Theoretical and Experimental Analysis of the Steady Flow Across the Cylinderhead of a Low-Capacity Engine

[1]  Saiful Bari,et al.  Improving Air-Fuel Mixing in Diesel Engine Fuelled by Higher Viscous Fuel Using Guide Vane Swirl and Tumble Device (GVSTD) , 2013 .

[2]  Stephan Schmidt,et al.  Design of a Tumble-Orientated Intake Port Layout for a Gasoline Combustion Process Used in Power Sport Application , 2011 .

[3]  Michel A. Saad,et al.  Compressible Fluid Flow , 1985 .

[4]  Federico Brusiani,et al.  Assessment of the Influence of Intake Duct Geometrical Parameters on the Tumble Motion Generation in a Small Gasoline Engine , 2012 .

[5]  Federico Brusiani,et al.  3D CFD Analysis of the Influence of Some Geometrical Engine Parameters on Small PFI Engine Performances – the Effects on the Tumble Motion and the Mean Turbulent Intensity Distribution , 2014 .

[7]  Peter Priesching,et al.  LES Simulation of Direct Injection SI-Engine In-Cylinder Flow , 2012 .

[8]  X. Margot,et al.  A Methodology to Estimate the Swirl Number at TDC In DI Diesel Engines: Through the Combination of CFD and Steady Flow Rig Results , 2004 .

[9]  Kun Li,et al.  Predictive Design for Intake Port of HPD Diesel Engine , 2011 .

[10]  Raymond A. Bair,et al.  A Numerical Investigation on Scalability and Grid Convergence of Internal Combustion Engine Simulations , 2013 .

[11]  J. Westerweel,et al.  Particle Image Velocimetry for Complex and Turbulent Flows , 2013 .

[12]  X. Margot,et al.  CFD modeling of the in-cylinder flow in direct-injection Diesel engines , 2004 .

[13]  Hans-Erik Ångström,et al.  Optical Study of Swirl during Combustion in a CI Engine with Different Injection Pressures and Swirl Ratios Compared with Calculations , 2012 .