P. Echlin,et al.  The TriBeam system: Femtosecond laser ablation in situ SEM , 2015 .

[12]  A. L. Eberle,et al.  High-resolution, high-throughput imaging with a multibeam scanning electron microscope , 2015, Journal of microscopy.

[13]  M.-H. Evans,et al.  Confirming subsurface initiation at non-metallic inclusions as one mechanism for white etching crack (WEC) formation , 2014 .

[14]  S. Haigh,et al.  Correlative Tomography , 2014, Scientific Reports.

[15]  P. F. F. Walker,et al.  Improving the reliability of highly loaded rolling bearings: The effect of upstream processing on inclusions , 2014 .

[16]  Robert J.K. Wood,et al.  Effect of hydrogen on butterfly and white etching crack (WEC) formation under rolling contact fatigue (RCF) , 2013 .

[17]  Robert J.K. Wood,et al.  A FIB/TEM study of butterfly crack formation and white etching area (WEA) microstructural changes under rolling contact fatigue in 100Cr6 bearing steel , 2013 .

[18]  F. Pérez-Willard,et al.  Argon broad ion beam tomography in a cryogenic scanning electron microscope: a novel tool for the investigation of representative microstructures in sedimentary rocks containing pore fluid , 2013, Journal of microscopy.

[19]  M. Echlin,et al.  A new TriBeam system for three-dimensional multimodal materials analysis. , 2012, The Review of scientific instruments.

[20]  H. K. D. H. Bhadeshia,et al.  Steels for bearings , 2012 .

[21]  M.-H. Evans.  White structure flaking (WSF) in wind turbine gearbox bearings: effects of ‘butterflies’ and white etching cracks (WECs) , 2012 .

[22]  Andreas Bechmann,et al.  CFD simulations of the MEXICO rotor , 2011 .

[23]  D. T. McDonald,et al.  An investigation of dynamic recrystallisation on Cu–Sn bronze using 3D EBSD , 2010 .

[24]  Roumen Petrov,et al.  EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under Rolling Contact Fatigue (RCF) , 2010 .

[25]  D. T. McDonald,et al.  A 3D EBSD Investigation of Dynamic Recrystallisation in a Cu-Sn Bronze , 2009, Microscopy and Microanalysis.

[26]  T. Belmonte,et al.  Tailored aluminium oxide layers by bipolar current adjustment in the Plasma Electrolytic Oxidation (PEO) process , 2007 .

[27]  D. D. Winter,et al.  Measurements and calculations of FIB milling yield of bulk metals , 2007 .

[28]  Andrew M. Minor,et al.  Introduction to focused ion beams: Instrumentation, theory, techniques and practice By Lucille A. Giannuzzi and Fred A. Stevie Springer, New York, 2005 ISBN 038723116-1; hard cover; 347 pages, $79.95 , 2006 .

[29]  K. Hiraoka,et al.  Study on Flaking Process in Bearings by White Etching Area Generation , 2006 .

[30]  D. Raabe,et al.  Investigation of orientation gradients around a hard Laves particle in a warm-rolled Fe3Al-based alloy using a 3D EBSD-FIB technique , 2006 .

[31]  W. Denk,et al.  Serial Block-Face Scanning Electron Microscopy to Reconstruct Three-Dimensional Tissue Nanostructure , 2004, PLoS biology.

[32]  P. Luksch,et al.  New developments in the Inorganic Crystal Structure Database (ICSD): accessibility in support of materials research and design. , 2002, Acta crystallographica. Section B, Structural science.

[33]  A. Matthews,et al.  Plasma electrolysis for surface engineering , 1999 .

[34]  P. Withers,et al.  Broad ion beam serial section tomography. , 2017, Ultramicroscopy.

[35]  Georgios A. Skrimpas,et al.  Advantages on monitoring wind turbine nacelle oscillation. , 2015 .

[36]  Lucille A. Giannuzzi,et al.  Introduction to Focused Ion Beams , 2005 .

[37]  G. Lawes,et al.  Scanning Electron Microscopy and X-Ray Microanalysis , 1987 .

[38]  P. C. Becker.  Microstructural changes around non-metallic inclusions caused by rolling-contact fatigue of ball-bearing steels , 1981 .